直接酯化法合成PET反应条件对树脂结晶速率的影响

用直接酯化法合成了聚对苯二甲酸乙二酯（ＰＥＴ）。对缩聚反应温度、真空度及稳定剂等合条件对产物结晶速率的影响进行了研究。以ΔＴｃ＝Ｔｃ－Ｔｇ和ΔＴｃｏ＝Ｔｃｏ－Ｔｇ表征样品的结晶速率。结果表明，真空度一定，反应温度高则样品结晶速率慢；温度一定，真空度高样品结晶速率也慢。这两个因素的影响均是不可忽视的。     

Trace analysis of volatile polar organics by direct aqueous injection gas chromatography

Summary Procedures for the quantitative analysis of industrial effluents which involve concentration by solvent extraction or the purge-and-trap method are time-consuming, labor-intensive, and prone to error. Direct aqueous injection gas chromatography using an electron-capture detector for the analysis of volatile halocarbons at the ppb level is in routine use in many laboratories. We now discuss the development of a similar protocol for the analysis of volatile polar organics such as acetone, methyl ethyl ketone, methyl isobutyl ketone, and tretrahydrofuran using a flame-ionization detector.     

Morphology and transport properties of protons and methanol through partially sulfonated block copolymers

The morphological changes with different compositions of casting solvents in the membranes of sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SEBS) were investigated with small-angle X-ray scattering (SAXS) and transmission electron microscope (TEM). Using the single solvent of tetrahydrofuran (THF) and the solvent mixtures of methanol/THF with different compositions, the casting polymer solutions were prepared for the membrane fabrication. The proton conductivity and the methanol permeability of membranes were measured, and the effect of morphological changes on the casting solvents was discussed through Flory–Huggins theory. It was found that the sulfonated SEBS membranes were transformed from well ordered lamellar to disordered co-continuous structure and the morphological difference caused abrupt enhancement in the proton conductivity and the methanol permeability as the concentration of methanol in the mixed solvents (MeOH/THF) increased.     

A density-functional calculation of dynamic dipole polarizabilities of noble gas atoms

Using a very simple trial function and unperturbed electron densities calculated by a new procedure, the frequency-dependent dipole polarizability () of Ne, Ar, Kr and Xe has been calculated in the range 0 0.45 a.u., by a Karplus-Kolker-type variation-perturbation method. Results progressively worsen for larger systems so that, for Xe, (0) is only 75% of the experimental value. Probable reasons for this are discussed.     

Reagentless Glucose Biosensor Based on the Direct Electrochemistry of Glucose Oxidase on Carbon Nanotube‐Modified Electrodes

The direct electrochemistry of glucose oxidase (GOD) was revealed at a carbon nanotube (CNT)‐modified glassy carbon electrode, where the enzyme was immobilized with a chitosan film containing gold nanoparticles. The immobilized GOD displays a pair of redox peaks in pH 7.4 phosphate buffer solutions (PBS) with the formal potential of about ?455 mV (vs. Ag/AgCl) and shows a surface‐controlled electrode process. Bioactivity remains good, along with effective catalysis of the reduction of oxygen. In the presence of dissolved oxygen, the reduction peak current decreased gradually with the addition of glucose, which could be used for reagentless detection of glucose with a linear range from 0.04 to 1.0 mM. The proposed glucose biosensor exhibited high sensitivity, good stability and reproducibility, and was also insensitive to common interferences such as ascorbic and uric acid. The excellent performance of the reagentless biosensor is attributed to the effective enhancement of electron transfer between enzyme and electrode surface by CNTs, and the biocompatible environment that the chitosan film containing gold nanoparticles provides for immobilized GOD.     

