多相催化反应原位红外系统及其应用

设计和建立了一套能耐高温的用于多相催化反应研究的原位红外系统，反应温度从室温到１１５０Ｋ，系统真空为１．０＊１０＾５－１．０－１０＾－４Ｐａ，红外光谱检测范围为４８００－２００ｃｍ＾－１。此系统扩展了原仪器的功能，提高了仪器利用率和效率。     

AT1受体的中药活性成分筛选模型及其作用机理研究

传统中药对治疗心血管类疾病疗效显著,例如钩藤、黄芪、益母草等在临床应用广泛.现代药理研究表明钩藤碱可以降压;黄芪中毛蕊异黄酮能舒张血管平滑肌、保护心脑血管;益母草碱可扩张微血管,改善血液流变异常,但它们分子层面作用机制尚不明确.首先以牛视紫红质蛋白为模板,模建出心血管疾病主要靶点AT1受体的三维结构.然后将AT1受体拮抗剂和中药活性成分与受体模型结合的作用方式进行了对比研究,据此提出了中药活性成分治疗心血管疾病的作用机理,并建立了AT1受体的中药活性成分筛选模型.结果表明:黄芪毛蕊异黄酮等中药活性成分能与AT1受体活性口袋中的残基发生氢键作用,结合方式与AT1受体拮抗剂相似.每一种AT1受体拮抗剂均与His183,Lys199,His256,Gln257,Ser105,Ser109,Tyr113,Asn200中多个发生氢键作用;黄芪毛蕊异黄酮与Try113,Lys199,Gln257,Ser105发生氢键作用.本研究从分子层面上阐释了一些中药活性小分子的治病机理,为进一步挖掘中药资源,研究AT1受体相关的心脑血管类药物,合理设计和筛选AT1受体的拮抗剂提供重要依据.     

Ion-Selective Electrode Determination of Calcium and Potassium in Bovine Skim-Milk Powder

Abstract

Ion-selective electrode determinations of potassium and calcium have been carried out on skim milk powder and the results compared with data obtained by flame emission spectroscopy for potassium and by atomic absorption spectroscopy for calcium. The data indicate that ion-selective electrodes can be used as an alternative to spectroscopic methods for determining these metals by using a dry-ashing pretreatment procedure. Acid digestion pretreatment is not recommended because of the ensuing high ionic strength and possible interferences. Sodium and magnesium contents obtained by spectroscopy are also quoted for interest. The various percentage metal contents are: potassium: 1.96 ± 0.155 (ISE direct) 1.81 ± 0.144 (ISE Gran) and 1.82 ± 0.076 (flame emission), sodium: 0.511 ± 0.017 (flame emission), calcium: 1.37 ± 0.095 (ISE direct), 1.36 + 0.079 (ISE Gran) and 1.41 ± 0.082 (flame aas), and magnesium 0.119 ± 0.003 (flame aas).     

含VE微胶囊的制备及其控制释放性能研究

以天然维生素E（VE）为芯材，利用Shirasu porous glass (SPG) 膜乳化结合液中干燥法，制备了粒径单分散的聚苯乙烯（PS）微胶囊.微胶囊的粒径为膜孔径的4倍，粒径单分散系数CV小于0.2.考察了改变PS和VE的比例及微胶囊的粒径对控制释放性能的影响.     

中红外光纤技术用于口腔肿瘤在体原位检测的研究

肿瘤是严重威胁人类健康和生命的疾病,早期诊断和及时治疗是提高肿瘤病人存活率的重要因素,肿瘤的发生和发展一般可分为3个阶段：(1)基因突变;(2)生物分子组成和结构发生改变;(3)细胞和组织形态发生变化,目前常用的影像学方法只能检测较大的肿块,组织标本的病理诊断法需在     

单分散聚苯乙烯微球的制备及表征

应用膜乳化-液中干燥法成功制备出粒径为2～20μm的单分散聚苯乙烯(PS)微球.PS微球的粒径主要由膜孔径决定,其值约为膜孔径的2倍;PS溶液的浓度对其也有一定的影响.膜乳化过程中的压力对微球粒径的分散性有很大的影响,在一定压力范围内,粒径呈单分散.在分散相中加入致孔剂,制备出表面多孔的PS微球.采用复乳-液中干燥法制备出中空PS微球.     

