2-芳基吲哚的敏化光氧化偶合反应

本文研究了十七种2-芳基吲哚(1a-1q)在甲醇-乙酸介质中的亚甲基蓝(MB)敏化光氧化反应, 发现有十五种吲哚(1a-1o)以85%-95%的产率给出2,2'-二芳基-[2,3'-联-1H-吲哚]-3(2H)-酮(2a-2o), 而2-(4-硝基苯基]吲哚(1p)和2-联苯基吲哚(1q)则分别生成2-甲氧基-2-(4-硝基苯基)-1,2-二氢-3H-吲哚-3-酮(7p)和2-联苯基-4H-3,1-苯并恶嗪-4-酮(11q), 其中7p在分离过程中失去甲醇分子给出2-(4-硝基苯基)-3H-吲哚-3-酮(10p)。     

Solar energy conversion from water photolysis by biological and chemical systems

The production of chemicals and fuels, or energy-rich compounds, from water by sunlight is described as a particularly attractive means for the conversion of solar energy to a valuable renewable resource. The redox properties of photoexcited molecules and the operating mechanism of light-driven systems are first considered. The mechanism of water oxidation carried out by higher plants and green algae-which is actually one of the most important biochemical reactions—as well as that of artificial photosystems, up-to-now designed trying to simulate the natural process with higher efficiency and simplicity, are likewise discussed. A number of biological and chemical light-driven systems are presented as practical ways to solar energy conversion.     

Stabilization of dyes against hydrolytic decomposition by the formation of inclusion compounds

The decomposition reactions of the dyes phenol blue and murexide were measured spectroscopically in acidic solution at different temperatures. From these reaction rates and their temperature dependence in the absence and presence of various hosts, the stability constants and the reaction enthalpies of the dye complexes with noncyclic dextrins, cyclodextrins and cucurbituril were calculated.-Cyclodextrin enhances the stability of phenol blue in acidic solution. This effect is even more pronounced with cucurbituril. Due to the molecular structure of murexide this dye cannot form inclusion complexes with hosts containing hydrophobic cavities.     

直接甲醇燃料电池阳极电催化剂

直接甲醇燃料电池作为未来清洁的动力能源，由于具有下列优点：操作温度低(<100℃)、燃料易储存和运输、能量效率高、污染低和燃料启动快而受到人们广泛的关注。阳极电催化剂是直接甲醇燃料电池最重要的组成部分。本文综述了近三年来直接甲醇燃料电池阳极电催化剂最新的研究进展，主要对催化剂制备方法、新型碳载体材料、催化剂类型作了详细的评述，展望了未来甲醇电催化氧化催化剂的发展，指出了电催化剂面临的问题。     

Purification and Characterization of DNA Methylase From HL-60 Cells

A solid leukemia sarcoma has been successfully developed after subcutaneous inoculation of the cultured human promyelocytic leukemia cells (HL-60 cells) into unde mice. The solid leukemia sarcoma is a more plantiful source than the cultured cells for enzymatic study and its growing environment is closer to that of the human body than the cultured cells.We establish an efficient procedure of purifying HL-60 cells DNA methylase which includes: disruption of HL-60 cells by homogenization and sonication, removing the cell fragments and cellular particles by centrifuge and ultracentrifuge (105.000 g); removing endogenous DNA by streptomycin sulfate, salting out by (NH4)2SO4, ion exchange chromatography on DEAE-cellulose (DE-52), gel filtration over Sephadex G-100 column.The DNA methylase from HL-60 cells has been purified 204 fold by this procedure. The purified enzyme shows a single-band on PG-PAGE. A 479-kD molecular weight of this enzyme is measured by PG-PAGE. The enzyme properties of HL-60 DNA methylase     

Production and energetic use of biogas from energy crops and wastes in Germany

The production of biogas for reducing fossil CO₂ emissions is one of the key strategic issues of the German government and has resulted in the development of new process techniques and new technologies for the energetic use of biogas. Progress has been made in cultivating energy crops for biogas production, in using new reactor systems for anaerobic digestion, and in applying more efficient technologies for combined heat and power production. Recently, integration of fuel cells within the anaerobic digestion process was started, and new technologies for biogas upgrading and conversion to hydrogen were tested. This article describes the trends in Germany for achieving more efficient energy production.     

