A selective reductive amination of aldehydes by the use of Hantzsch dihydropyridines as reductant

Direct reductive amination of an aldehyde was carried out using a Hantzsch dihydropyridine as the reductant in the presence of a catalytic amount of scandium triflate. The reaction was highly selective towards aldehydes over ketones, and other reducible functional groups did not affect the reaction.     

Pathways of the reactions of nucleophilic addition of H2O and HF molecules to formaldehyde in the gas phase and in the complex with formic acid:ab initio calculations

The gradient pathways of the reactions of nucleophilic addition of H₂O and HF molecules to formaldehyde in the gas phase and in the XH…H₂CO…HC(O)OH complex (X=OH, F) were calculated by theab initio RHF/6-31G^**, MP2(fc)/6-31G^**, and MP2(full)/6-311++G^** methods. Both reactions proceed concertedly. The formation of H-bonded bimolecular pre-reaction complexes is the initial stage of the gas-phase reactions; at the same time, no indications of the formation of stable π-complexes were found on the potential energy surfaces of systems under study. The calculated energy barriers to the gasphase reactions exceed 40 kcal mol⁻¹, while those to reactions in the complex XH…H₂CO…HC(O)OH (X=OH, F) become more than halved. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2146–2154, November, 1998.     

磺化酚酞型聚醚砜膜的制备及其阻醇和质子导电性能

直接甲醇燃料电池 (Directmethanolfuelcell,DMFC)以高效、清洁和燃料储运方便等优点适宜于作为各种用途的可移动动力源 ,成为 2 0世纪 90年代以来研究与开发的热点[1,2 ] .目前 ,这种电池的研究难点主要集中在催化剂不稳定和质子交换膜透醇上 .一张好的DMFC膜不但要可传递质子、绝缘电子 ,还应具有良好的阻醇性能 .如果膜的阻醇性能不好 ,甲醇会穿过膜到达阴极 ,与氧直接反应而不产生电流 ,不但造成燃料的浪费 ,同时也影响阴极的正常反应 ,使电池效率下降[3 ] .目前广泛应用于燃料电池中的Nafion 系列膜是由美国DuPont公司生产的一种…     

A DFT and direct MO dynamics study on the structures and electronic states of phenyl-capped terthiophene

The structures and electronic states of phenyl-capped terthiophene (denoted by P3T) and the ionic species of P3T have been investigated by means of density functional theory (DFT) and direct MO dynamics calculations. P3T is one of the high-performance molecular devices, which has been utilized as a semi-conductor. The calculations indicated that the neutral P3T has a non-planar structure whose the phenyl rings in both ends of thiophene chain are largely deviated from the molecular plane. The cation and anion radicals, dication and dianion were considered as its ionic states. The structure for cation radical of P3T is close to more planar than that of neutral P3T. The structures for anion radical, dication and dianion take a pure planar structure. The first excitation energy of neutral P3T is calculated to be 2.90 eV at the TD-B3LYP/6-31G(d)//B3LYP/6-311+G(d) level, while the P3T cation and anion radicals have lower excitation energies (1.22 and 1.10 eV, respectively). The direct MO dynamics calculation showed that neutral, cation and anion hold near planar structure at 300 K. On the other hand, oligothiophene (n = 5) and its ionic species are strongly deformed from the planar structure, and thiophene rings in both ends of chain rotate rapidly by thermal activation. The mechanism of the electron conductivity in P3T was discussed on the basis of theoretical results.     

Direct determination of rare earth impurities in high purity erbium oxide dissolved in nitric acid by inductively coupled plasma mass spectrometry

A novel method was developed for the direct determination of trace quantities of rare earth elements (REEs) in high purity erbium oxide dissolved in nitric acid by inductively coupled plasma mass spectrometry (ICP-MS) in this work. The mass spectra overlap interferences arose from Er matrix on the neighbouring and monoisotopic analytes of ¹⁶⁵Ho(100) and ¹⁶⁹Tm(100) were eliminated by adjusting instrumental peak resolution value from 0.7 to 0.3 amu. The matrix suppression effect of Er on the ion peak signals of REEs impurities was effectively compensated with spiking In as internal standard element. The limit of quantitation (LOQ) of REEs impurities was from 0.0090 to 0.025 μg g⁻¹, the recoveries of spiked sample for REEs were found to be in the range of 90.3-107% through using the proposed method and relative standard deviation (R.S.D.) varied between 2.5% and 6.7%. The novel methodology had been found to be suitable for the direct determination of trace REEs impurities in 99.999-99.9999% high purity Er₂O₃ and the results obtained from this method keep in good agreement with that acquired from high resolution ICP-MS.     