生物农药微胶囊壁材料研究

用原位聚合法对生物农药阿维菌素进行包囊,然后制备微胶囊制剂,并对用于该制剂的两种高分子囊壁材料-三聚氰胺甲醛树脂和脲醛树脂的性能进行了研究。结果表明,两种树脂皆为较好的生物农药用微胶囊缓释剂型的囊壁材料,其制备工艺简单,具有良好的稳定性、粒径大小与分布、悬浮性、缓释性等,包封率均达80％以上。其中三聚氰胺甲醛树脂悬浮性较脲醛树脂更好,缓释性更持久。     

扩散模型和凝聚模型耦合作用下胶体凝聚动力学的Monte Carlo模拟研究

以扩散模型(Ds(γ)=D0×sγ)和凝聚模型(Pij(σ)=P0×(i×j)σ)为基础,对胶体体系随时间的演变、团簇大小分布及其标度关系、团簇的重均大小S(t)的变化规律以及模型对最终分形维数的影响四个角度进行了比较研究,发现扩散指数γ0和凝聚概率指数σ0对胶体的凝聚动力学过程有相似的影响.本文在较宽的γ和σ取值范围内,对胶体的凝聚动力学进行了模拟研究,对慢速凝聚向快速凝聚的转化机理作了定量分析,并进一步分析了在团簇-团簇凝聚(CCA)模型下,得到类似扩散置限凝聚(DLA)模型的凝聚体的物理意义,结果表明:(1)γ0代表了体系中团簇或单粒做"定向运动"而非无规则的布朗运动的情况.这种"定向运动"的推动力可能来自于大团簇产生的强"长程范德华力"、"电场力"等,或来自于体系边界处的外力场的作用.(2)当σ0时,体系成为先快后慢的慢速凝聚,这可能对应大团簇为一排斥中心,即胶体颗粒存在"排斥力场"的现象.(3)证实了团簇的重均大小在凝聚过程的早期按指数规律增长,而后期按幂函数规律增长的实验现象.模拟研究还表明,胶体体系的凝聚动力学过程,在σ0时是一个存在正反馈机制的非线性动力学过程,而在σ0时则体现出负反馈的特征.     

Precise Control of Metal Oxide Thin Films Deposition in Magnetron Sputtering Plasmas for High Performance Sensing Devices Fabrication

Magnetron sputtering deposition is a widely used technique to deposit thin film precisely at nanoscale level. During the deposition of metal oxide thin films, reactive oxygen gas is introduced into the deposition chamber. Pure metal and metal oxide materials can be used as sputter target, although the simplest way is by using a pure metal target. In such reactive process, the effect of target poisoning significantly influence the deposition process and the growth mechanisms of metal oxide thin films became very complex. In general, external parameters such as discharge power, working pressure, reactive gases ratio and substrate temperature are used to optimize the properties of deposited thin films. Then, ex-situ analyses such as scanning electron microscope and X-ray diffraction analysis are performed to obtain the optimized parameter. Sample depositions and ex-situ analyses consume time to achieve the goal through try and error. In this article, in-situ plasma diagnostics are reviewed focusing on an optical emission spectroscopy to precisely control and investigate the sputter target poisoning effect during the deposition of metal oxide thin films. The emission of atomic lines from several metal and oxygen atoms were used to discuss the deposition mechanisms and their correlation with the deposited thin films was observed. Finally, the deposited metal oxide thin films were proposed and tested for several applications such as gas sensor and frequency selective surface glass.     

Fe-Cu/ZSM-5催化剂的NH_3-SCR脱硝性能

通过浸渍法制备了Fe和Cu含量比不同的系列Fe-Cu/ZSM-5催化剂,利用XRD、H2-TPR、NH3-TPD和原位DRIFTS等技术对催化剂进行了表征,并对其NH3-SCR脱硝性能进行了研究。结果表明,双金属改性的Fe-Cu/ZSM-5催化剂活性温度窗口拓宽,其中,Fe-Cu/ZSM-5 1∶4催化剂脱硝性能优异,250-450℃下脱硝效率均超过90%,335℃时脱硝效率达到最大值96.46%。铜和铁物种能以无定型氧化物良好分散于载体表面,双金属负载改性催化剂保留了ZSM-5的晶体结构。Fe-Cu/ZSM-5 1∶4催化剂具备丰富的酸性位、良好的氧化还原性能,一定温度条件下NH3-SCR反应过程中同时存在E-R机理和L-H机理,且E-R机理反应起始温度低于L-H机理;200℃为催化脱硝反应的起活温度。