Dynamic ultrasound-assisted extraction of polyphenols in tobacco

A novel extraction method, namely dynamic ultrasound-assisted extraction, is investigated. This technique is efficient with respect to both time and solvent consumption because it utilizes ultrasonic energy in dynamic mode during extraction. Polyphenols (chlorogenic acid, esculetin, rutin, scopoletin, and quercitrin) are extracted from a tobacco (Nicotina tobaccum L.) sample for 10 min with 6 mL of solvent. Fresh solvent is continuously pumped through the sample, with which the analytes can be rapidly extracted, and the possibility of degradation efficiently avoided. Methanol involving 0.5% w/v ascorbic acid was used as extraction solvent; optimal flow rate and extraction time were investigated. The extract was cleaned up by C18 disposable cartridge. The spiked and nonspiked tobacco samples were used for the evaluation of the proposed method. Recoveries obtained were varied from 96 to 108% and RSDs from 2.0 to 4.6%. This extraction technique was revealed to recover larger amounts of polyphenols from tobacco, compared to the static ultrasound-assisted extraction method.     

Design of a new molecule that exhibits observable CD spectra under σ-σ* excitation: 2,6-Disilyl-2,6-disilaspiro[3.3]heptanes

Abstract

We previously designed and prepared the first molecules to exhibit observable CD spectra by n-σ* excitation, 2,6-dithiaspiro[3.3]heptane 2,6-dioxide. Spiro[3.3]heptane frameworks possess axial asymmetry due to puckering of 2 four-membered rings; the ring bonds are rich in p-character due to acute bond angles, which lowers the σ* energy levels. In contrast, the lone pairs are rich in s-character, which results in a good donor with conformational fixation. We expected that, instead of lone pairs as donating orbitals, the use of σ-electron-donating Si-Si bonds should result in UV absorption in the observable range (>180?nm), so that the Cotton effect could appear, at least partially, in that range. We designed 2,6-disilyl-2,6-disilaspiro[3.3]heptanes as models, and performed theoretical calculations to confirm our idea.     

Asymmetric Arrangement of Monolayer in the Multilayer Films of 2-Hydroxy-4,4''''-dihexyloxy-azobenzene

IntroductionConstructionoffunctionalmolecularunitsintostruc turallywell definedsupramolecularassemblieshasattract edgreatattentionduetotheirpotentialapplicationsincomplexelectronicstructuresandmoleculardevices .1 5Amongthevariousfunctionalorganicmolecules ,azoben zenederivativeshavebeenwidelystudiedbecauseoftheirinterestingphotoresponsivebehavior .6 11Extensivestudieshaveshownthatsuitablydesignedazobenzenederivativescanformlongrangeorderedarrangementoftwo orthree dimensionalmolecularlatticeat…     

对DSC单峰纯度测定法的评述

指出了当前流行的差示扫描量热法DSC单峰法测样品纯度所基于的假定有一些不确切的地方,并用计算机动态摸拟了DSC实验过程,结果证实了本文的论断。     

Production of micron-sized monodispersed composite polymer particles by seeded polymerization utilizing the dynamic swelling method

 In order to develop the seeded polymerization technique utilizing the dynamic swelling method (DSM) proposed by authors for the production of micron-sized mono-dispersed “composite” polymer particles consisting of two kinds of polymers, the seeded polymerization for the dispersion of ethyl methacry-late (EMA)-swollen PS particles prepared utilizing DSM was carried out. Monodispersed PS/poly(ethyl methacrylate) (PEMA) composite particles having 7 μm in diameter were produced by the addition of NaCl to lower the solubility of EMA in medium and by the addition of CuCl₂ as a water-soluble inhibitor to depress the by-production of submicron-sized PEMA particles. Received: 16 July 1996 Accepted: 10 October 1996     

New dynamic axial compression columns with means for monitoring floating adapter position. Column design and utilisation in low pressure LC on soft packings

