Micellar Effects on the Oxidation of d‐Glucose by Chromic Acid in Perchloric Acidic Medium

Kinetics of the reaction between d‐glucose and Cr(VI) in the absence and presence of surfactant micelles have been studied by a spectrophotometric method in aqueous‐acidic solutions of perchloric acid. It was observed that the reaction has a nonautocatalytic followed by an autocatalytic pathway. The rate of the initial stage increases with increase in [glucose], [HClO₄] and temperature. Due to precipitation, the effect of cationic micelles of cetyltrimethylammonium bromide (CTAB) could not be studied whereas the oxidation is catalyzed by anionic micelles of sodium dodecyl sulfate (SDS) and nonionic micelles of Triton X‐100 (TX‐100). The results are discussed in terms of the pseudo‐phase kinetic model. Activation parameters are evaluated and a mechanism consistent with the results is proposed. A rate law for the reaction has also been derived. The redox reaction occurs through a Cr(VI)→Cr(IV) path.     

十二烷基硫酸钠水溶液的动态表面吸附性质

利用MPTC型气泡压力张仪研究了十二烷基硫酸钠(SDS)溶液在不同NaCl 浓度下的动态表面吸附性质, 分析了离子型表面活性剂在表面吸附层和胶束中形成双电层结构产生表面电荷对动态表面扩散过程和胶束性质的影响. 结果表明, SDS在表面吸附过程中, 表面电荷的存在会产生5.5 kJ·mol^-1的吸附势垒(E_a), 显著降低十二烷基硫酸根离子(DS^-)的有效扩散系数(D_eff). 十二烷基硫酸根离子的有效扩散系数与自扩散系数(D)的比值(D_eff/D)仅为0.013, 这表明SDS与非离子型表面活性剂不同, 在吸附初期为混合动力控制吸附机制. 加入NaCl可以降低吸附势垒. 当加入不小于80 mmol·L^-1 NaCl后, E_a小于0.3 kJ·mol^-1, D_eff/D在0.8-1.2之间, 表现出与非离子型表面活性剂相同的扩散控制吸附机制. 同时, 通过分析SDS胶束溶液的动态表面张力获得了表征胶束解体速度的常数(k₂). 发现随着NaCl 浓度的增大, k₂减小, 表明SDS胶束表面电荷的存在会增加十二烷基硫酸根离子间的排斥力, 促进胶束解体.     

Enantioselective Reduction of Prochiral Ketones with NaBH4/Me2SO4/(S)-Me-CBS

The enantioselective reduction of prochiral ketones with NaBH₄/Me₂SO₄/(S)-Me-CBS is described. Borane is generated in situ via the reaction of NaBH₄ with Me₂SO₄ in tetrahydrofuran, which is as efficient as the commercial one. Such in situ–generated borane reagent was applied to reduce prochiral ketones in the presence of chiral oxazaborolidine catalyst directly. The corresponding chiral secondary alcohols were obtained with excellent enantiomeric excesses (93–99% ee) and good to excellent yield (80–99%).     

A rapid way to synthesize Brønsted acidic ionic liquid and its application as an efficient catalyst for esterification

A novel and time-saving method to prepare a Brønsted acidic ionic liquid, 1-carboxymethyl-3-methylimidazolium hydrogen sulfate ([CMI][HSO₄]), in high yield and purity was performed under microwave irradiation. The ionic liquid showed an incomparable catalytic efficiency in the microwave-accelerated esterification of arenecarboxylic acids. Moreover, its ability of being recovered and reused many times without loss of activity has made [CMI][HSO₄] more favorable from the viewpoint of green chemistry.     

In situ single‐crystal to single‐crystal (SCSC) transformation of the one‐dimensional polymer catena‐poly[[diaqua(sulfato)copper(II)]‐μ2‐glycine] into the two‐dimensional polymer poly[μ2‐glycine‐μ4‐sulfato‐copper(II)]

The one‐dimensional coordination polymer catena‐poly[diaqua(sulfato‐κO)copper(II)]‐μ₂‐glycine‐κ²O:O′], [Cu(SO₄)(C₂H₅NO₂)(H₂O)₂]_n, (I), was synthesized by slow evaporation under vacuum of a saturated aqueous equimolar mixture of copper(II) sulfate and glycine. On heating the same blue crystal of this complex to 435 K in an oven, its aspect changed to a very pale blue and crystal structure analysis indicated that it had transformed into the two‐dimensional coordination polymer poly[(μ₂‐glycine‐κ²O:O′)(μ₄‐sulfato‐κ⁴O:O′:O′′:O′′)copper(II)], [Cu(SO₄)(C₂H₅NO₂)]_n, (II). In (I), the Cu^II cation has a pentacoordinate square‐pyramidal coordination environment. It is coordinated by two water molecules and two O atoms of bridging glycine carboxylate groups in the basal plane, and by a sulfate O atom in the apical position. In complex (II), the Cu^II cation has an octahedral coordination environment. It is coordinated by four sulfate O atoms, one of which bridges two Cu^II cations, and two O atoms of bridging glycine carboxylate groups. In the crystal structure of (I), the one‐dimensional polymers, extending along [001], are linked via N—H...O, O—H...O and bifurcated N—H...O,O hydrogen bonds, forming a three‐dimensional framework. In the crystal structure of (II), the two‐dimensional networks are linked via bifurcated N—H...O,O hydrogen bonds involving the sulfate O atoms, forming a three‐dimensional framework. In the crystal structures of both compounds, there are C—H...O hydrogen bonds present, which reinforce the three‐dimensional frameworks.     