Xanthine Sensors Based on Anodic and Cathodic Detection of Enzymatically Generated Hydrogen Peroxide

A xanthine biosensor was fabricated by the covalent immobilization of xanthine oxidase (XO) onto a functionalized conducting polymer (Poly‐5, 2′: 5′, 2″‐terthiophine‐3‐carboxylic acid), poly‐TTCA through the formation of amide bond between carboxylic acid groups of poly‐TTCA and amine groups of enzyme. The immobilization of XO onto the conducting polymer (XO/poly‐TTCA) was characterized using cyclic voltammetry, quartz crystal microbalance (QCM), and X‐ray photoelectron spectroscopy (XPS) techniques. The direct electron transfer of the immobilized XO at poly‐TTCA was found to be quasireversible and the electron transfer rate constant was determined to be 0.73 s^?1. The biosensor efficiently detected xanthine through oxidation at +0.35 V and reduction at ?0.25 V (versus Ag/AgCl) of enzymatically generated hydrogen peroxide. Various experimental parameters, such as pH, temperature, and applied potential were optimized. The linear dynamic ranges of anodic and cathodic detections of xanthine were between 5.0×10^?6?1.0×10^?4 M and 5.0×10^?7 to 1.0×10^?4 M, respectively. The detection limits were determined to be of 1.0×10^?6 M and 9.0×10^?8 M with anodic and cathodic processes, respectively. The applicability of the biosensor was tested by detecting xanthine in blood serum and urine real samples.     

Direct Electrochemistry of Multi‐Copper Oxidases at Carbon Nanotubes Noncovalently Functionalized with Cellulose Derivatives

This study describes the direct electron transfer of multi‐copper oxidases, i.e., laccase (from Trametes versicolor) and bilirubin oxidase (BOD, from Myrothecium verrucaria) at multiwalled carbon nanotubes (MWNTs) noncovalently functionalized with biopolymers of cellulose derivatives, i.e., hydroxyethyl cellulose (HEC), methyl cellulose (MC), and carboxymethyl cellulose (CMC). The functionalization of the MWNTs with the cellulose derivatives is found to substantially solubilize the MWNTs into aqueous media and to avoid their aggregation on electrode surface. Under anaerobic conditions, the redox properties of laccase and BOD are difficult to be defined with cyclic voltammetry at either laccase/MWNT‐modified or BOD/MWNT‐modified electrodes. The direct electron transfer properties of laccase and BOD are thus studied in terms of the bioelectrocatalytic activities of the laccase/MWNT‐modified and BOD/MWNT‐modified electrodes toward the reduction of oxygen and found to be facilitated at the functionalized MWNTs. The possible application of the laccase‐catalyzed O₂ reduction at the laccase/MWNT‐modified electrode is illustrated by constructing a CNT‐based ascorbate/O₂ biofuel cell with the MWNT‐modified electrode as the anode for the oxidation of ascorbate biofuel.     

Cl+C2H6→HCl+C2H5反应的准经典轨线研究

用三原子模型的准经典轨线方法研究了Ｃｌ与Ｃ２Ｈ６（ｖ＝０，ｊ）的反应。计算结果表明，反应产物ＨＣｌ的角度分布基本上为各向同性，其振动分布处于基态，与实验结果相一致。对反应轨线的研究表明，该反应为一直接反应，而且反应碰撞在低及高的碰撞参数下的机理不一样，在低碰撞参数下反应碰撞是直接完成的，产物ＨＣｌ以向后散射为主，转动基本上是冷的，但比高碰撞参数下的热。在高的碰撞参数下则生成短寿命的碰撞复合物，产物     

On the use of local basis sets for localized molecular orbitals

Two procedures are discussed for the direct variational optimization of localized molecular orbitals which are expanded in local subsets of the molecular basis set. It is shown that a Newton-Raphson approach is more efficient than an iterative diagonalization scheme. The effect of the basis-set truncation on the quality ofab-initio SCF results is investigated for Be, Li₂, HF, H₂O, NH₃, CH₄ and C₂H₆.     

A selective reductive amination of aldehydes by the use of Hantzsch dihydropyridines as reductant

Direct reductive amination of an aldehyde was carried out using a Hantzsch dihydropyridine as the reductant in the presence of a catalytic amount of scandium triflate. The reaction was highly selective towards aldehydes over ketones, and other reducible functional groups did not affect the reaction.