Summary The design of new dynamic, axial-compression columns with a system for continous packed bed adjustment and monitoring of the floating adapter position is described. The columns are meant for liquid chromatography at low pressures (up to 8 bar) in aqueous and organic media with stationary phases of all types. The columns have adapter position pickups for continuous automatic monitoring of the bed height (original “swellographic” monitoring). The column described with gas pressurisation was tested with soft Sephadex G-10 and G-25. In spite of the reduction in external porosity there was no dramatic increase in back-pressure. The column proved to provide long-term stability of the packed bed and improvement in resolution. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Ab initio calculation of 4-ClC6H4CH2Cl and peculiarities of electron density distribution in this molecule

Ab initio calculation of the 4-ClC₆H₄CH₂Cl molecule was performed by the restricted Hartree-Fock method in the split valence 6–31 G* basis set with complete optimization of its geometry. Populations of p-orbitals of atoms of this molecule were analyzed.³⁵Cl NQR frequencies and asymmetry parameters of the electric field gradient on³⁵Cl nuclei were estimated on the basis of the populations of valent p-orbitals of CI atoms and their components. Good conformity with the experimental values was obtained when only less diffuse components of p-orbitals were used in calculations of populations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 823–826, April, 1996.     

A density-functional calculation of dynamic dipole polarizabilities of noble gas atoms

Using a very simple trial function and unperturbed electron densities calculated by a new procedure, the frequency-dependent dipole polarizability () of Ne, Ar, Kr and Xe has been calculated in the range 0 0.45 a.u., by a Karplus-Kolker-type variation-perturbation method. Results progressively worsen for larger systems so that, for Xe, (0) is only 75% of the experimental value. Probable reasons for this are discussed.     

The relationship between the linear (oscillatory) and nonlinear (steady-state) flow properties of a series of polymer and colloidal systems

The Cox-Merz empirical relationship between the linear (oscillatory) and nonlinear (steady-state) viscosities has been shown to be valid for many polymeric systems. Here, we present an equivalent expression to relate the linear (G) and nonlinear (N ₁) elastic properties of viscoelastic systems. Like the Cox-Merz relationship, it uses a combination of elastic and viscous parameters. The modified form of the storage modulus is then equivalent to the Cox-Merz complex viscosity. It can be used to correlate with (half) the normal force at numerically equal circular frequency and shear rate, respectively.This new expression and the Cox-Merz rule are tested for a range of polymeric and colloidal systems. It is found that both expression work for the polymeric systems considered, but fail for the colloidal systems. In the latter, the steady state values of viscosity and elasticity are consistently low, and replacing them by the complex viscosity and our new elastic expression only makes matters worse.For polymer systems, we suggest this is a general but not universal observation, since we are aware of exceptions to the rule that polymeric systems obey the Cox-Merz rule for viscosity and our rule for elasticity. For colloidal systems we find that neither rule is obeyed for any of our systems.     

MCM-41分子筛负载钼钴系催化剂的噻吩HDS研究

通过氧吸附量、噻吩吸附热及反应速率常数的测定，研究了MoO3/MCM-41、MoO3-CoO(NiO)/MCM-41系列催化剂，发现，对于MoO3/MCM-41催化剂，当MoO3的质量分数（以MCM－41为底数，即MCM－41＝1g时，MoO3含量为0．15g，下同）从15％增加到20％时，其噻吩的加氢硫（HDS）活性增大，至25％时活性下降，所对应的氧吸附量（mL/g催化剂）也是先增大后减少，并且两者有很好的线性对应关系，而且噻吩吸附热则基本保持不变，采用不同的MoO3-CoO(NiO)浸渍顺序制备的MoO3-CoO(NiO)/MCM-41催化剂中，先浸渍CoO(NiO）再浸渍MoO3的催化剂，其噻吩HDS活性明显优于对其它浸渍顺序制备的催化剂，同时催化剂的氧吸附量和噻吩吸附热也最大。