Raman spectroscopic characterization of urine of normal and oral cancer subjects

Urine is considered as one of the diagnostically important bio fluids, as it has many metabolites. The distribution and the physiochemical properties of the metabolites may vary during any altered metabolic and pathological conditions. Raman spectroscopy was employed in the characterization of the metabolites of human urine of normal subjects and oral cancer patients in the finger print region (500–1800 cm⁻¹). Principal component analysis‐based linear discriminant analysis was performed to discriminate cancer patients from normal subjects. The discriminant analysis classifies the cancer patients from normal subjects with a sensitivity and specificity of 98.6% and 87.1%, respectively, with an overall accuracy of 93.7%. Copyright © 2014 John Wiley & Sons, Ltd.     

Elucidating the Binding Mode between Heparin and Inflammatory Cytokines by Molecular Modeling

Heparan sulfate (HS) interacts with a broad spectrum of inflammatory cytokines, thereby modulating their biological activities. It is believed that there is a structural-functional correlation between each protein and sugar sequences in the HS polysaccharides, however, the information in this regard is limited. In this study, we compared the binding of four inflammatory cytokines (CCL8, IL-1beta, IL-2 and IL-6) to immobilized heparin by an SPR analysis. To define the molecular base of the binding, we used a heparin pentasaccharide as representative structure to dock into the 3D-molecular structure of the cytokines. The results show a discrepancy in K_D values obtained by SPR analysis and theoretical calculation, pointing to the importance to apply more than one method when describing affinity between proteins and HS. By cluster analysis of the complex formed between the pentasaccharide and cytokines, we have identified several groups in heparin forming strong hydrogen bonds with all four cytokines, which is a significant finding. This molecular and conformational information should be valuable for rational design of HS/heparin-mimetics to interfere cytokine-HS interactions.     

Investigation of damaged interior walls using synchrotron‐based XPS and XANES

Evidence of internal sulfate attack in field exposure was demonstrated by the damaged interior wall of a three‐year‐old house situated in Nakhon Ratchasima Province, Thailand. Partial distension of the mortar was clearly observed together with an expansion of a black substance. Removal of the black substance revealed a dense black layer. This layer was only found in the vicinity of the damaged area, suggesting that this black material is possibly involved in the wall cracking. By employing synchrotron‐based X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption near‐edge structure (XANES) techniques, the unknown sample was chemically identified. The S 2p and O 1s XPS results mutually indicated the existence of sulfate species in the materials collected from the damaged area. The XANES results indicated the presence of ferrous (II) sulfate, confirming sulfate‐induced expansion and cracking. The sulfate attack in the present case appeared to physically affect the structure whereas the chemical integrity at the molecular level of the calcium silicate hydrate phase was retained since there was a lack of spectroscopic evidence for calcium sulfate. It was speculated that internal sulfate probably originated from the contaminated aggregates used during the construction. The current findings would be beneficial for understanding the sulfate‐attack mechanism as well as for future prevention against sulfate attack during construction.     

Polymorphism in Bi2(SO4)3

A new polymorph of Bi₂(SO₄)₃ was prepared by reaction of LiBiO₂ with H₂SO₄ and its crystal structure was solved from X-ray powder diffraction. This new polymorph crystallizes in C2/c space group with lattice parameters a = 17.3383(3) Å, b = 6.77803(12) Å, c = 8.30978(13) Å, β = 101.4300(12)°. Bi₂(SO₄)₃ presents a layered structure made of SO₄ sulfate groups and signs of stereochemically active Bi³⁺ lone pairs. The new Bi₂(SO₄)₃ absorbs water to form Bi₂(H₂O)₂(SO₄)₂(OH)₂ through an intermediate Bi₂O(OH)₂SO₄ phase, and the transition is reversible when heated under vacuum.     

Cooling crystallization of aluminum sulfate in pure water modulated by sodium dodecylbenzenesulfonate

This study investigated the cooling crystallization of aluminum sulfate to explore the basic data for the recovery of aluminum resources from coal spoil. Cooling crystallization process of aluminum sulfate with sodium dodecylbenzenesulfonate (SDBS) was investigated experimentally. The effects of operating conditions, namely rotate speed and cooling rate on the crystal size (Median diameter, D_0.5) were studied. Based on single factor experimental results, the response surface method (RSM) with a Box–Behnken design (BBD) was used to determine the key operating conditions, from which a predictive equation was established to quantitatively describe the relationships of D_0.5 and there relative parameters. The optimum operating conditions for cooling crystallization of aluminum sulfate were as follows: rotate speed of 200–300 rpm, cooling rate of 4–5 °C /min and n (SDBS)/n (Al₂(SO₄)₃) of around 5E‐4. Molecular dynamics (MD) results reveal that SDBS decreases the diffusion coefficient (D) of Al³⁺ molecules, which inhibits nucleation and promotes crystal growth.