Characteristic-value analysis for plastic dynamic buckling of columns under elastoplastic compression waves

The characteristic-value analysis of plastic dynamic buckling is presented for columns under the action of elastoplastic compression wave caused by an axial-step load. Two critical conditions constituting a dynamic instability criterion are derived on the basis of transformation and conservation of energy. The governing equations, the boundary conditions and the continuity conditions derived by the use of the first critical condition are the same as those given by the adjacent-equilibrium criterion and are insufficient for determining two characteristic parameters involved in the governing equations. A supplementary restraint equation for buckling deformations at the plastic-wave front and the elastic-wave front is derived by the use of the second critical condition. Then, a couple of characteristic equations for two characteristic parameters are derived on the condition that the governing equations have non-trivial solutions satisfying the boundary conditions, the continuity conditions and the supplementary restraint equation. The critical-load parameters, dynamic characteristic parameter (exponent parameter of inertia term) and dynamic buckling modes are calculated from the solutions of the characteristic equations.     

On the Lagrange problem about the optimal form for circular hollow columnsSur le problème de Lagrange de la forme optimale d'une colonne circulaire aux parois minces

A new approach to the problem of finding the form of the strongest clamped circular column with thin walls of fixed volume and height is proposed. The same model describes also the form of the horizontal beam with rectangular vertical sections of a fixed height and variable widths. The existence and the uniqueness of the optimal column are proved here for the first time and the optimal form is found. To cite this article: Yu.V. Egorov, C. R. Mecanique 331 (2003).     

Recovery of small electromagnetic inhomogeneities from partial boundary measurementsIdentification de petites inhomogénéités diélectriques à partir de mesures partielles

We consider for the inverse problem of identifying locations and certain properties of the shapes of small dielectric inhomogeneities in a homogeneous background medium from boundary measurements on part of the boundary or dynamic boundary measurements for a finite time interval. Using as weights particular background solutions we develop asymptotic methods based on appropriate averaging of the data. To cite this article: H. Ammari, A.G. Ramm, C. R. Mecanique 330 (2002) 199–205.     

Flow past an axisymmetric body embedded in a saturated porous mediumÉcoulement derrière un corps à symétrie axiale plongé dans un milieu poreux saturé

The problem of viscous fluid past an axisymmetric body embedded in a fluid saturated porous medium is studied using the Brinkman's extension. A general formula for the drag on the body is derived in the form of a limit of an expression involving the stream function characterizing the flow. The flow past an axisymmetric approximate sphere is also considered. The stream function in this case is obtained in terms of Bessel functions and Gegenbauer's functions. The drag acting on the body is evaluated by using the formula derived. Its variation is studied with respect to geometric and permeability parameters. The special cases of flow past a sphere and a spheroid are obtained from the present analysis. To cite this article: D. Srinivasa Charya, J.V. Ramana Murthy, C. R. Mecanique 330 (2002) 417–423.     

Une technique de lissage de données basée sur la théorie de la régularisationA filter technique based on regularization theory

A simple filter technique based on the regularization theory is presented. We consider the problem as an optimization one. The regularization theory gives us a suitable theoretical framework to define a functional to minimize. We make a numerical comparation between this method and a classical Fourier technique. To cite this article: J.-M. Fullana, C. R. Mecanique 330 (2002) 647–652.     

DNS of premixed turbulent V-flame: coupling spectral and finite difference methods

To allow for a reliable examination of the interaction between velocity fluctuations, acoustics and combustion, a novel numerical procedure is discussed in which a spectral solution of the Navier–Stokes equations is directly associated to a high-order finite difference fully compressible DNS solver (sixth order PADE). Using this combination of high-order solvers with accurate boundary conditions, simulations have been performed where a turbulent premixed V-shape flame develops in grid turbulence. In the light of the DNS results, a sub-model for premixed turbulent combustion is analyzed. To cite this article: R. Hauguel et al., C. R. Mecanique 333 (2005).     

