新版《高分子化学》解读

旨在剖析祖仁教授主编的《高分子化学》第四版的教学思想和撰写特点,涉及章节、内容的选择和安排、逻辑思维和教学方法,以及一些技术术语等。同时也指出了新版教材的一些印刷错误等。     

一种基于激光直写的水浊度传感结构

提出并制作了一种基于激光照射改变折射率方法的光度比浊度传感单元,综合了导波光学及检测相关知识原理.以UV光敏树脂为基底材料,采用“气体干法”除胶及分步固化的方法获得了该芯片化结构.传感器整个制作过程仅仅需要7~8 min因而使本方法具有很高的效率.由直写成型的单元组建传感系统对标准悬浊液样品进行了实验测试,所得的相关数据在SISO算法神经元网络系统中进行处理,获得了传感器浊度与对应散射系数的关系曲线.通过试剂检验的方法得知实际相对误差在5%左右.     

缩合法合成磁性荧光高分子CdTe@Fe_3O_4/P(NIPAM-co-AA)复合微球及其表征

具有超顺磁性和荧光特性的CdTe@Fe_3O_4/P(NIPAM-co-AA)多功能复合微球是以P(NIPAMco-AA)为模板制备而成.首先,采用溶胀法使模板微球带有磁性;其次,辅助TEOS和APTES两种化学试剂实现对Fe_3O_4/P(NIPAM-co-AA)微球表面的氨基功能化;最后,携带氨基的磁性微球与巯基乙酸修饰的CdTe量子点通过酰胺缩合反应,将量子点键合到磁性微球表面上,最终获得单分散的磁性荧光高分子复合微球.分别采用扫描电子显微镜、透射电子显微镜、倒置荧光显微成像系统、荧光分光光度计以及振动样品磁强计等方法对所获复合材料的结构与性能进行了表征.结果表明:复合微球单分散性良好,平均粒径约为30μm,饱和磁化强度可达5.4emu/g,具有良好的超顺磁性和较高的荧光发光效率.该材料将磁性、荧光结合到微米级高分子共聚物上,不仅解决了纳米粒子分离和处理的困难,而且奠定了多功能材料在生物标记、荧光成像等诸多领域潜在的应用基础.     

Blended polyethylene terephthalate and polyethylene naphthalate polymers for scintillation base substrates

Polyethylene terephthalate (PET) and polyethylene naphthalate (PEN) are both good candidates for use as scintillation base substrates. One advantage is their relatively high density of 1.33 g cm⁻³. To enhance their relative strengths and to mitigate their weaknesses, we blended PET and PEN 1:1 by weight and found that the overall characteristics are improved. The wavelength at maximum emission was 415 nm, the refractive index was 1.61, and the light yield was 0.85 times that of PEN. These results increase the available options for base materials to be used as scintillators.     

Controlled Release of the Dithiocarbamate Ligand From A Polypyrrole Polymer. A Basis For On-Line Electrochemicalycontrolled Derivatisation

Abstract

The development of a novel on-line derivatisation scheme is described. the scheme involves use of a conducting polymeric material into which the derivatising agent is incorporated. the properties of the polymer enable electrochemical controlled release of the reagent into flowing solutions.     

Electrochemical sensors of heavy metals using novel polymer-modified glassy carbon electrodes

Electroanalytical determination of heavy metals using stripping voltammetry is commonly employed and has many advantages over other methods. The sensitivity of the technique is greatly improved by employing different modified electrodes. Seven novel polymer-modified glassy carbon electrodes have been developed in this investigation for the trace analysis of heavy metals such as zinc, cadmium, lead, arsenic, and copper in formulated samples of waters by square wave stripping voltammetry. Very good responses have been observed for all the metals, while all the modified electrodes employed. The poly(3,4-ethylenedioxythiophene)-modified electrode has resulted in very low limit of detection (LOD) value. Comparison is made between literature results of LOD and the results obtained in this study. An independent atomic absorption spectroscopic analysis of the industrial wastewater sample was carried out and the results compared. The suitability of the method for practical application was ascertained by applying the procedure for the wastewater from a plating industry.     

POLY(10-UNDECENOIC ACID) AND SOME OF ITS DERIVATIVES

Commercially available 10-undecenoic acid was esterified with 2,5-dimethylphenol. After the supply of ester was properly complexed, it was polymerized in quantities and in high yield to high molcular polymers. The polymeric esters were hydrolyzed with base to the acid salt, which were converted to the acids. Reactions with 1,1′-carbonyldiimidazole gave polyethylene-based polymeric imidazolids.     

METHACRYLOYL DERIVITIZED HYPERBRANCHED POLYESTER. 1. SYNTHESIS,CHARACTERIZATION, AND COPOLYMERIZATION

Three hyperbranched multi-methacrylates (H20-MMA, H30-MMA and H40-MMA) have been synthesized by reacting Boltorn dendritic polyols with methacrylic anhydride and methacryloyl chloride. Their structures were characterized by FT-IR and NMR (¹H and ¹³C) and molecular weights were measured by GPC. These multi-methacrylates (H-MMAs) mixed well with a variety of monomers such as acrylic acid (AA), methacrylic acid (MA), methyl methacrylate (MMA), 2-hydroxy-ethyl methacrylate (HEMA), tri(ethylene glycol) dimethdimethacrylate (TEGDMA), and bisphenol A glycidyl dimethacrylate (BisGMA). The initial studies on thermal polymerization activities of 10% of H-MMAs with AA, MA, and MMA showed that they gave higher polymerization enthalpy than the corresponding homopolymerization. The resulting materials showed one glass transition temperature, indicating a typical single-phase resin. The H-MMAs can effectively copolymerize with AA, MA, and MMA, with essentially no homopolymers produced, as indicated by acetone extraction studies. This indicated that the hyperbranched multi-methacrylates have the potential to be used as crosslinking agents or modifiers with a number of monomers to produce new thermosets.     

CROSSLINKABLE SILYLDIHYDROARYLENES

ABSTRACT

Crosslinkable silyldihydroarylenes were synthesized starting from 1,4-(dimethylhydrosilyl)dihydronaphthalene and 9,10-(dimethylhydrosilyl) dihydro-anthracene via catalytic addition of the Si-H reactive groups to the unsaturated bond of triethoxyvinylsilane. Subsequent condensation of the alkoxyl groups leads to bridged polysilsequioxanes which could be used to generate protective layers. IR, and ¹H-NMR spectral analyses were performed in order to determine the chemical structure of the bis(triethoxysilylethylene)dihydroarylenes. During crosslinking swelling measurements were performed in order to determine the optimal conditions of the process.     

Cross‐linked Multilayer Polymer‐Clay Nanocomposites and Permeability Properties

Abstract

Electrostatically layered aluminosilicate nanocomposites have been prepared by the sequential deposition of poly(allylamine hydrochloride)/poly(acrylic acid)/poly(allylamine hydrochloride)/saponite (PAH/PAA/PAH/saponite)₁₀ on poly(ethylene terephtalate) (PET) film. Exfoliated saponite nanoplatelets were obtained by extensive shaking, sonication, and centrifugation of a water suspension. To minimize permeability and improve the mechanical integrity, cross‐linking of composite films was carried out at different temperatures. The formation of amide linkage induced through heating was observed by Fourier Transform Infrared (FT‐IR) and x‐ray photoelectron spectroscopy (XPS). The cross‐linking of nanocomposites (PAH/PAA/PAH/saponite)₁₀ showed 60% decrease in permeability of oxygen when compared with the pristine PET substrate film. In contrast, water permeability of the nanocomposite membrane was not affected by heating temperature and deposition cycles.