Effect of Arylmethylene Substitutions on Molecular Structure,Optoelectronic Properties and Photovoltaic Performance of Dithienocyclopentafluorene-Based Small-Molecule Acceptors

Two dithienocyclopentafluorene-based small-molecule acceptors (SMAs) were developed that feature methylene-functionalized conjugated side chains, to study the effect of arylmethylene substitution and its number on structure, optoelectronic properties and device performance. Results showed that two SMAs have better absorption properties and planarity, lower bandgaps and higher LUMOs compared with the control SMA without conjugated side chains. The synthesized SMAs were tested in polymer solar cells for examples of their applicability. This work argues that the introduction of methylene-functionalized conjugated side chains has great potential in tuning molecular structure, optoelectronic properties, device physics and photovoltaic performance of SMAs.     

Photovoltaic polymers based on difluoroqinoxaline units with deep HOMO levels

We report the synthesis of low bandgap polymers with a difluoroquinoxaline unit by Stille polymerization for use in polymer solar cells (PSCs). A new series of copolymers with 2,3‐didodecyl‐6,7‐difluoro quinoxaline as the electron‐deficient unit and alkyloxybenzo[1,2‐b:4,5‐b′]dithiophene and thiophene as the electron‐rich unit were synthesized. The photovoltaic properties of the devices based on the synthesized polymers revealed that the fluorine atoms at the quinoxaline units aid in decreasing the highest occupied molecular orbital (HOMO) energy levels; this in turn increased the open circuit voltage of the devices. The polymers with long alkyl chains exhibited good solubility that increased their molecular weight, but the power conversion efficiency was low. Efficient polymer solar cells were fabricated by blending the synthesized copolymers with PC₇₁BM, and the PCE increased up to 5.11% under 100 mW cm⁻² AM 1.5 illumination. These results demonstrate that the importance of having a control polymer to be synthesized and characterized side by side with the fluorine analogues. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1489–1497     

Efficient organic photovoltaic cells based on thiazolothiazole and benzodithiophene copolymers with π‐conjugated bridges

New donor–π–acceptor (D–π–A) type conjugated copolymers, poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(4‐octylthiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐tTz), and poly[(4,8‐bis((2‐hexyldecyl)oxy)benzo[1,2‐b:4,5‐b′]dithiophene)‐alt‐(2,5‐bis(6‐octylthieno[3,2‐b]thiophen‐2‐yl)thiazolo[5,4‐d]thiazole)] (PBDT‐ttTz) were synthesized and characterized with the aim of investigating their potential applicability to organic photovoltaic active materials. While copolymer PBDT‐tTz showed a zigzagged non‐linear structure by thiophene π‐bridges, PBDT‐ttTz had a linear molecular structure with thieno[3,2‐b]thiophene π‐bridges. The optical, electrochemical, morphological, and photovoltaic properties of PBDT‐tTz and PBDT‐ttTz were systematically investigated. Furthermore, bulk heterojunction photovoltaic devices were fabricated by using the synthesized polymers as p‐type donors and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester as an n‐type acceptor. PBDT‐ttTz showed a high power conversion efficiency (PCE) of 5.21% as a result of the extended conjugation arising from the thienothiophene π‐bridges and enhanced molecular ordering in the film state, while PBDT‐tTz showed a relatively lower PCE of 2.92% under AM 1.5 G illumination (100 mW/cm²). © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1978–1988     

Color Bricks: Building Highly Organized and Strongly Absorbing Multicomponent Arrays of Terpyridyl Perylenes on Metal Oxide Surfaces

Terpyridine‐substituted perylenes containing cyclic anhydrides in the peri position were synthesized. The anhydride group served as an anchor for assembly of the terpyridyl‐crowned chromophores as monomolecular layers on metal oxide surfaces. Further coordination with Zn²⁺ ions allowed for layer‐by‐layer formation of supramolecular assemblies of perylene imides on the solid substrates. With properly selected anchor and linker molecules it was possible to build high quality structures of greater than ten successive layers by a simple and straightforward procedure. The prepared films were stable and had a broad spectral coverage and high absorbance. To demonstrate their potential use, the synthesized dyes were employed in solid‐state dye‐sensitized solar cells, and electron injection from the perylene antennas to titanium dioxide was observed.