Electric field assisted oxygen removal from the basal plane of the graphitic material

We provide a novel strategy to eliminate the epoxy group from the basal plane of graphene platelets. Given that the current reduction methods are unsatisfactory to clean the epoxides or sometimes cause undesirable structure deformations, the proposed strategy restores the original hexagonal carbon network without creating other new defects. To the best of our knowledge, the electric field mediated graphene oxide (GO) reduction has not yet been systematically investigated. The capability would permit the improvement of existing GO reduction methods and assist in the fabrication of high‐quality graphitic materials. © 2012 Wiley Periodicals, Inc.     

Cellular Fucosylation Inhibitors Based on Fluorinated Fucose-1-phosphates**

Fucosylation of glycans impacts a myriad of physiological and pathological processes. Inhibition of fucose expression emerges as a potential therapeutic avenue for example in cancer, inflammation, and infection. In this study, we found that protected 2-fluorofucose 1-phosphate efficiently inhibits cellular fucosylation with a four to seven times higher potency than known inhibitor 2FF, independently of the anomeric stereochemistry. Nucleotide sugar analysis revealed that both the α- and β-GDP-2FF anomers are formed inside the cell. In conclusion, we developed A2FF1P and B2FF1P as potent new tools for studying the role of fucosylation in health and disease and they are potential therapeutic candidates.     

An arsenate with the α‐CrPO4 structure type,NaCa1–xNi3–2xAl2x(AsO4)3 (x = 0.23): crystal structure,charge‐distribution and bond‐valence‐sum analyses

Since the discovery of electrochemically active LiFePO₄, materials with tunnel and layered structures built up of transition metals and polyanions have become the subject of much research. A new quaternary arsenate, sodium calcium trinickel aluminium triarsenate, NaCa_1–x Ni_3–2x Al_2x (AsO₄)₃ (x = 0.23), was synthesized using the flux method in air at 1023 K and its crystal structure was determined from single‐crystal X‐ray diffraction (XRD) data. This material was also characterized by qualitative energy‐dispersive X‐ray spectroscopy (EDS) analysis and IR spectroscopy. The crystal structure belongs to the α‐CrPO₄ type with the space group Imma . The structure is described as a three‐dimensional framework built up of corner‐edge‐sharing NiO₆, (Ni,Al)O₆ and AsO₄ polyhedra, with channels running along the [100] and [010] directions, in which the sodium and calcium cations are located. The proposed structural model has been validated by bond‐valence‐sum (BVS) and charge‐distribution (CHARDI) tools. The sodium ionic conduction pathways in the anionic framework were investigated by means of the bond‐valence site energy (BVSE) model, which predicted that the studied material will probably be a very poor Na⁺ ion conductor (bond‐valence activation energy ∼7 eV).     

二丙胺的结构微调对磷酸铝分子筛晶化过程影响的凝胶组成依赖性

以二丙胺异构体（二正丙胺DPA和二异丙胺D-iPA）为结构导向剂,在200℃加热2组反应原料物质的量之比不同的初始凝胶,合成出了高结晶度的磷酸铝分子筛AlPO₄-11。利用X射线粉末衍射分析、元素分析等表征手段,研究了凝胶的晶化过程和液相的pH值以及Al和P的浓度演化。初始凝胶各组分物质的量之比为n_Al2O3：n_P2O5：n_DPA/D-iPA：n_H2O2=1.0：1.0：1.2：75时,以DPA为结构导向剂,晶化过程中无中间相生成,而以D-iPA为结构导向剂时,晶化过程中生成了具有12元环孔道结构的磷酸铝分子筛AlPO₄-5中间相;初始凝胶各组分物质的量之比为n_Al2O3：n_P2O5：n_DPA/D-iPA：n_H2O2=1.0：1.0：1.0：75时,以DPA为结构导向剂,晶化过程中生成了具有18元环孔道结构的磷酸铝分子筛VPI-5中间相,而以D-iPA为结构导向剂时,晶化过程中同时出现了VPI-5及AlPO₄-5两种中间相。表明对于同一种有机胺,凝胶物质的量之比的改变影响了其结构导向效应。理论计算结果显示质子化的DPA及D-iPA中N原子上的电荷有差异,表明有机胺的结构微调影响其结构导向效应,但该影响依赖于凝胶组成。     

Direct Blue 71 staining as a destaining‐free alternative loading control method for Western blotting

In Western blotting, a suitable loading control is indispensable for correcting errors in the total amount of loaded protein. Immunodetection of housekeeping proteins and total protein staining have traditionally been used as loading control methods. Direct Blue 71 (DB71) staining—a novel, sensitive, dye‐binding staining method compatible with immunodetection—may offer advantages over these traditional loading control methods. Three common neuroscientific samples (human plasma, human oligodendrocytes, and rat brain) were employed to assess DB71 staining as a loading control method for Western blotting. DB71, CBB, one traditional housekeeping protein, and one protein of interest were comparatively assessed for reliability and repeatability and linear dynamic range over 2.5–40 μg of protein loaded. DB71's effect on the reliability and repeatability and linear dynamic range of immunoreaction were also assessed. Across all three sample types, DB71 was either equivalent or superior to CBB and housekeeping protein‐based methods in terms of reliability and repeatability and linear dynamic range. Across all three sample types, DB71 staining did not impair the reliability and repeatability or linear dynamic range of immunoreaction. Our results demonstrate that the DB71 staining can be used as a destaining‐free alternative loading control method for Western blotting.     

