Effect of NaOH and NaCl on the disodiumn-decane phosphonate micellar aggregation number

The diffusion coefficient of disodiumn-decane phosphonate micelles was studied by polarography at 25°C in NaCl and in NaOH solutions, and the size and aggregation number of the micelles was computed as a function of Na⁺ concentration. All other conditions being equal, the addition of NaCl produces micelles with an aggregation number one order of magnitude larger than the NaOH addition. This is due to the increase of the effective charge per micellized head group produced by the reaction of OH- with the hydrolized head groups which are mainly present as-PO₃H- in the micellar Stern layer.     

Comparison of triel bonds with different chalcogen electron donors: Its dependence on triel donor and methyl substitution

The complexes between R₃Tr (Tr = B, Al, and Ga; R = H, F, Cl, and Br) and H₂X (X = O, S, and Se) were theoretically studied. The interaction energies of R₃Al⋯H₂X and R₃Ga⋯H₂X are consistent with the electronegativity of the halogen atom R (R ≠ H), but an opposite dependence is found for R₃B⋯H₂X. The triel bond of R₃Tr⋯H₂X is weaker for the heavier chalcogen donor. The dependence of triel bonding strength on the triel atom is complicated, depending on the nature of R and X. The methyl substitution of H₂X causes a substantial increase in the interaction energy from −5.74 kcal/mol to −22.88 kcal/mol, and its effect is relevant to the nature of Tr, X, and R groups. For the S and Se donors, the increased percentage of interaction energy is almost the same due to the methyl substitution, which is larger than that of the O analogue. In most triel-bonded complexes, electrostatic dominates and polarization has comparable contribution. However, polarization plays a dominant role in R₃B⋯ and R₃B⋯ (R = Cl and Br; R′ = H and Me).     

Micellar effects of surfactants in cleavage of 4-nitro-phenyl diethyl phosphonate by hydroperoxide anion

We have studied the nucleophilicity of the hydroperoxide anion relative to 4-nitrophenyl diethyl phosphonate (NPDEPS) in the presence of cetyltrimethylammonium bromide (water, 25 °C) while varying the acidity of the medium and the hydroperoxide anion concentration over a broad range. The increase in the reaction rate when the reaction is transferred to a micellar pseudophase is as high as ∼10-fold, which is explained by concentration effects. In CTAB micelles, as in water, the hydroperoxide ion is one of the most effective α-nucleophiles, and the size of the α-effect, characterized by the ratio of the second-order rate constants for reactions of HOO⁻ and OH⁻ anions with NPDEPS, remains practically constant and reaches a value of ∼50-fold. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 6, pp. 357–363, November–December, 2006.     

A PMMA composite as an optical diffuser in a liquid crystal display backlighting unit (BLU)

The effect of thermo-physical properties, relative humidity and stiffness on the warpage of a poly(methyl methacrylate) (PMMA) diffusing plate modified with glass fibers in a direct-lit backlight unit (BLU) of a liquid crystal display (LCD) was investigated. The warpage of the PMMA diffusing composites modified with a glass fiber were significantly reduced relative to that of a conventional PMMA diffusing plate. Luminance and scattering characteristics of the PMMA diffusing composites having 5, 10, 20 vol% of glass fibers were measured. Although the luminance of the composite was lowered as increasing the volume fractions of glass fibers in the PMMA composites, good brightness uniformity of the composites on a light source was obtained.     

在涂层TiO2改性铜催化剂上甲醇脱氢制甲酸甲酯

在常压和２５０℃下，考察了涂层ＴｉＯ２改性铜催化剂上甲醇脱氢生成甲酸甲酯的活性和选择性以及催化剂的稳定性。结果表明，涂层ＴｉＯ２明显提高了铜催化剂的活性和稳定性。在所考察的铜催化剂中，以Ｃｕ／ＴｉＯ２／ＡｌＯ３的催化活性最高，甚至高于离子交换法制备的Ｃｕ（ｅｘ）／ＳｉＯ２催化剂。ＸＰＳ分析表明，Ｃｕ／ＴｉＯ２／ＡｌＯ３中存在着两种化学环境不同的ＣＵ（０），即负载在ｒ－ＡＬＯ３和ＴｉＯ２－Ａｌ２Ｏ３     

LSGMC5含量对于二甲醚燃料电池复合Ni-Fe阳极性能的影响

用浸渍法制备了掺杂不同质量分数的La0.8Sr0.2Ga0.8Mg0.15Co0.05O3-δ (LSGMC5)粉末的Ni8-Fe2-LSGMC5复合阳极, 并采用交流阻抗和直流极化技术考察了以氢气和二甲醚为燃气时该复合阳极的电化学性能及相应电池的功率输出特性. 结果表明, 在电极中掺入LSGMC5 粉末, 能显著地改善电极的形貌和电极/电解质界面结构, 减小欧姆电阻和极化电阻. 电极中LSGMC5 粉末含量对于氢气及二甲醚电化学氧化性能的影响显著不同. 以二甲醚为燃气时, 电极极化电阻随LSGMC5 粉末含量的增加而减小, 其中LSGMC5 掺杂量为30%的复合阳极具有最高的电化学性能, 相应电池在1073、1023、973 K 时的输出功率分别为1.00、0.61、0.40 W·cm-2; 以氢气为燃气时, LSGMC5 掺杂量为20%的复合阳极具有最好的电化学性能, 随着LSGMC5 掺杂量的进一步增加, 电极极化电阻显著增大.     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

风毛菊化学成分研究（Ⅰ）

从风毛菊中分离得到16种化合物,经光谱方法鉴定为山奈素-3-O-(6＂-O-巴豆酰)-β-D-葡萄糖甙(1)、槲皮素-3-O-(6＂-O-巴豆酰)-β-D-葡萄糖甙(2)、丁香甙甲醚(3))、山奈素-3-O-β-D-葡萄糖甙、槲皮素-3-O-β-D-葡萄糖甙、丁香甙、α-香树脂醇棕榈酸酯、β-香树酯醇棕榈酸酯、羽扇豆醇棕榈酸酯、羽扇豆醇乙酸酯、羽扇豆醇、β-谷甾醇、棕榈酸、二十四烷酸、二十六烷酸、二十五烷烃,其中(1)、(2)和(3)为新化合物。     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.