蓝光存储偶氮染料及偶氮金属染料的研究进展

综述了可用于新一代高密度光盘的蓝光存储偶氮染料和偶氮金属染料的研究进展,重点阐述了蓝光存储偶氮染料和偶氮金属染料的结构、性能和应用,并对其发展趋势作了展望。     

Wells–Dawson polyoxometelates [HP2W18–nMonO62]Fe2.5, xH2O; n = 0, 6: Synthesis,spectroscopic characterization and catalytic application for oxidation of dyes

The synthesis, IR, ³¹P NMR and cyclic voltammetry characterizations of new Wells–Dawson-type heteropolyanions that contain iron, HFe_2.5P₂W₁₈O₆₂, 23H₂O and HFe_2.5P₂W₁₂Mo₆O₆₂, 22 H₂O, are reported. The catalytic activity of these compounds was evaluated through the oxidation of methyl violet dye, by hydrogen peroxide. The influence of different parameters such as the initial pH, the initial H₂O₂ concentration, the catalyst mass, and the initial dye concentration have been studied.     

Heavy metals and color retention by a synthesized inorganic membrane

In this study, a new type of a double-layer ceramic membrane was used for the filtration of wastewater. The synthesized membrane consists of a macroporous substrate (with pore size of about 0.1 μm) prepared following the colloid filtration technique and a thin film functional layer (with pore size of about 10 nm) carried out according to the sol–gel preparation method.The ceramic membranes were tested for the removal of cadmium, zinc, Methylene Blue and Malachite Green from water under a pressure of 5 bar and a treatment time of 2 h. Liquid filtration and flow tests through these membranes resulted in a rejection rate of 100% for Methylene Blue and Malachite Green. This paper also presents the ability of the tubular membrane prepared to separate heavy metals (cadmium and zinc) from their synthetic aqueous solutions. The influence of the applied pressure, feed solute concentration, feed pH on the rejection of cadmium and zinc ions was studied. Retention rates of cadmium and zinc ions of 100% were observed for an initial feed concentration of 10⁻⁴ mol/L.     

Graphene-Oxide-Based Fluoro- and Chromo-Genic Materials and Their Applications

Composite materials and their applications constitute a hot field of research nowadays due to the fact that they comprise a combination of the unique properties of each component of which they consist. Very often, they exhibit better performance and properties compared to their combined building blocks. Graphene oxide (GO), as the most widely used derivative of graphene, has attracted widespread attention because of its excellent properties. Abundant oxygen-containing functional groups on GO can provide various reactive sites for chemical modification or functionalization of GO, which in turn can be used to develop novel GO-based composites. This review outlines the most recent advances in the field of novel dyes and pigments encompassing GO as a key ingredient or as an important cofactor. The interactions of graphene with other materials/compounds are highlighted. The special structure and unique properties of GO have a great effect on the performance of fabricated hybrid dyes and pigments by enhancing the color performance of dyes, the anticorrosion properties of pigments, the viscosity and rheology of inks, etc., which further expands the applications of dyes and pigments in dyeing, optical elements, solar-thermal energy storage, sensing, coatings, and microelectronics devices. Finally, challenges in the current development as well as the future prospects of GO-based dyes and pigments are also discussed. This review provides a reference for the further exploration of novel dyes and pigments.     

Exciton Interactions,Excimer Formation,and [2π+2π] Photodimerization in Nonconjugated Curcuminoid-BF2 Dimers

We describe the synthesis of a series of covalently linked dimers of quadrupolar curcuminoid-BF₂ dyes and the detailed investigation of their solvent-dependent spectroscopic and photophysical properties. In solvents of low polarity, intramolecular folding induces the formation of aggregated chromophores, the UV/Vis absorption spectra of which display the optical signature characteristic of weakly-coupled H-aggregates. The extent of folding and, in turn, of ground-state aggregation is strongly dependent on the nature of the flexible linker. Steady-state and time-resolved fluorescence emission spectroscopies show that the Frenkel exciton relaxes into a fluorescent symmetrical excimer state with a long lifetime. Furthermore, our in-depth studies show that a weakly emitting excimer lies on the pathway toward a photocyclomer. Two-dimensional ¹H NMR spectroscopy and density functional theory (DFT) allowed the structure of the photoproduct to be established. To our knowledge, this represents the first example of a [2π+2π] photodimerization of the curcuminoid chromophore.     

The use of Raman microscopy and laser desorption ionization mass spectrometry in the examination of synthetic organic pigments in modern works of art

Synthetic organic pigments are widely used in modern and contemporary works of art. They have been examined by a variety of techniques including spectroscopic methods such as Fourier transform infrared spectroscopy, Raman, and X‐ray powder diffraction as well as chromatographic or mass spectrometric techniques such as pyrolysis‐gas chromatography/mass spectrometry and laser desorption ionization mass spectrometry (LDI–MS). Often, a combination of techniques has been used to examine these pigments. This paper describes use of Raman spectroscopy to create a database of colorants including two pigments not previously reported, PO1 and PO2. Then, using Raman spectroscopy in combination with LDI–MS, samples from modern works of art by artists including Mark Rothko, Barnett Newman, and José de Rivera were examined in order to identify the pigments present. One finding was that Rothko used a variety of red pigments over the course of his career including PR11 which has not been previously reported in artwork, and PO2 found with its positional isomer PR1. Knowledge of the colorants serves to inform conservators about display and treatment decisions. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.     

