Flow-injection determination of 3-hdroxybutyrate in serum with an immobilized 3-hydroxybutyrate dehydrogenase reactor and chemiluminescence detection

A flow-injection system for the determination of 3-hydroxybutyrate in serum is described. 3-Hydroxybutyrate dehydrogenase is immobilized on poly(vinyl alcohol) beads and incorporated in a flow-injection system. 1-Methoxy-5-methylphenazinium methylsulphate reacts with enzymatically generated NADH to give H₂O₂, which is detected chemiluminometrically with the reaction of luminol and hexacynoferrate(III). Serum is diluted and filtered through an ultrafiltration membrane. The system responds linearly to injected samples (80 μl) in the concentration range 0.5–300 μM; the detection limit is 0.1 μM. The within-day relative standard deviation (n = 90) for 58 μM 3-hydroxybutyrate in serum is 0.8%. The maximum throughout is 20 samples per hour. The immobilized enzyme is stable for at least 1 month.     

Surface morphologies of anthracene single crystals grown from vapor phase

The morphologies and lattice structures of anthracene single crystals grown from the vapor phase were investigated using optical microscopy, phase contrast microscopy, atomic force microscopy (AFM), and X-ray diffraction analysis. Common morphologies with hexagonal large planes were observed irrespective of crystal size. The observation of certain surface morphologies with a phase contrast microscopy revealed that the spiral steps originated from screw dislocations present on the (0 0 1) planes. Moreover, the center and edge of the (0 0 1) planes had large curvatures, similar to hills. Resultantly, quarter-monolayer (ML) steps were observed on the large and flat planes between both hills.     

低进汽压力下超音速两相流升压特性实验研究

本文采用实验方法研究了进汽压力为0.2 MPa以下时,由蒸汽喷嘴、混合腔及相应的阀门和管道组成超音速汽液两相流升压加热装置的运行特性。实验表明在进汽压力为0.1 MPa-0.2 MPa时,超音速汽液两相流升压加热装置都可稳定可靠地运行,且升压效果明显,可满足电力、供暖、轻工等许多行业蒸汽加热的要求。     

Analysis of (π K<Superscript>+</Superscript>) and (K<Superscript>-</Superscript>, K<Superscript>+</Superscript>) hypernuclear production spectra in distorted-wave impulse approximation

We study the hyperon-nucleus potential with distorted-wave impulse wave approximation (DWIA) using the Green's function method. In order to include the nucleon and hyperon potential effects in Fermi averaging, we introduce the local optimal momentum approximation of target nucleons. We can describe the quasi-free Λ , Σ and Ξ production spectra in a better way than in the standard Fermi-averaged t -matrix treatments.     

流动注射-ICP光谱分析中的基体效应和酸效应研究

本文讨论了流动注射-ICP光谱分析中的基体效应和酸效应。当基体(Na、Ca、Fe、Zn)的浓度大于5mg/ml时,待测元素的谱线强度表现出不同程度的降低;上述基体的引入对激发温度和电子密度的影响不明显;基体产生的抑制效应可能与改变了待测元素粒子的激发几率的因素有关;于载流体中加入一定量的基体元素,是消除或降低基体效应的有效方法。酸(HCl、HNO_3、H_2SO_4)对待测元素表现出不同程度的抑制效应,其主要原因是物理干扰所致。     

Modeling of RF plasma torch with a metallic tube inserted for reactant injection

Flow, temperature, and electromagnetic (EM) fields in a radio-frequency thermal plasma torch designed for the preparation of superconducting powders or films have been analysed by using a new two-dimensional modeling approach with the electric field intensity as the fundamental EM field variable. The insertion of a stainless steel injection tube into the torch leads to large induction currents in this tube. Although such large induction currents cause pronounced changes of the EM fields near the injection tube, flow and temperature fields are little affected. There exists only one large toroidal vortex in the upper part of the present torch, while the maximum temperature appears at an off-axis location within the coil region.     

Direct mass measurements of neutron-deficient 152Sm projectile fragments at the FRS-ESR facility

The FRS-ESR facility at GSI provides one of the most efficient methods for direct mass measurements. In the present experiment, exotic nuclei were produced via fragmentation of ¹⁵²Sm projectiles in a thick beryllium target at 500-600 MeV/u, separated in-flight with the fragment separator FRS, and injected into the storage-cooler ring ESR. Time-resolved Schottky Mass Spectrometry was applied for mass measurements of stored and electron-cooled bare and few-electron ions. 373 different nuclides were identified by means of the spectra of their revolution frequencies. Masses for 18 nuclides (⁸⁴Zr, ⁹²Ru, ⁹⁴Rh, ^107,108,110Sb, ^111,112,114I, ¹¹⁸Ba, ^122,123La, ¹²⁴Ce, ¹²⁷Pr, ¹²⁹Nd, ¹³²Pm, ¹³⁴Sm, ¹³⁷Eu) have been determined for the first time. Masses for ^111,112I and ¹¹³Xe have been obtained via known α-decay energies. The experiment and first results will be presented.     

Nonlinear modelling and control of a common rail injection system for diesel engines

Modern trends in designing mechatronic systems call for a synergic design of the separated subsystems (mechanic, electronic parts, control modules, etc.) concurring to the overall performance. Following this point of view, this paper presents a control oriented model and a nonlinear control design for a Common Rail injection system. First a model is developed, which is tuned in a virtual simulation environment, representing the injection system in details in a reliable replication of reality. Then a sliding mode control is developed. Both the model of the injection process and of the control law are validated by a virtual detailed simulation environment. The prediction capability of the model and the control efficiency are clearly shown.     

电控发动机喷油脉宽的分析

本文介绍了利用喷油脉宽大小的变化来分析电控发动机电控系统、燃油供给等系统故障的一种方法,在汽车故障检测与诊断中有着广泛的应用。     

ON DIRECT METHOD OF SOLUTION FOR A CLASS OF SINGULAR INTEGRAL EQUATIONS

In this article, by introducing characteristic singular integral operator and associate singular integral equations (SIEs), the authors discuss the direct method of solution for a class of singular integral equations with certain analytic inputs. They obtain both the conditions of solvability and the solutions in closed form. It is noteworthy that the method is different from the classical one that is due to Lu.