Ternary diffusion coefficients of diethylene glycol and lithium chloride in aqueous solutions containing diethylene glycol and lithium chloride

In this work, ternary diffusion coefficients of diethylene glycol and lithium chloride in aqueous solutions containing diethylene glycol and lithium chloride were reported for temperatures (303.2, 308.2, and 313.2 K) using the Taylor dispersion method. The investigated ternaries contained total glycol–salt concentrations of 10, 15, and 20 wt%. The main diffusion coefficients (D₁₁ and D₂₂) and the cross-diffusion coefficients (D₁₂ and D₂₁) were discussed as function of temperature and concentration. A modified equation originally proposed by Batchelor [1] for mixture of hard spheres in a continuum solvent was used to correlate the present diffusion coefficient data and the results are satisfactory.     

Alcohols Promoted Green Protocol for Biginelli Reaction

A green chemistry protocol using ethylene glycol and diethylene glycol is developed for the synthesis of dihydropyrimidinones.     

Synthesis of nano-TiO2 assisted by diethylene glycol for use in high efficiency dye-sensitized solar cells

The performance of dye-sensitized solar cells(DSSCs) consisting of anatase TiO_2 nanoparticles that were synthesized via a hydrothermal method was studied.The synthesized TiO_2 nanoparticles were characterized by X-ray diffraction(XRD),nitrogen sorption analysis,scanning electron microscopy(SEM),high resolution transmission electron microscopy(HRTEM),and UV-vis spectroscopy.Then the J-Vcurve,electrochemical impedance spectroscopy(EIS),and open-circuit voltage decay(OCVD) measurement were applied to evaluate the photovoltaic performance of DSSCs.Compared with the commercial TiO_2nanoparticles(P25),the synthesized-TiO_2 nanoparticles showed better performance.By adding diethylene glycol(DEG) before the hydrothermal process,the synthesized TiO_2 nanoparticles(hereafter referred to as TiO_2-DEG particles) shows narrower size distribution,larger specific surface area,higher crystallinity,and less surface defects than TiO_2(DEG free) particles.The analysis of photovoltaic properties of DSSCs based on TiO_2-DEG particles showed that the recombination of electron-hole pairs was decreased and the trapping of carries in grain boundaries restrained.It was believed that the photoelectrode fabricated with the as-prepared TiO_2 nanoparticles improved the loading amount of dye sensitizers(N719).and enhanced the photocurrent of the DSSCs.As a result,the TiO_2-DEG particle based cells achieved a photo-to-electricity conversion efficiency(η) of 7.90%,which is higher than 7.53%for the cell based on TiO2(DEG free) and 6.59%for the one fabricated with P25.     

PET结晶行为研究进展

从二甘醇含量、催化剂、物理老化,增强纤维等方面综述了影响PET结晶行为的研究进展,并介绍了提高PET结晶速率的方法。     

Oligo(p-phenylene-ethynylene)s with backbone conformation controlled by competitive intramolecular hydrogen bonds

A series of conjugated oligo(p-phenylene-ethynylene) (OPE) molecules with backbone conformations (that is, the relative orientations of the contained phenylene units) controlled by competitive intramolecular hydrogen bonds to be either co-planar or random were synthesised and studied. In these oligomers, carboxylate and amido substituents were attached to alternate phenylene units in the OPE backbone. These functional groups were able to form intramolecular hydrogen bonds between neighbouring phenylene units. Thereby, all phenylene units in the backbone were confined in a co-planar conformation. This planarised structure featured a more extended effective conjugation length than that of regular OPEs with phenylene units adopting random orientation due to a low rotational-energy barrier. However, if a tri(ethylene glycol) (Tg) side chain was appended to the amido group, it enabled another type of intramolecular hydrogen bond, formed by the Tg chain folding back and the contained ether oxygen atom competing with the ester carbonyl group as the hydrogen-bond acceptor. The outcome of this competition was proven to depend on the length of the alkylene linker joining the ether oxygen atom to the amido group. Specifically, if the Tg chain folded back to form a five-membered cyclic structure, this hydrogen-bonding motif was sufficiently robust to overrule the hydrogen bonds between adjacent phenylene units. Consequently, the oligomers assumed non-planar conformations. However, if the side chain formed a six-membered ring by hydrogen bonding with the amido NH group, such a motif was much less stable and yielded in the competition with the ester carbonyl group from the adjacent phenylene unit. Thus, the hydrogen bonds between the phenylene units remained, and the co-planar conformation was manifested. In our system, the hydrogen bonds formed by the back-folded Tg chain and amido NH group relied on a single oxygen atom as the hydrogen-bond acceptor. The additional oxygen atoms in the Tg chain made a negligible contribution. A bifurcated hydrogen-bond motif was unimportant. From our results, in combination with the results from an independent study by Meijer et al., it is evident that intramolecular hydrogen bonds involving back-folded oligo(ethylene glycol) moieties may differ in their structural details. Absorption spectroscopy served as a convenient yet sensitive technique for analysing hydrogen-bonding motifs in our study.     

Wide-bore capillary column for the direct analysis of ethanolamines and ethylene glycols

Summary The GC separation of a mixture of three ethanolamines and four ethylene glycols without any preliminary derivatization, on a wide-bore capillary column coated with Carbowax 20M is described. These high-boiling and polar compounds elute giving simmetrical peaks and show good resolution. The analysis is completed in less than 14 minutes.     

缩乙二醇双羟基新型键合固定相的合成及性能研究

双羟基硅胶键合固定相由于具有结构稳定、耐高压和抗溶剂性能强等特点,已引起色谱分析工作者的广泛注意,Regnier等曾合成含有6个碳原子的双羟基极性键合固定相,但由于碳链太短,限制了它在极性有机化合物上的应用。     

用~(60)Coγ-射线辐射交联二乙二醇丁二酸聚酯玻璃毛细管柱的研究

用~(60)Coγ-射线辐射交联二乙二醇丁二酸聚酯(DEGs)毛细管柱,考察了该固定相辐射交联的交联度,柱效和耐温情况,并实地用于菜子油的成分分析。结果表明,交联度可达50％,柱效3000/m。使用温度达220℃。     

Effect of transesterification reactions on the crystallization behaviour and morphology of poly(butylene/diethylene succinate) block copolymers

The melting behaviour, the crystallization kinetics and the morphology of block poly(butylene/diethylene succinate) copolymers (PBSPDGS) were investigated by means of differential scanning calorimetry and hot stage optical microscopy. Multiple endotherms were evidenced in the PBSPDGS samples, due to melting and recrystallization processes, similarly to PBS. By applying the Hoffman-Weeks’ method, the of both the homopolymer and the copolymers was derived. The isothermal crystallization kinetics was analyzed according to the Avrami’s treatment. The copolymers with long PBS blocks are characterized by a very similar behaviour with respect to pure poly(butilene succinate), indicating that PBS macromolecular folding is not affected by the presence of non-crystallizable diethylene succinate blocks. On the contrary, the copolymers characterized by very short PBS block length were found to crystallize at a slower rate than the homopolymer. As a matter of fact, a higher value of the work of chain folding was also derived on the basis of Hoffman-Lauritzen nucleation theory. Anyway, in all cases the crystallization mechanism (heterogeneous nucleation and three-dimensional growth) was found to be the same.