Novel flow injection-fluorometric method for the determination of trace silicate and its application to ultrapurified water analysis

A highly sensitive fluorescence quenching method for the determination of silicate based on the formation of an ion associate between molybdosilicate and Rhodamine B (RB) in nitric acid medium was developed. A flow injection system coupled with a fluorescence detector was used for the measurement of fluorescence intensity at 560 and 580 nm as excitation and emission wavelengths, respectively. The calibration graph for Si showed a linear range of 0.1–5 ng cm⁻³ with correlation coefficient of 0.9999, and the detection limit of 0.06 ng cm⁻³. The proposed method was successfully applied to the determination of silicate in ultrapurified water with satisfactory results.     

Spectrofluorimetric determination of guanethidine sulphate,guanfacine hydrochloride,guanoclor sulphate and guanoxan sulphate in tablets and biological fluids,using benzoin

A sensitive and rapid Spectrofluorimetric method for the determination of guanethidine sulphate, guanfacine hydrochloride, guanoclor sulphate and guanoxan sulphate in tablets and spiked human serum and urine samples is described. The method is based on the reaction of monosubstituted guanidino compounds in an aqueous potassium hydroxide solution with benzoin, in the presence of -mercaptoethanol and sodium sulphite. Highly fluorescent derivatives were obtained, with excitation and emission maximum wavelengths around 325 and 430 nm, respectively. In optimal reaction conditions, the linearity ranges were 0.04–0.28 g/ml, with relative standard deviations less than 2%. The method has been successfully applied to the determination of these drugs in tablets. The results are highly correlated with the B.P. method. Chloroform (or for guanoxan dichloromethane) was used to extract the drugs from serum and urine at basic pH, followed by the proposed fluorimetric method. The limit of detection is 0.02 g/ml for the selected drugs.     

三线性直接分解法分析高维灰色体系

对于由多个两维测量数据组成的三维阵，本文提出一种新三线性直接分解方法。采用高维ＰＣＡ分解，从三维阵中直接提取抽象光谱和抽象浓度，再结合ＱＺ算法，唯一地确定混合物中各组分光谱的浓度。该方法可以排除其它未知组分的干扰，适用于高维灰色体系定性定量分析和多点校准。用模拟数据讨论了光谱分离度对该方法的影响，应用于混合维生素Ｂ１、Ｂ２和Ｂ６的荧光分析，求得的光谱和浓度与实验值吻合很好。     

流动注入吸附溶出—催化极谱氢波分析痕量铂

本文叙述一种流动注入吸附溶出一催化极谱测定痕量铂的新技术,它集中了溶出法、催化波和流动注入的优点,达到非常高的灵敏度和分析速度。实验给出了最佳载液组成、流速、注入体积、吸附富集电位和吸附时间等因素。本方法成功地进行了多种铂络合物、矿样和生物样品分析。     

LC Packing Materials for Pharmaceutical and Biomedical Analysis

 The author has prepared novel liquid chromatography (LC) packing materials for pharmaceutical and biomedical analysis. Those include LC packing materials for direct serum injection assays of drugs and their metabolites, LC packing materials for resolution of enantiomeric drugs, and uniformly sized molecularly imprinted polymers for drugs and their metabolites.     

壁喷电池在流动注射阳极溶出伏安法中的应用

在流动注射阳极溶出伏安法中应用壁喷电池,探讨了非稳定态电积过程的溶出峰电流理论方程,预言了峰电流正比于R~(3/4)(R为工作电极半径),并对有关参数进行了实验验证。对5×10~(-7)mol/L Cd(Ⅱ)连续测定40次,表明相对标准偏差为0.94％。     

毛细管电泳中样品在线预富集方法

本文对高效毛细管电泳中样品在线预富集方法作了评述，包括瞬间等速电泳，反流速电泳，场放大进样，场放大排除基体和固相萃取等技术，引用文献81篇。     

Synthesis and characterization of new thermally stable copoly(ester–amide)s from diester–dicarboxylic acids

Three new aromatic diester–dicarboxylic acids containing furan rings, namely, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-4,4^′-dicarboxylic acid, benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-phenyl ester-3,3^′-dicarboxylic acid and benzofuro[2,3-b]benzofuran-2,9-dicarboxyl-bis-naphthyl ester-2,2^′-dicarboxylic acid were synthesized by the reaction of benzofuro[2,3-b]benzofuran-2,9-dicarbonyl chloride with 4-hydroxybenzoic acid, 3-hydroxybenzoic acid and 3-hydroxy-naphthalene-2-carboxylic acid, respectively. Diester–dicarboxylic acids were characterized by FT-IR and NMR spectroscopy and elemental analyses. Then, these monomers were converted to aromatic copoly(ester–amide)s by their reaction with various aromatic diamines via the direct polycondensation. These polymers were characterized by viscosity measurements, solubility tests, FT-IR, Ultraviolet and ¹H-NMR spectroscopy and thermogravimetry. The polymers with inherent viscosities in the range of 0.16–0.37 dl/g in dimethyl sulfoxide at 30 °C were obtained in high yield. Most of them dissolved readily at room temperature in polar solvents. The synthesized copoly(ester–amide)s possessed glass-transition temperatures from 210–255 °C. The copoly(ester–amide)s exhibited excellent thermal stabilities and had 10% weight loss at temperature above 295 °C under nitrogen atmosphere.     

The convergence properties of direct methods of energy minimization with respect to linear coefficients in the LCAO-MO-SCF approach

It is shown that in the LCAO-MO-SCF problem, if the molecular orbital orthonormality constraints are introduced in the manner first suggested by Fletcher, then the Hessian of the problem is singular. It is suggested that this singularity may well account for the slow convergence observed using direct energy minimization methods to solve the SCF problem. Ways of avoiding the consequences of this singularity are discussed.     

Validation of the thermodynamic model of inorganic arsenic in non polluted river waters of the Basque country (Spain)

The thermodynamic model of inorganic arsenic was validated by comparing the predicted As(III) concentration with the experimentally determined one in several river waters samples of the Basque Country (Spain) collected in two sampling campaigns: spring and autumn 2000. This model takes into account the acid-base equilibria of As(III) and As(V) together with the redox equilibria between the H₃AsO₃ and H₃AsO₄ species. A correct prediction of As(III) concentration requires the knowledge of the total concentration of arsenic, pH, redox potential (referred to hydrogen electrode), and ionic strength values of the solution. The estimation of the activity coefficients of the arsenic species was performed by means of the Modified Bromley’s Methodology (MBM).In order to perform the experimental As(III) determination, an analytical method was implemented by using an ion exchange separation of As(III)/As(V) on a continuous FIA-IE-HG-AAS system. The total arsenic concentration was determined together with total concentration of the main alkaline or alkaline-earth metals and anions in the natural waters. Temperature compensated measurements of the pH and redox potentials were made in-situ at the sampling sites.For both seasonal campaigns, the agreement between predicted and experimental As(III) is really high for those samples belonging to non polluted river waters.