Model films of cellulose ID – improved preparation method and characterization of the cellulose film

An optimization study of the preparation of spin-coated cellulose model films from the NMMO/DMSO system on silicon wafers has been made. The study shows that the cellulose concentration ID the solution determines the cellulose film thickness and that the temperature of the solution affects the surface roughness. A lower solution temperature results ID a lower surface roughness at cellulose concentrations below 0.8%. Using the described method, ID ID possible to prepare films with thicknesses of 30–90 nm with a constant surface roughness by changing the cellulose concentration, i.e. by dilution with DMSO. On these films, water has a contact angle less than 20° and about 50% of the material can, according to CP/MAS ¹³C-NMR spectroscopy on corresponding fibrous material, be considered to consist of crystalline cellulose ID type material. ID has further been shown that AFM can be used to determine the thickness of cellulose films, ID both dry and wet states. ID this method, the difference ID height between the top surface and the underlying wafer has been measured at an incision made into the cellulose film. The cellulose films have also been spin-coated with the same technique as on the silicon oxide wafer onto the crystal ID a quartz crystal microbalance (QCM). These model films were found to be suitable for swelling measurements with the QCM. The films were very stable during this type of measurement and films with different amounts of charges gave different swelling responses depending on their charges. As expected, films with a higher charge showed a higher swelling.     

Comparison of the properties of chemical cellulose pulps

The literature related to differences between chemical cellulose pulps produced by different pulping processes has been reviewed. Kraft pulps tend to be stronger, particularly in tear strength, while sulfite pulps hydrate and beat more readily. Organosolv pulps tend to mirror the properties of sulfite more than those of kraft pulps. A number of theories have been offered to explain the different properties of the chemical pulps; however, none has been universally accepted. It may be that acidic processes develop weak points in the fibers which are magnified in tear strength losses since, at a constant tensile strength, a 10% loss in fiber strength can lead to a 25–30% loss in tear strength. The effects of acidic pulping may also be magnified in greater fiber breakage and damage in the subsequent refining stages. However, strength improvements for inferior pulps can be realized through post-chemical treatments. Caustic treatments appear to give the greatest improvements, presumably due to increases in acidic group content which results in enhanced swelling properties, and possible subtle reorientation of cell wall polymers. The strength of hornified, recycled fibers can also be enhanced with such treatments, although simple beating will restore considerable strength, but at the expense of drainage rates. It is clear that the processes are complex and involve both the chemistry and physics of the fibers and how these attributes combine to affect the subsequent beating of the fibers for bonding and strength development.     

Model films of cellulose: I. Method development and initial results

This report presents a new method for the preparation of thin cellulosefilms. NMMO (N-methylmorpholine-N-oxide) was used to dissolve cellulose andaddition of DMSO (dimethyl sulfoxide) was used to control viscosity of thecellulose solution. A thin layer of the cellulose solution is spin-coated ontoasilicon oxide wafer and the cellulose is precipitated in deionised water. Thecellulose film is anchored onto the silicon oxide wafer by a saturated polymerlayer. Among many different polymers tested, PVAm (polyvinylamine) and G-PAM(glyoxalated-polyacrylamide) worked well. The preparation of cellulose modelfilms described in this paper resulted in films with thicknesses in the range20–270 nm and the thickness can be controlled by alteringtheconcentration of cellulose solution by addition of different amounts of DMSO.The films were cleaned in deionised water and were found to be free fromsolvents by ESCA analysis and contact angle measurements. The molecular weightdistribution of the cellulose surface material shows that there is only minorbreakdown of the cellulose chains, mainly by cleavage of the longest molecularmass fraction and without creation of low molecular mass oligomers of glucose.     

微针的制备及应用研究

本文主要针对微针的材质、分类、设计、制备与加工方法进行分析,例举了金属、硅、高分子聚合物和一些其他的微针材料。同时也对微针的应用,例如经皮给药的方法、途径、影响进行说明,也对其作用于糖尿病、皮肤病和其他疾病及其复合应用进行了简单分析。高分子聚合物微针和新型微针的发展可以显著提高药物的透皮速率和分子量,但是在安全性上还有待进一步研究。     

Electron-beam stimulation of the reactivity of cellulose pulps for production of derivatives

New alternative technologies for manufacture of cellulose fibers are currently under development. The effect of electron beam irradiation on various types of cellulose pulps have been studied in order to improve the reactivity of raw material for production of cellulose derivatives. Three different types of textile pulps, Alicell (Canada), Borregaard (Norwegian), Ketchikan (USA) and Kraft softwood as well as Kraft hardwood pulps, have been irradiated with 10 MeV electron beam from LAE 13/g linear accelerator with dose 10, 15, 20, 25 and 50 kGy. Electron paramagnetic resonance spectroscopy (ESR) and gel permeation chromatography (GPC) were applied for determination of structural changes in irradiated pulps. Such parameters as viscosity, average degree of polymerization and -cellulose contents were determinated by means of analytical methods. Results of there investigations are presented and discussed.     