Complexation and Fluorescence of Tricyclic Basic Dyes Encapsulated in Cucurbiturils

Tricyclic basic dyes (proflavine, acridine orange, pyronine, pyronine Y, oxonine, thionine and methylene blue) often form one‐to‐one or two‐to‐one complexes with CB[7] and CB[8], respectively. In the case of pyronine Y, the complexes with CB[7] and CB[8] have a one‐to‐one and three‐to‐one stoichiometry, respectively. The binding constants for CB[7] complexes range from 3.07×10⁶ to 1.70×10⁷ m ^?1. In the case of CB[8], the association constant varies between 3.24×10¹³ and 2.50×10¹⁶ m ^?2. Overall, these binding constants are four orders of magnitude higher than those reported for the same dyes in β and γ‐cyclodextrins. Formation of the host–guest complexes leads to an increase in the fluorescence quantum yields in the case of CB[7], while the dimeric or trimeric dye encapsulated in CB[8] are remarkably less fluorescent than the same dye in diluted solutions.     

Functionalized Alkynylplatinum(II) Polypyridyl Complexes for Use as Sensitizers in Dye‐Sensitized Solar Cells

A series of platinum(II) alkynyl‐based sensitizers has been synthesized and found to show light‐to‐electricity conversion properties. These dyes were developed as sensitizers for the application in nanocrystalline TiO₂ dye‐sensitized solar cells (DSSCs). Their photophysical and electrochemical properties were studied. The excited‐state property was probed using nanosecond transient absorption spectroscopy, which showed the formation of a charge‐separated state that arises from the intramolecular photoinduced charge transfer from the platinum(II) alkynylbithienylbenzothiadiazole moiety (donor) to the polypyridyl ligand (acceptor). A lifetime of 3.4 μs was observed for the charge‐separated state. A dye‐sensitized solar cell based on one of the complexes showed a short‐circuit photocurrent of 7.12 mA cm^?2, an open circuit voltage of 780 mV, and a fill factor of 0.65, thus giving an overall power conversion efficiency of 3.6 %.     

Effect of synthesis pH on the physicochemical properties of a synthesized Bi2WO6 and the type of substrate chosen,in assessing its photo-catalytic activities

Crystalline orthorhombic Bi₂WO₆ powders were synthesized by a hydrothermal method from aqueous solutions of Bi(NO₃)₃·5H₂O and Na₂WO₄·2H₂O over a range of three selected pH values (2.0, 5.0 and 7.0), using NaOH as precipitating agent. The as-prepared catalysts were characterized by XRD, BET, FE-SEM, TEM, XPS and UV-vis spectroscopy. The effect of pH-synthesis on crystallinity, morphologies, surface area and optical absorption properties, were investigated. Although the pH has a marked influence on morphology, the nature of the precipitating agent (NaOH or TEA) also influences the morphology and surface structure composition, as it is observed in the present work. Three different probe molecules were used to evaluate the photo-catalytic properties under two illumination conditions (UV and Visible): Methyl Orange and Rhodamine B were chosen as dye substrates and Phenol as a transparent substrate. The photo-catalytic activities are strongly dependent not only on the pH used in the synthesis but also on the nature of the chosen substrate in assessing the photo-catalytic activities. Results were compared with those obtained when using TiO₂(P25, Evonik) in the same experimental conditions. The photo-catalytic activity of one of the synthesised samples has been evaluated by exposing a mixture of Rhodamine B and Phenol in water, to different illumination conditions. Our results provide new evidences about the issue of whether dyes are suitable substrates to assess the activity of a photo-catalyst.     

Theoretical Insight into the Origin of Large Stokes Shift and Photophysical Properties of Anilido‐Pyridine Boron Difluoride Dyes

The geometric and electronic structures and photophysical properties of anilido‐pyridine boron difluoride dyes 1 – 4 , a series of scarce 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) derivatives with large Stokes shift, are investigated by employing density functional theory (DFT) and time‐dependent DFT (TD‐DFT) calculations to shed light on the origin of their large Stokes shifts. To this end, a suitable functional is first determined based on functional tests and a recently proposed index—the charge‐transfer distance. It is found that PBE0 provides satisfactory overall results. An in‐depth insight into Huang–Rhys (HR) factors, Wiberg bond indices, and transition density matrices is provided to scrutinize the geometric distortions and the character of excited states pertaining to absorption and emission. The results show that the pronounced geometric distortion due to the rotation of unlocked phenyl groups and intramolecular charge transfer are responsible for the large Stokes shift of 1 and 2 , while 3 shows a relatively blue‐shifted emission wavelength due to its mild geometric distortion upon photoemission, although it has a comparable energy gap to 1 . Finally, compound 4 , which is designed to realize the rare red emission in BODIPY derivatives, shows desirable and expected properties, such as high Stokes shift (4847 cm^?1), red emission at 660 nm, and reasonable fluorescence efficiency. These properties give it great potential as an ideal emitter in organic light‐emitting diodes. The theoretical results could complement and assist in the development of BODIPY‐based dyes with both large Stokes shift and high quantum efficiency.