As, Bi, Sb and Sn determination in atmospheric particulate matter by direct solid sampling-hydride generation-electrothermal atomic absorption spectrometry

A novel, rapid and simple method by hydride generation-electrothermal atomic absorption spectrometry (HG-ETAAS) after direct As, Bi, Sb and Sn hydrides generation from untreated filters of atmospheric particulate matter (PM₁₀ and PM_2.5) was optimised. PM₁₀ and PM_2.5 were not subjected to any pre-treatment: circular portions between 0.28 and 6.28 cm² were directly placed into the reaction vessel of a batch mode generation system. A 2⁸ × 3/64 Plackett–Burman design was used as a multivariate strategy for the evaluation of the effects of several variables affecting the hydride generation, trapping and atomisation efficiencies. Trapping temperature was the most statistically significant variable for As, Bi and Sn. Atomisation temperature was also statistically significant for Sb determination. Optimum values of significant variables were selected by using univariate optimisation approaches. An aqueous calibration method was used throughout. The developed method has been found to be precise with relative standard deviations of 6.2, 5.3, 9.1 and 7.5% for 11 determinations in a filter sample containing 0.7, 1.0, 1.4 and 1.7 μg l⁻¹ for As, Bi, Sb and Sn, respectively. Results obtained by direct solid sampling-HG-ETAAS have been found statistically comparable with those obtained after conventional method based on an acid digestion followed to ICP-MS. Absolute detection limits were 37, 15, 30, and 41 ng l⁻¹ for As, Bi, Sb and Sn, respectively. Detection limits referred to the air volume sampled (in the range of 0.020–0.050 ng m⁻³) were low enough for the determination of several hydride-forming elements from PM₁₀ and PM_2.5 samples collected in a non-polluted suburban area of A Coruña (NW Spain).     

CF3O2自由基和NO反应机理的理论研究

用密度泛函理论(DFT)的B3LYP方法, 分别在6-31G、6-311G、6-311+G(d)基组水平上研究了CF3O2自由基和NO反应机理. 研究结果表明, CF3O2自由基和NO反应存在三条可行的反应通道, 优化得到了相应的中间体和过渡态. 从活化能看, 通道CH3O2+NO→IM1→TS1→IM2→TS2→CF3O+ONO的活化能最低, 仅为70.86 kJ•mol-1, 是主要反应通道, 主要产物是CF3O和NO2. 而通道CH3O2+NO→IM1→TS3→CF3ONO2和CH3O2+NO→TS4→IM3→TS5→IM4→TS6→CF3O+NOO的活化能较高, 故该反应难以进行.     

Direct HPLC resolution of beta-aminoalcohol (tazifylline,ranolazine, sotalol) enantiomers

Summary A routine chiral analysis has been developed to control the optical purity of chiral drugs and to monitor their asymmetric synthesis. The recent advent of new chiral stationary phases for HPLC enabled us to achieve the direct resolution of chiral drugs without any derivatization. The factors affecting chiral resolution on a new alpha₁-acid glycoprotein column (EnantioPac, LKB) were assessed with three beta-aminoalcohols.     

Surface and bulk properties of severely fluorinated carbon fibres

The development of ultra-inert composites using fluorinated carbon fibres as the reinforcement requires fluorinated carbon fibres with a durable surface composition. Here we report the effect of direct fluorination using an F₂/N₂ mixture at 653 K on the surface and bulk properties of two types of high strength carbon fibres. These were treated up to a surface fluorine content of ∼64 at.% and a bulk fluorine content of ∼15 mass%. A colour change was observed after fluorination caused by the changes in the graphitic band structure of the carbon fibres by the introduction of carbon sp³ hybridisation. The tensile strength and Young's modulus decrease after fluorination by up to 33 and 22%, respectively. XRD shows marginal changes in the interlayer distance but the crystallite size increases. Changes in the electrical conductivity of the fluorinated carbon fibres indicate that the modification is confined to the near surface volume. Predominantly covalent C-F bonds are formed as shown by X-ray photoelectron spectroscopy (XPS) and measured zeta (ζ)-potentials. Hence the fluorinated fibres are hydrophobic and have low surface tensions. This and the large increase in fibre surface area, as determined by nitrogen adsorption, is expected to facilitate interfacial interaction between fluorinated carbon fibres and fluoropolymers.     

Large-volume PTV injection: Comparison of direct water injection and in-vial extraction for GC analysis of triazines

Summary The potential of large-volume PTV injection was studied for the analysis of triazine herbicides in water samples. Direct water injection and in-vial extraction were described and compared. Detection limits were between 0.01–0.02 μg L⁻¹ and relative standard deviations were <9%. Both methods are suitable for the analysis of triazines at ppt-level, although in-vial extraction is favourable for water samples with relatively large amounts of matrix components.