合成丙交酯中微量水分分析

合成丙交酯中微量水分分析徐溢，柳胜春（重庆大学化工学院分析教研室６３００４４）关键词丙交酯，微量水，定量分析丙交酯是人工合成骨材料聚乳酸的合成中间体，其性能决定着合成产品的品质，要获得高质量的合成材料，对中间体的分析和监测十分重要。一般要求丙交酯中间...     

PHASE INVERSION AND ITS MECHANICAL MODEL STUDIES FOR THE TWO-PHASE POLYMER BLEND SYSTEMS (Ⅱ)——DYNAMIC VISCOELASTIC RESPONSE

The dynamic viscoelastic response of the two-phase polymer blend systems shows the characteristics of the thermorheologically complex materials. In this paper theoretical equations for describing the dynamic viscoelastic response of such polymer blend systems have been established by means of the mechanical modeling technique. The dynamic viscoelastic response of the blend systems at any blend composition can be predicted theoretically by using the equations established, provided that the dynamic viscoelastic response of the two pure components and the mechanical model parameters are known in advance. Thus, we provide an effective method for studying the dynamic mechanical properties and the molecular relaxation characteristics of the two-phase polymer blend systems.     

四元缔合物体系薄层树脂相分离与光度法联用测定痕量钴

提出了在酸性条件下 (pH=5.0),利用阳离子交换树脂-丁二酮肟-碘-钴四元体系,通过薄层树脂相光度法测定钴的新方法。本法灵敏度高 (e454=1.7105L/molcm),比水相光度法提高14倍,精密度理想 (测定2.0礸/ml Co(II) 6次,RSD=1.3%),选择性好。实测药品VB12及天然水中钴,线性范围0.024~2.0礸/ml (定容50ml),检出限10.4ng/ml。     

Reagentless system for sulphite determination based on polyaniline

A new reagentless system for sulphite (or sulphur dioxide) determination is reported based on the use of an organic conducting polymer, polyaniline, and its absorbance variation at 550 nm, depending on the sulphite concentration. After chemical polymerisation of aniline a very thin film of polyaniline is obtained. Although the response is not fully reversible, each film can be used for at least 10 measurements for low analyte concentrations (up to 0.5 mg l⁻¹) and five measurements for higher sulphite concentrations. Moreover, the reproducibility, ease of preparation and low cost of the films, permit the use of a new disposable system for each measurement. When the change in absorbance at 550 nm was measured for 210 s (stabilisation time), the system showed a linear response, which ranged from 0.025 to 1.50 mg l⁻¹ of sulphite. A theory with regard to the reaction mechanism between the polyaniline films and sulphite is also proposed. The system was applied to sulphite determination in wine samples and the results were in agreement with those obtained by the Official Method of Analysis (iodometric titration).     

Synthesis and X-ray analysis of 1-((1S)-phenylethyl)-azetidine-(2R)-piperidinamide

The crystal and molecular structure of a new azetidine-2-carboxylic amide derivative is described. The structure was solved by direct methods and refined by least squares methods toR1=0.0393 for 4264 reflections (withI>2(I)) The structure consists of two independent molecules which are chemically the same with slight differences in geometry. Crystal data: C₁₇H₂₄N₂O, monoclinic, space groupP2₁,a=8.3782(4),b=20.0342(13),c=9.7769(8) Å, =109.687(6)°,V=1545.1(2)ų,Z=4.     

Computer interactive identification system for polycyclic aromatic hydrocarbons in reversed-phase microcolumn liquid chromatography

Summary A computer interactive identification system is proposed which is based on the relationship between retention and molecular properties such as the size and shape of polycyclic aromatic hydrocarbons (PAHs). This system offers an automatic analytical process for liquid chromatography, providing a reliable identification of the separated components. The identification can be further enhanced by the use of multiple detectors such as a multichannel UV detector. The system can be used for optimization procedures, resulting in a highly automatic complex analytical system.     

Pervaporative transport modelling in a ternary system: ethyltertiarybutylether/ethanol/polyurethaneimide

The study deals with the analysis of diffusion and mass transfer modelling during pervaporation in a true ternary system involving a polar liquid mixture (ETBE/EtOH) and a polar block copolymer (polyurethaneimide or PUI). A survey of methods of pervaporative transfer modelling in ternary systems is first developed. From differential permeation experiments carried out with both pure liquids, it appears that both permeants obey a Fickian law. Moreover, the diffusional behaviour is consistent with Long's model, which has thus been assumed for the related ternary system. An extension of the Brun's model is then derived, which takes into account the diffusion coupling as well the significant deviation from sorption ideality. From a practical point of view, the calculated values of fluxes show generally good agreement with the experimental results, although a small deviation occurs for mixtures of low ethanol content. Diffusion coefficients of both pure solvents corresponding to transient or steady state are compared. A very good agreement is found for the aprotic permeant (ETBE). whereas the diffusion coefficient of ethanol in transient state is only the quarter of the value corresponding to steady state. The results are discussed in comparison with related investigations in the literature, involving specific liquid-polymer interactions.     

过氧化氢与N—甲基苯胺盐酸盐引发体系的研究

在水介质中,研究了新型的过氧化氢/N-甲基苯胺盐酸盐引发体系对 AM 与 PVA 的接枝共聚。产物经紫外光谱、红外光谱和 ~1H-核磁共振进行表征,并提出了引发机理。     

Volumetric properties of the water + ethylenediamine mixture at atmospheric pressure from 288.15 to 353.15 K

Densities of the water + ethylenediamine binary system were measured at atmospheric pressure over the whole range of compositions at temperatures from 288.15 to 353.15 K using an Anton Paar digital vibrating glass tube densimeter. Density increases with water content. The experimental excess molar volume data have been correlated with the Redlich-Kister equation, and partial molar volumes calculated at infinite dilution for each component.     

Preparation and stereoselectivity of 1,3-dipolar cycloaddition ofD-glucose-derived nitrones to N-arylmaleimides

Summary Nitrones2 derived fromD-glucose oxime and benzaldehydes without employing any protection of hydroxyl group were isolated in pure state. The 1,3-dipolar cycloaddition of2 to N-arylmaleimides gave predominantly theanti isoxazolidines3 and was rationalized byZ/E isomerization of N-glycosylnitrones2. The structure and steric configuration of the products have been assigned on the basis of¹H- and¹³C-NMR spectroscopy. AM1 calculations of the nitrones and MM2 calculations of the adducts were performed.

---

Darstellung und Stereoselektivität der 1,3-dipolaren Cycloaddition vonD-Glucose-abgeleiteten Nitronen an N-Arylmaleimiden

Zusammenfassung Die Nitrone2 wurden ausD-Glucoseoxim und Benzaldehyden ohne Schutz von Hydroxylgruppen in reinem Zustand erhalten. Die 1,3-dipolare Cycloaddition von2 an N-Arylmaleimiden ergab bevorzugt dieanti-Isoxazolidine3; dies wurde über eineZ/E-Isomerisierung der N-Glycosylnitrone2 rationalisiert. Struktur und Stereochemie wurden auf Basis von¹H- und¹³C-NMR-Spektroskopie ermittelt. Außerdem wurden AM1-Berechnungen an den Nitronen und MM2-Rechnungen an den Addukten ausgeführt.