水分子对α相CL-20热分解机理影响的分子动力学研究

研究六硝基六氮杂异伍兹烷(CL-20)晶体不同晶型在不同温度下的反应机理, 对于深入认识含能材料在极端条件下的冲击起爆、冲击点火和爆轰过程等具有重要意义. 基于反应力场, 研究水分子在纯α相CL-20及其水合物的晶体结构中数量随时间的变换, 分析水分子对两种体系的初始分解和第二阶段的分解路径的影响. 计算结果表明: CL-20 分子的初始分解路径与水分子无关, 第二阶段的分解反应与水分子有关. 在低温(T<1500 K)下, 水分子对两种体系没有影响, 二者的初始分解路径均为N-NO₂键生成NO₂自由基; 在1500 K≤T≤2500 K时, 水分子作为反应物或与NO₂、、OH自由基等组成催化体系, 生成O₂、H₂O₂等产物, 加速水合物体系在高温下的第二阶段反应, 使得高温下水合物体系的化学反应速率和反应生成的NO₂自由基的数量比纯CL-20体系的化学反应速率和反应生成的NO₂自由基的数量大; 在T>2500 K时, 水分子的催化反应抑制CL-20初始分解反应, 使得在3000 K时纯CL-20体系的反应速率大于水合物体系中CL-20的反应速率.     

Metric inequalities for routings on direct connections with application to line planning

We consider multi-commodity flow problems in which capacities are installed on paths. In this setting, it is often important to distinguish between flows on direct connection routes, using single paths, and flows that include path switching. We derive a feasibility condition for path capacities supporting such direct connection flows similar to the well-known feasibility condition for arc capacities in ordinary multi-commodity flows. The condition can be expressed in terms of a class of metric inequalities for routings on direct connections. We illustrate the concept on the example of the line planning problem in public transport and present an application to large-scale real-world problems.     

Amarusine A,a new dioxaspiro[4.4]nonane derivative with a butyrolactone ring from Pleioblastus amarus

Amarusine A (1), a new polyketide derivative possessing an unusual dioxaspiro[4.4]nonane derivative with a butyrolactone ring, was isolated from the leaves of Pleioblastus amarus. The structure and absolute stereochemistry of compound 1 were rigorously determined using UV, IR, HRESIMS, and 1D and 2D NMR techniques and by comparing experimental and calculated electronic circular dichroism (ECD) spectra. Amarusine A (1) exhibits a good antioxidant activity for scavenging the DPPH radical. A possible biosynthetic pathway was postulated.     

4-Ketozeinoxanthin,a novel carotenoid produced in Escherichia coli through metabolic engineering using carotenogenic genes of bacterium and liverwort

In order to produce a novel keto-carotenoid in Escherichia coli, we introduced the marine bacterial carotenoid ketolase gene (crtW) into pathway-engineered E. coli producing carotenoids of plant origin, which carried the lycopene biosynthesis genes (crtE, crtB, and crtI) from soil bacterium Pantoea ananatis and the liverwort Marchantia polymorpha genes that encode lycopene β-cyclase (MpLCYb), lycopene ε-cyclase (MpLCYe), and β-carotenoid hydroxylase (MpBHY). A novel keto-carotenoid (1) was produced by these carotenoid biosynthesis genes in E. coli along with α-echinenone, adonirubin, and adonixanthin. The structure of 1 was determined as (3S,6′R)-3-hydroxy-β,ε-caroten-4-one based on Uv–vis, MS, ¹H NMR, and CD spectral data. This compound was named 4-ketozeinoxanthin and showed anti-tumor-promoting activity.     

Ultra‐trace level determination of diquat and paraquat residues in surface and drinking water using ion‐pair liquid chromatography with tandem mass spectrometry: A comparison of direct injection and solid‐phase extraction methods

Direct injection and solid‐phase extraction methods for the determination of diquat and paraquat in surface and drinking water were developed using liquid chromatography with tandem mass spectrometry. The signal intensities of analytes based on six ion‐pairing reagents were compared with each other, and 12.5 mM nonafluoropentanoic acid was selected as the best suited amongst them. A clean‐up method was developed using Oasis hydrophilic–lipophilic balance; this was compared to the direct injection method, with respect to limits of detection, interference, precision, and accuracy. Limits of quantification of diquat and paraquat were 0.03 and 0.01 μg/L using the direct injection method, and 0.002 and 0.001 μg/L using the hydrophilic–lipophilic balance method. When the hydrophilic–lipophilic balance method was used to analyze target compounds in 114 surface water and 30 drinking water samples, paraquat and diquat were detected within a concentration range of 0.001–0.12 and 0.002–0.038 μg/L in surface water, respectively. When the direct injection method was used to analyze target compounds in the same samples, the detected concentrations of paraquat and diquat were within 25% in samples being >0.015 μg/L using the hydrophilic–lipophilic balance method. The liquid chromatography with tandem mass spectrometry method using direct injection can thus be used for routine monitoring of paraquat and diquat in surface and drinking water.