毛细管色谱直接进样法测定白酒中高碳脂肪酸乙酯的研究

介绍了采用ＦＦＡＰ键合毛细管柱直接进样测定白酒中５种高碳脂肪酸乙酯的方法，操作简捷，定量准确，检测限低达０４ｍｇ／Ｌ。用该法测定了各种香型近９０个白酒样品。改变色谱条件后，在一次直接进样分析中除能测定高碳脂肪酸乙酯外，而且还能对白酒中醇、酯、醛、酮以及有机酸等５２种香味组分进行定量测定，结果重现性良好。     

Fluorinated poly(arylene ether ketone)s bearing pentafluorostyrene moieties prepared by a modified polycondensation

The polycondensation of decafluorobenzophenone with hexafluorobisphenol A was modified by the addition of a molecular sieve dehydrating apparatus to the refluxing reaction system. This modification promoted the polymerization and enabled the reactions to be conducted in milder conditions and completed in a shorter time, thereby depressing side reactions such as branching and crosslinking. The resulting fluorinated poly(arylene ether ketone)s (FPAEK) were free of gel particles and possessed the designed molecular weights. This modified procedure was also suitable for introducing crosslinkable pentafluorostyrene (FSt) moieties into the polymers at the chain ends and/or inside the chain with the vinyl group of FSt being pendant. The resulting FSt containing fluorinated poly(arylene ether ketone)s (FPAEK‐FSt) can then be thermally crosslinked at 100 °C in the presence of 1% benzoyl peroxide (BPO) or at 250 °C without any initiator. The glass‐transition temperatures (T_g's) of FPAEK increased with increasing molecular weight and leveled off at about 147 °C for the polymer with a number‐average molecular weight of 18,600 Da, whereas the values were not apparently affected by the addition of FSt units. However, crosslinking of the FPAEK‐FSt resulted in an approximate 30 °C increase of the T_g. Spin‐coating FPAEK‐FSt onto silicon wafers followed by crosslinking gave films with excellent thermal stability, physical strength, and adhesion to the substrate as well as good reproducibility in terms of film preparation and optical properties. The refractive index and birefringence of the films measured at a wavelength of 1.55 μm were 1.502 and 2.5 × 10^?3, respectively. © 2002 Government of Canada. Exclusive worldwide publication rights in the article have been transferred to Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4205–4216, 2002     

Synthesis and characterization of some carbazole-based imine polymers

Five imine polymers, all containing 3,6-disubstituted carbazole ring in the main polymer chain, were synthesized by solution polycondensation of 3,6-diformyl (N-hexyl) carbazole with hydrazine, 1,4-diaminobenzene, 4,4′-diaminobiphenyl, 1,5-diaminonaphthalene and 3,6-(N-hexyl) diaminocarbazole. The polymers were analyzed by spectroscopic methods and compared with two imine models.     

Aromatic poly(sulfone sulfide amide imide)s as new types of soluble thermally stable polymers

A new diamine monomer containing flexible sulfone, sulfide, and amide units was prepared via three steps. Nucleophilic chloro displacement reaction of 4‐aminothiophenol with 4‐nitrobenzoyl chloride in the presence of propylene oxide afforded N‐(4‐mercapto‐phenyl)‐4‐nitrobenzamide and subsequent reduction of the nitro intermediate led to 4‐amino‐N‐(4‐mercapto‐phenyl)benzamide. Two moles of this amino thiophenol compound was reacted with bis‐(4‐chloro phenyl)sulfone to provide a novel diamine monomer. The diamine was reacted with aromatic dianhydrides to form polyimides via a two‐step polycondensation method, formation of poly(amic acid)s, followed by chemical imidization. The resulting polymers were characterized and their physical properties including thermal behavior, thermal stability, solubility and inherent viscosity were studied. Copyright © 2007 John Wiley & Sons, Ltd.     

NdOx作为助催化剂对PtRu/C电催化氧化甲醇活性的影响

采用沉积-还原法制备了PtRu-NdOx/C催化剂, 借助TEM、EDS和XRD等测试手段对其进行了微结构和组成的表征. 结果表明, 催化剂中Pt与Ru以合金形式存在, 而Nd的氧化物则以无定形形态存在. 催化剂粒子的平均粒径在2 nm左右, 晶胞参数为0.3896 nm, Nd氧化物的加入对PtRu合金的晶体结构影响不明显. 采用循环伏安法和计时电流法, 比较了PtRu-NdOx/C催化剂和PtRu /C催化剂对甲醇氧化的电催化活性, 结果表明, 加入Nd的氧化物作为助催化剂能明显提高PtRu /C催化剂对甲醇氧化的电催化性能.     

A direct quantitative analysis method for monitoring biogenic volatile organic compounds released from leaves of Pelargonium hortorum in situ

A direct quantitative method is presented that is based upon the use of multiple headspace solid phase microextraction (HS-SPME) to monitor biogenic volatile organic compounds (BVOCs) released from a living leaf of Pelargonium hortorum in situ. Seventeen BVOCs were detected by GC-MS after a single SPME extraction using a CAR/DVB/PDMS fibre. An internal standard was employed to determine the absolute amounts of seven terpenoid compounds released from a P. hortorum leaf. The quantitative analysis was performed over two days, with extraction preformed for 20 min every 3 h. The amount of volatiles extracted varied with the time of day, with two maxima recorded at 14:00 (day 1) and 17:00 (day 2), corresponding to 236 and 277 ng of the seven terpenoids recorded, respectively. These results indicate that multiple HS-SPME in combination with an internal standard is a simple, quick, and quantitative technique for analysising BVOC emissions from a live plant sample.     

直接甲醇燃料电池阴极电催化剂的研究进展

直接甲醇燃料电池(DMFC)功率密度高，燃料甲醇价格低廉、储存和携带方便，特别适合作为电动车和小型电子设备的电源，是目前燃料电池研究领域的一个热点。本文介绍了40年来DMFC阴极电催化剂的发展历史及现状，并针对目前严重影响DMFC性能的“甲醇透过”问题，阐述了研制耐甲醇阴极电催化剂的重要性，讨论了今后DMFC阴极电催化剂的发展趋势。     

Direct electron transfer reaction of glucose oxidase at bare silver electrodes and its application in analysis

The direct electron transfer reaction of glucose oxidase (GOx) at a bare silver electrode is verified. The electron transfer number n = 2, electron transfer coefficient α = 0.45 and rate constant of the electrochemical reaction K_s = 0.1 s⁻¹ are obtained. This communication presents a multimolecular adsorption model to explain the properties of the direct electron reaction between GOx and bare silver electrodes. The residual valence force may be an important factor to ensure a direct electron transfer reaction on the bare electrode. On the basis of the experimental fact that only biologically active GOx exhibits electrochemical activity in solution, a facile analytical method for analyzing the active GOx concentration is developed. The results determined correspond very well to that of a spectrometric method.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

缩聚反应合成侧链液晶聚合物

侧链液晶聚合物的合成方法,可归纳为3类:一是烯基的单体,如甲基丙烯酸酯,或丙烯酸酯,氯代丙烯酸酯等,经自由基聚合反应,阴离子聚合反应及甲基丙烯酸酯的基团转移聚合反应,得到侧链液晶聚合物;二是变性反应,如聚硅氧烷与丙烯酸酯介