紫外熔石英元件高精度低缺陷控形控性制造技术研究进展

传统的紫外熔石英元件加工方法本身会引入各类制造缺陷,需要后期加工来消除前期加工带来的缺陷,限制了熔石英元件的加工 质量和加工效率。针对这些问题,课题组提出了采用磁流变、离子束、保形光顺和流体动压抛光等可控柔体加工技术提升熔石英元件的加工效果,并开展了相关研究。主要介绍了课题组在关键技术上取得的重要进展,包括亚纳米精度表面控形制造技术、纳米精度本征表面控性生成方法、熔石英元件高精度低缺陷组合工艺与设备等一系列关键技术。通过探讨关键技术及其发展现状,为未来紫外熔石英元件高精度低缺陷制造技术的发展提供参考。     

Preparation of magnetic polylactic acid microspheres and investigation of its releasing property for loading curcumin

In order to obtain a targeting drug carrier system, magnetic polylactic acid (PLA) microspheres loading curcumin were synthesized by the classical oil-in-water emulsion solvent-evaporation method. In the Fourier transform infrared spectra of microspheres, the present functional groups of PLA were all kept invariably. The morphology and size distribution of magnetic microspheres were observed with scanning electron microscopy and dynamic light scattering, respectively. The results showed that the microspheres were regularly spherical and the surface was smooth with a diameter of 0.55-0.75 μm. Magnetic Fe₃O₄ was loaded in PLA microspheres and the content of magnetic particles was 12 wt% through thermogravimetric analysis. The magnetic property of prepared microspheres was measured by vibrating sample magnetometer. The results showed that the magnetic microspheres exhibited typical superparamagnetic behavior and the saturated magnetization was 14.38 emu/g. Through analysis of differential scanning calorimetry, the curcumin was in an amorphous state in the magnetic microspheres. The drug loading, encapsulation efficiency and releasing properties of curcumin in vitro were also investigated by ultraviolet-visible spectrum analysis. The results showed that the drug loading and encapsulation efficiency were 8.0% and 24.2%, respectively. And curcumin was obviously slowly released because the cumulative release percentage of magnetic microspheres in the phosphate buffer (pH=7.4) solution was only 49.01% in 72 h, and the basic release of curcumin finished in 120 h.     

正硅酸锂陶瓷小球离线释氚实验研究

中国氦冷球床包层(CH HCSB TBM)初步采用Li₄SiO₄陶瓷小球作为氚增殖材料,实验研究了Li₄SiO₄陶瓷小球的中子辐照产氚性能。将冷冻成型法制备的Li₄SiO₄ 陶瓷小球置于反应堆中辐照100min,然后在离线释氚实验平台上进行退火行为研究。实验结果表明,在用He +1% H₂为载气,流速为100mL•min^-1,升温速率为5K•min^-1的实验条件下,氚气(HT+T₂)是Li₄SiO₄陶瓷小球的主要释氚形态,占总氚的70%左右(不包括自由氚中的氚气),在400℃~700℃范围内出现两次释氚峰;氚化水(HTO+T₂O)所占比例小于20%,主要在300℃~500℃的低温段进行释放;氚在800℃前基本释放完,小球退火后的残氚量小于1%。冷冻成型干燥法制备的Li₄SiO₄陶瓷小球在300℃~700℃范围内有较好的释氚性能,氚残留量低,在聚变堆固态氚增殖包层设计中具有一定应用价值。     

Three-dimensional photofabrication with femtosecond lasers for applications in photonics and biomedicine