The step-wise martensite to austenite reversible transformation

The step-wise martensite to austenite reversible transformation (SMART) in shape memory alloys (SMA) is a martensitic thermoelastic transformation where a step-wise kinetics is induced by a partial cycling procedure within the hysteresis cycle (incomplete cycle on heating (ICH) procedure). The ICH procedure has been proved effective in inducing a reversible microstructural modification of the martensitic phase. Results till now obtained both on the SMART behaviour and on the effects of the ICH procedure are reviewed here: the hypotheses advanced till now are discussed to explain experimental evidences.

---

Sommario Con l'acronimo di SMART (step-wise martensite to austenite reversible transformation) si indica una trasformazione martensitica termoelastica in cui la cinetica di trasformazione risulta modificata dall'esecuzione di un'appropriata procedura di ciclaggio termico parziale (procedura ICH — Incomplete Cycle on Heating) nell'intervallo di temperatura in cui ha luogo la trasformazione martensitica inversa. Vengono qui presentati i risultati sperimentali relativi sia alla SMART sia agli effetti indotti dalla procedure ICH e responsabili delle modifiche della cinetica di trasformazione. Vengono inoltre discusse le ipotesi sino ad ora avanzate per spiegare i risultati sperimentali.

     

Normal form for librational curves of the standard map

We present a method for constructing analytic expansions approximating librational invariant curves in the case of the so-called generalized standard map. After some preliminary changes of variables, we apply a direct Birkhoff normal form to a fixed order. The resulting system describes homotopically trivial invariant curves close to a periodic orbit. We investigate the stability of the librational curves applying a numerical method developed by J. Greene.

---

Sommario Presentiamo un metodo per la costruzione di espansioni analitiche, adatte a descrivere le curve invarianti di librazione nel caso della standard map generalizzata. Dopo aver effettuato alcuni cambiamenti preliminari di variabili, calcoliamo la forma normale di Birkhoff ad un ordine fissato. Il sistema risultante descrive curve invarianti attorno ad orbite periodiche. Studiamo la stabilità di tali curve di librazione tramite un metodo numerico sviluppato da J. Greene.

     

Dynamic Buckling of Autonomous Systems Having Potential Energy Universal Unfoldings of Cuspoid Catastrophe

This work deals with dynamic buckling universal solutions of discrete nondissipative systems under step loading of infinite duration. Attention is focused on total potential energy functions associated with universal unfoldings of cuspoid type catastrophes with one active coordinate. The fold, dual cusp and tilted cusp catastrophes under statically applied loading occurring via limit points, asymmetric/symmetric bifurcations and nondegenerate hysteresis points are extended to the case of dynamic loading. Catastrophe manifolds of these types showing imperfection sensitivity under both types of loading are fully assessed. Important findings regarding dynamic buckling of imperfect systems generated by perfect systems associated with imperfect bifurcations are explored. The analysis is supplemented by a numerical application of a system exhibiting imperfect bifurcation when it is perfect as well as a hysteresis point associated with a tilted cusp catastrophe, when it becomes imperfect.     

Global stability analysis of parametrically excited cylindrical shells through the evolution of basin boundaries

In the present study, the large-amplitude vibrations and stability of a perfect circular cylindrical shell subjected to axial harmonic excitation in the neighborhood of the lowest natural frequencies are investigated. Donnell's shallow shell theory is used and the shell spatial discretization is obtained by the Ritz method. An efficient low-dimensional model presented in previous publications is used to discretize the continuous system. The main purpose of this work is to discuss the use of basins of attraction as a measure of the reliability and safety of the structure. First, the nonlinear behavior of the conservative system is discussed and the basin structure and volume is understood from the topologic structure of the total energy and its evolution as a function of the system parameters. Then, the behavior of the forced oscillations of the harmonically excited shell is analyzed. First the stability boundaries in force control space are obtained and the bifurcation events connected with these boundaries are identified. Based on the bifurcation diagrams, the probability of parametric instability and escape are analyzed through the evolution and erosion of basin boundaries within a prescribed control volume defined by the manifolds. Usually, basin boundaries become fractal. This together with the presence of catastrophic subcritical bifurcations makes the shell very sensitive to initial conditions, uncertainties in system parameters, and initial imperfections. Results show that the analysis of the evolution of safe basins and the derivation of appropriate measures of their robustness is an essential step in the derivation of safe design procedures for multiwell systems.