流动注射分析中样品分散与反应管长度的关系

根据串联釜模型给出样品分散度与通过管长的关系式，应用此式可以满意地解释分散度随管长的变化。     

PVC基管状流通钾离子选择电极的研制及其在流动注射分析中的应用

实验装置由PVC基管状流通钾离子选择电极和与它结合的流动注射分析体系两部分组成。对该体系的分析特点和影响测定的参数进行了讨论,建立了土壤浸提液中钾测定方法,样品分析结果和火焰光度法有良好一致性。     

痕量铜的合并带法流动注射分析——Fe~(3+)-S_2 O_3~(2-)-Cu~(2+)催化体系

本文基于 Cu~(2+)对三价铁离子与硫代硫酸盐反应生成深紫蓝色物质的褪色反应的催化作用采用流动注射合并带技术,建立了痕量铜(Ⅱ)的快速分析方法。方法的线性范围在0～350μg/L 检出限为10μg/L,相对标准偏差为1.68％,进样频率可达100样次/小时,具有很高的选择性。     

毛细管色谱直接进样法测定白酒中高碳脂肪酸乙酯的研究

介绍了采用ＦＦＡＰ键合毛细管柱直接进样测定白酒中５种高碳脂肪酸乙酯的方法，操作简捷，定量准确，检测限低达０４ｍｇ／Ｌ。用该法测定了各种香型近９０个白酒样品。改变色谱条件后，在一次直接进样分析中除能测定高碳脂肪酸乙酯外，而且还能对白酒中醇、酯、醛、酮以及有机酸等５２种香味组分进行定量测定，结果重现性良好。     

微机控制离子色谱仪自动操作与数据处理系统

用转换器和ＩＢＭＰＣ／ＸＴ微机与Ｄｉｏｎｅｘ２０２０ｉ型离子色谱仪连接组成自动控制与数据处理系统，转换器由８０３１及８２５５等芯片组成，其功能是采集数据和转送数据，软件由汇编及Ｃ语言编制。这套新系统增加了注入／记录同步，分级梯度淋洗，自动连续进样等功能以及很强的数据处理能力。     

Determination of phosphate in hydroponic nutrient solutions using flow injection potentiometry and a cobalt-wire phosphate ion-selective electrode

The direct flow injection potentiometric (FIP) analysis of phosphate in hydroponic nutrient solution has been carried out using a cobalt-wire ion-selective electrode (ISE). Synthetic hydroponic nutrient solution, commercial hydroponic nutrient solution and working hydroponic farm nutrient solution were analysed for phosphate using the FIP technique. It is shown that FIP results compare favourably to standard methods of analysis such as spectrophotometry and indirect photometric ion-pair chromatography. Reproducible FIP response curves with a slope of −(47.57±0.03) mV per decade and intercept of −(169.7±0.1) mV were obtained for four separate calibrations in the concentration range 5.0×10⁻⁴–1.0×10⁻² M H₂PO₄⁻. Anion corrections for interferences by Cl⁻, NO₃⁻ and SO₄²⁻ were applied to all samples using the selectivity coefficients determined independently using a fixed interference method. Nevertheless, it was found that anion corrections were not necessary, as the deviations fell within the bounds of experimental error for the cobalt-wire ISE technique (i.e.±2–5% R.S.D.). The proposed FIP method enables the direct determination of phosphate in hydroponic nutrient solutions.     

Trace analysis of selected benzidine and diaminodiphenylmethane derivates in urine by means of liquid chromatography using precolumn sample preconcentration,UV and electrochemical detection

Summary For the title compounds 4,4-DADPM, MOCA, 3,3-DCB, 4-ADP and 4-ADPA listing on the EPA priority pollutant list, an analytical practicable, reliable, reproducible and sensitive procedure is required. Therefore a new method has been developed for the routine determination of these toxic aromatic amines in urine at the ppb level. The quantitative determination of amines is a suitable procedure of occupationally exposed persons. Urine sample preparation is done using simple liquid-liquid extraction followed by a precolumn enrichment (PRP₁-material; Hamilton). Breakthrough measurements were done using an enrichment column packed with PRP₁ material. The capacities of the studied amines ranged from 21.9mg/g to 96.6mg/g, while influent concentrations differed from 28.3mg/l to 332.0mg/l. The advantages of electrochemical detection regarding to selectivity and sensitivity are clearly indicated in this paper. Separation has been achieved applying reversed-phase-high-performance-liquid chromatography (LiChrosorb RP 18/5m) followed by electrochemical or UV-detection. The detection limits employing an electrochemical detector at a potential of 1 V range from 2.2ng to 12.1ng. UV detection at 254 nm and 280 nm is about 10–100 times less sensitive. Recoveries from spiked water samples at the 5ppb levels were 75% to 96% respectively. The standard deviation of the developed procedure varies from 5.3% to 14%. Day-to-day repeatability is good.     

Flow injection system with in-line Winkler's procedure using 16-way valve and spectrofluorimetric determination of dissolved oxygen in environmental waters

Flow injection spectrofluorimetry with in-line Winklers procedure was developed for the dissolved oxygen (DO) determination. 2-Thionaphthol reacted with iodine produced by Winkler’s method to form fluorescence inactive disulfide compound. To automate the process completely, a 5-channel flow system with a newly designed 16-way valve was assembled. The system consisted of a dispersion coil (DC), a precipitate formation coil (PFC), a precipitate dissolving coil (PDC), and extraction coil (EC). A calibration can be constructed by using a standard iodine solution for dissolved oxygen. The calibration graph was linear over the range 1.2×10⁻⁴∼6.0×10⁻⁴ mol l⁻¹ iodine (1.96∼9.80 mg O l⁻¹)). The relative standard deviation (n=6) was below 0.3% for the 4×10⁻⁴ mol l⁻¹ iodine (6.27 mg O l⁻¹) determination. The sample throughput was 12/h.