Bertimmung des Zinngehaltes von Erztrüben mit Hilfe der Röntgenfluoreszenz-anregung durch eine Radionuklid-Röntgenquelle

Es wird über die Entwicklung einer Meβanordnung zur kontinuierlichen Bestimmung des Sn-Gehaltes von Erztrürben direkt am Produktstromberichtet. Durch rechnerische Abschätzungen, die mit Hilfe eines entsprechenden Rechnerprogramms durchgeführt wurden, konnte ein Fillterverfahren (Anregungsenergie ca. 31 ke V) als die für die diesen Anwendungsfall am besten geeignete Variante des Röntgenfluoreszenzurefahrens ausgewählt werden. Die Einflässe des Meβfensters, der Korngröe, der Trübedichte, derKernladungszahl von Sekundärtarget und Filter werden diskutiert. Die Meβanordnung besteht aus einem Röntgenquelle mit einem ²¹¹ Am-Strahler und einem Sekundärstrahlungstarget. Die Betriebserprobung der Meβanordnung erfolgte im VEB Bergbau- und Hüttenkombinat “Albert Funk”, Betrieb Zinnerz Altenberg.     

Properties and treatments of pulps from recycled paper. Part I. Physical and chemical properties of pulps

The mechanical, physical, and chemical properties of recycled pulps were evaluated after a series of treatments designed to improve and/or modify the pulp characteristics. Tensile strength, bursting strength, and apparent density of the pulps decreased with recycling. However, the tear strength, in most cases, increased after the first recycle and then decreased after the second recycle. Carboxyl content and WRV of pulps also decreased with recycling. Chemical treatments did not increase the bonding ability of recycled pulps and, in most cases, decreased the physical properties of the pulps. Altering the physical state of the cellulose microstructure through additional swelling did not appear to be a significant factor for strength restoration. It may be that the hemicelluloses plan a greater role in recycling than originally thought.     

Properties of cellulose pulps from acidic and basic processes

Research has intensified in recent years on organic solvent pulping processes to supplement or replace conventional pulping processes. One of the main problems with organosolv pulps is the inferior tear strength compared to kraft pulps. An investigation of the properties of two acidic (acetic acid organosolv and acid sulfite) and one basic white spruce pulp (kraft) was carried out to determine factors affecting differences in tear strength. Properties evaluated were lignin and sugar content, mineral composition, ESCA oxygen-to-carbon ratios, acid-base characteristics, water wettabilities, degree of polymerization and crystallinity of cellulose, fiber length and coarseness, and physical properties of the various pulps. Differences in tear strength have been attributed to degradation and changes in the cellulose structure, the hemicellulose-lignin matrix in which the degree of polymerization of hemicelluloses plays the most important role in low yield pulps, and finally, the bonding capacity of the fiber surfaces.     

Evaluation of new organosolv dissolving pulps. Part I: Preparation, analytical characterization and viscose processability

New acidic organosolv pulping processes, such as Acetosolv, Formacell and Milox, promise to have superior potential in terms of purification selectivity and specific investment costs. Consequently, a thorough investigation of these new acidic pulping processes in comparison to state-of-the-art acidic magnesium sulfite technology was conducted. The impact of pulping and bleaching parameters on the physical and chemical characteristics was studied to compare process efficiency and selectivity for each type of pulp made from Eucalypt wood. In addition to a detailed analysis of the chemical composition and physical properties on a molecular and supramolecular level, the TCF-bleached dissolving pulps were tested for their applicability in viscose fiber production. The influence of pulp properties as determined by standard and advanced analytical methods on process performance and selected fiber properties is emphasized.     

Reactivity of dissolving pulp: characterisation using chemical properties, NMR spectroscopy and multivariate data analysis

The reactivity of dissolving pulp was experimentally determined in termsof residual cellulose in viscose. The correlations between 11 chemicalproperties of pulp and filter values and residual cellulose contents of viscosewere then investigated by multivariate data analysis. Both the viscose filtervalue and the residual cellulose were well modelled from the 11 propertiesby partial least squares regression. The results show that pulps with highacetone extractable fractions, high magnesium contents, low alkali resistanceand low viscosity, gave low viscose filter values and low residual cellulosecontents. Pulps with low residual cellulose contents also had low carboxylgroupcontents and low polydispersity. The results are interpreted as that in pulpwith high reactivity, the hemicellulose content is low and that the cellulosechains are shorter and more soluble in alkali. An explanation of the positiveeffect from the high extractive content is that the extractives facilitate thediffusion of carbon disulfide. A principal component analysis of CP/MAS¹³C-NMR spectral data of six pulp samples showed that differences inreactivity between the pulps could be explained by variations in the hydrogenbonds in the cellulose and/or changes in the glucosidic bonds. In a separatestudy electron beam processing enhanced the reactivity, i.e. lowered theresidual cellulose content, of the investigated pulps. The magnitude of theelectron dose, within the tested range (5.4–23.7 kGy), didnotseem to be important, but the reactivity within pulp sheets tended to be ratherinhomogeneous.