A status report on rapidly advancing femtosecond laser technology, three-dimensional (3D) microstructuring by multiphoton illumination technique, is given. Taking its origin from multiphoton microscopy, this technique is now becoming an important microfabrication tool. In our work we apply near-infrared Ti:sapphire femtosecond laser pulses (at 800/780 nm) for 3D material processing. When tightly focused into the volume of a photosensitive material (or photoresist), they initiate 2PP process by, for example, transferring liquid into the solid state. This allows the fabrication of any computer generated 3D structure by direct laser “recording” into the volume of photosensitive material. 2PP of photosensitive materials irradiated by femtosecond laser pulses is now considered as enabling technology for the fabrication of 3D photonic crystals and photonic crystal templates. In particular, 2PP allows one to introduce defects at any desired locations, which is crucial for the practical applications. Recently, we studied possible applications of 2PP technique in biomedicine. 2PP is a very interesting technique for the fabrication of drug delivery systems, scaffolds for tissue engineering, and medical implants. These and other biomedical applications of 2PP will be reviewed.     

Teleportation Capability of Six-Qubit Cluster State

Recently Wei-Bo Gao et al. [Phys. Rev. Lett. 104 （2010） 020501]; reported on the creation of a 4-photon 6-qubit cluster state. It is shown this states can be utilized for perfect teleportation of arbitrary three qubit systems and controlled teleportation of an arbitrary two-qubit state. Therefore, the six-qubit cluster state as quantum channels is equivalent to that of maximally six-qubit entangled state.     

盒式方便收放单摆

介绍一种盒式方便收放单摆,内装卷式弹簧和摆绳,收放盒被固定在单摆支架立柱上端,前端开有缺口的摆绳悬挂板处于立柱上部,摆绳自收放盒拉出后陷入摆绳悬挂板前端的缺口中,摆球被连接于摆绳下端,它能使摆绳的收放如同使用钢卷尺一样方便自如,从而既为学生节省了大量无谓的调节时间,又使摆绳长度的测量更准确．该项目已申请国家发明专利（申请号：2006100221584）．     

Preparing of coherent superposition state in serial multi-A-type system by stimulated Raman adiabatic passage

A scheme for creating an arbitrary coherent superposition of two atomic states in serial multi-A-type system is proposed.This technique with the application of a control field is based on the existence of two degenerate dark states and their interaction.The mixing of the dark states can be controlled by changing the relative delay time of the control pulse.One can get any desired superposition by changing the delay time of the control pulse.     

Directivity calculation with experimental verification for a conformal array of underwater acoustic transducers

The radiation directivity of a complicated conformal array of underwater acoustic transducers is presented based on the boundary ＂element method. It includes the element directivity of each transducer, the natural beam pattern and the controlled beam pattern of the transducer array. At first, the boundary element model of the conformal array is built up, and then the boundary condition is exerted on the model according to the design and environment in which the transducer array is used, and the radiation directivity of the conformal array is calculated. An experiment has been done to measure the directivity in an anechoic water tank. The calculated and the experimental results are compared and analyzed. They are consistent to each other. It is shown that the boundary element method together with the detailed calculations is successful to simulate and predict the radiation directivity of an underwater acoustic transducer array.     

Synergistic effects on iodine release in potassium iodide solution by combination of ultrasound and visible light irradiations

Iodine release in potassium iodide solution has been investigated under the irradiations of ultrasound and visible light respectively and simultaneously. We have observed that the amount of iodine liberated under the combined irradiation of ultrasound and visible light is larger than the sum of that under the respective irradiations of ultrasound and visible light, indicating a synergistic effect of ultrasound and visible light irradiations. Based on the investigation of the reaction kinetics of iodine liberated, we have ascribed the synergistic effect to the perfect stirring of the photochemical reactor induced by the applying simultaneous ultrasound. The ideal stirring can result in the homogenization of the primary light effect in the whole reaction medium, which induces the acceleration of the photochemical reaction. On behavior of our knowledge, there are few reports on the investigations of utilizing the combination of ultrasonic energy and light energy to accelerate the reaction yield and rate as well as the kinetics of the reaction.     

骨断裂力学概述

本文涉及近年来骨断裂力学的发展成果.对建立在张开型和剪切型断裂能基础上的方法作了回顾,并讨论了密度、试件厚度和裂纹速度对骨断裂的影响.最后简述了人股骨的试验研究.