Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

Some remarks on the Jensen-Hadamard inequalities and applications

We provide some inequalities and integral inequalities connected to the Jensen-Hadamard inequalities for convex functions. In particular, we give some refinements to these inequalities. Some natural applications and further extensions are given.

---

Sunto Forniamo alcune diseguaglianze e diseguaglianze integrali connesse alle dise-gueglianze di Jensen-Hadamard per funzioni convesse. In particolare, diamo qualche miglioramento di queste diseguaglianze. Alcune applicazioni naturali ed ulteriori estensioni sono date.

     

Effective-field theory and the nuclear many-body problem

We review many-body calculations of the equation of state of dilute neutron matter in the context of effective-field theories of the nucleon-nucleon interaction.     

Vehicle density and velocity estimation on highways for on-ramp metering control

A scheme for vehicle density and velocity estimation in a stretch of highway based on a modified cell transmission model [C. F. Daganzo, Transportation Research, Part B, 28B(4),269–287, 1994. Elsevier is presented. The scheme is intended for use with on-ramp metering control algorithms, providing local knowledge of densities and velocities that is helpful to improve on-ramp metering control performance. Estimation of density is obtained by nonlinear estimators, while velocity estimation is obtained by gradient algorithms. There is one density–velocity estimator for free traffic flow and other for congested traffic flow. Both estimator schemes work in parallel. The final estimation of density and velocity results from a convex combination of the predictions of the two estimators. This combination depends on occupancy or density measurements at the boundaries of the stretch and is produced by a fuzzy inference system. Stability and convergence of the density and velocity estimation scheme is proved by Lyapunov based techniques. Simulation results comparing measured and estimated traffic data are presented. They confirm good performance of the estimators. Research sponsored by grants UNAM PAPIIT IN110403 and CONACYT 47583.     

Laser spectroscopy of high spin isomers – a review

This review summarizes the experimental data on charge radii differences among ground state and high spin isomeric states determined by high-resolution laser spectroscopic methods. A comparison is presented between radii changes obtained from the isomeric shifts in the atomic spectra and from the quadrupole moments of both ground and isomeric states under the assumption that the radii changes are determined by the difference of the quadrupole deformations. Special attention is paid to isomers arising from the break-up of nucleon pairs and isomers of odd–odd nuclei. The characteristic features of the radii changes for isomeric states of different origin are discussed.     

Bending-torsion vibration of a partially submerged cylinder with an arbitrary cross-section

An analytical method is presented to investigate the bending-torsion vibration characteristics of a cylinder with an arbitrary cross-section and partially submerged in water. The compressibility and the free surface waves of the water are considered simultaneously in the analysis. The exact solution of structure–water interaction is obtained mathematically. Firstly, the analytical expression of the velocity potential of the water is derived by using the method of separation of variables. The unknown coefficients in the velocity potential are determined by the longitudinal and circumferential Fourier expansions along the outer surface of the cylinder and are expressed in the form of integral equations including the unknown dynamic bending deflection and torsional angle of the cylinder. Secondly, the force and torque acting on the cylinder per unit length, provided by the water, are obtained by integrating the water dynamic pressure along the circumference of the cylinder. The general solution of bending-torsion vibration of the cylinder under the water dynamic pressure is derived analytically. The integral equations included in the velocity potential of the water can be solved exactly. Finally, the eigenfrequency equation of cylinder–water interaction is obtained by means of the boundary conditions of the cylinder. Some numerical examples for elliptical columns partially submerged in water are provided to show the application of the present method.     

On the convergence rate and optimization of a numerical method with splitting of boundary conditions for the stokes system in a spherical layer in the axisymmetric case: Modification for thick layers

The convergence rate of a fast-converging second-order accurate iterative method with splitting of boundary conditions constructed by the authors for solving an axisymmetric Dirichlet boundary value problem for the Stokes system in a spherical gap is studied numerically. For R/r exceeding about 30, where r and R are the radii of the inner and outer boundary spheres, it is established that the convergence rate of the method is lower (and considerably lower for large R/r) than the convergence rate of its differential version. For this reason, a really simpler, more slowly converging modification of the original method is constructed on the differential level and a finite-element implementation of this modification is built. Numerical experiments have revealed that this modification has the same convergence rate as its differential counterpart for R/r of up to 5 × 10³. When the multigrid method is used to solve the split and auxiliary boundary value problems arising at iterations, the modification is more efficient than the original method starting from R/r ～ 30 and is considerably more efficient for large values of R/r. It is also established that the convergence rates of both methods depend little on the stretching coefficient η of circularly rectangular mesh cells in a range of η that is well sufficient for effective use of the multigrid method for arbitrary values of R/r smaller than ～ 5 × 10³.     

<Emphasis Type="Italic">Comment on</Emphasis>¶Low temperature specific heat of blue bronze K <Emphasis Type="Bold">0.30</Emphasis>MoO <Emphasis Type="Bold">3</Emphasis>, by J. Odin,J.C. Lasjaunias,K. Biljaković, K. Hasselbach,and P. Monceau

Eur. Phys. J. B 24, 315 (2001) Here we comment on a recently published paper on the presence of a phason contribution in the low temperature heat capacity data of the charge-density-wave compounds K_0.3MoO₃ and (TaSe₄)₂I. We have shown that the anomaly in the C _P / T ³ data reported by Odin et al. is straightforwardly interpreted in terms of low energy phonon modes resulting from the peculiar topology of these compounds. Received 21 February 2002 Published online 19 July 2002     

具功能反应的三种群捕食者——食饵系统数学模型稳定性的研究

[1]中提出了具有功能反应的三种群捕食者——食饵系统的两种模型(Ⅰ)、(Ⅱ),并给出了局部渐近稳定的条件。本文研究了另外两种模型(Ⅲ)和(Ⅳ)的局部渐近稳定的条件。