对电泳液中颜料粒子运动性能的研究

详细介绍了胶体悬浮液作为一种显示用电泳液时的电学性能,分析了电泳颗粒的运动特征;针对目前有些文献中提到的介电泳现象以及利用介电泳现象制成的无源矩阵驱动方式,从理论角度进行了分析。指出介电泳现象在理论上确实存在,但是绝大多数的电泳液在显示时介电泳现象都很微弱,很难实现廉价、大面积的无源矩阵驱动;最后以一种电泳液为例测试了其反射谱,从实验角度验证了此结论, 并给出了最佳的驱动参数。     

微电极阵列芯片的脂质体电融合研究

利用旋转蒸发法制作基于大豆卵磷脂的一种大型脂质体,在微电极阵列芯片上进行脂质体电融合实验研究.在电融合过程中,利用介电电泳力实现脂质体在微流控芯片中的排队,再利用高场强的电脉冲使脂质体膜发生可逆性电穿孔,在持续的介电电泳力作用下,使穿孔的脂质体实现融合.芯片上脂质体的融合率可以达到20％左右.而且,玻璃基底材料和低深宽比的通道结构更有利于脂质体融合过程的观察与控制.     

Measurement of the real part of the Clausius–Mossotti factor of dielectrophoresis for Brownian particles

A method is proposed for measuring the real part of the Clausius–Mossotti factor () of dielectrophoresis for Brownian particles based on a solution of the Smoluchowski equation using a designed polydimethysilloxane microchannel with planar hyperbolic electrodes on its glass substrate. An approximate two-dimensional spring-like dielectrophoretic force is generated in the device, and the data necessarily measured is the time evolution of the in-plane particle displacement undergoing confined Brownian motion. Validity of the measurement was checked against the zeta potentials in the literature based on the classical theory of surface conductance using polystyrene particles of size of one micron. As the dielectrophoretic force depends on , which is usually unknown for bio-particles and some engineered particles, and is seldom measured; this study is important from the academic point of view and could be helpful for the manipulation and characterization of sub-micron particles using dielectrophoresis. Extension of the method to the measurement of permanent dipole moment and total polarizability of particle was developed theoretically and discussed by incorporating an optical tweezer into the present device.     

Synthetic electrically driven colloids: A platform for understanding collective behavior in soft matter

The collective motion of synthetic active colloids is an emerging area of research in soft matter physics and is important both as a platform for fundamental studies ranging from non-equilibrium statistical mechanics to the basic principles of self-organization, emergent phenomena, and assembly underlying life, as well as applications in biomedicine and metamaterials. The potentially transformative nature of the field over the next decade and beyond is a topic of critical research importance. Electrokinetic active colloids represent an extremely flexible platform for the investigation and modulation of collective behavior in active matter. Here, we review progress in the past five years in electrokinetic active systems and related topics in active matter with important fundamental research and applicative potential to be investigated using electrokinetic systems.     

Cell-cell contact and membrane spreading in an ultrasound trap

An ultrasonic standing wave trap [Langmuir 19 (2003) 3635] in which the morphologies of 2-D latex–microparticle aggregates, forming a pressure node plane, were characterised has been applied here to different cell suspensions with increasing order of specificity of cross-linking molecule, i.e. polylysine with chondrocytes; wheat germ agglutinin (WGA) with erythrocytes and surface receptors on neural cells. The outcome of initial cell–cell contact, i.e. whether the cells stuck at the point of contact (collision efficiency=1) or rolled around each other (collision efficiency=0), was monitored in situ by video-microscopy. The perimeter fractal dimensions (FD) of 2-D hexagonally symmetric, closely packed aggregates of control erythrocytes and chondrocytes were 1.16 and 1.18, respectively while those for the dendrititc aggregates formed initially by erythrocytes in 0.5 μg/ml WGA and chondrocytes in 20 μg/ml polylysine were 1.49 and 1.66. The FDs for control and molecularly cross-linked cells were typical of reaction-limited aggregation (RLA) and transport diffusion-limited aggregation (DLA), respectively. The FDs of the aggregates of cross-linked cells decreased with time to give more closely packed aggregates without clear hexagonal symmetry. Suspensions of neural cells formed dendritic aggregates. Spreading of inter-cellular membrane contact area occurred over 15 min for both erythrocyte and neural cell dendritic aggregates. The potential of the technique to characterise and control the progression of cell adhesion in suspension away from solid substrata is discussed.     

Joule heating effects in optimized insulator‐based dielectrophoretic devices: An interplay between post geometry and temperature rise

Insulator‐based dielectrophoresis (iDEP) is the electrokinetic migration of polarized particles when subjected to a non‐uniform electric field generated by the inclusion of insulating structures between two remote electrodes. Electrode spacing is considerable in iDEP systems when compared to electrode‐based DEP systems, therefore, iDEP systems require high voltages to achieve efficient particle manipulation. A consequence of this is the temperature increase within the channel due to Joule heating effects, which, in some cases, can be detrimental when manipulating biological samples. This work presents an experimental and modeling study on the increase in temperature inside iDEP devices. For this, we studied seven distinct channel designs that mainly differ from each other in their post array characteristics: post shape, post size and spacing between posts. Experimental results obtained using a custom‐built copper Resistance Temperature Detector, based on resistance changes, show that the influence of the insulators produces a difference in temperature rise of approximately 4°C between the designs studied. Furthermore, a 3D COMSOL model is also introduced to evaluate heat generation and dissipation, which is in good agreement with the experiments. The model allowed relating the difference in average temperature for the geometries under study to the electric resistance posed by the post array in each design.     

Bacteria capture, concentration and detection by alternating current dielectrophoresis and self-assembly of dispersed single-wall carbon nanotubes

The high polarizability and dielectrophoretic mobility of single-walled carbon nanotubes (SWNT) are utilized to capture and detect low numbers of bacteria and submicron particles in milliliter-sized samples. Concentrated SWNT solutions are mixed with the sample and a high-frequency (>100 kHz) alternating current (AC) field is applied by a microelectrode array to enhance bulk absorption of the particles (bacteria and nanoparticle substitutes) by the SWNTs via dipole-dipole interaction. The same AC field then drives the SWNT-bacteria aggregates to the microelectrode array by positive-AC dielectrophoresis (DEP), with enhanced and reversed bacteria DEP mobility due to the attached SWNTs. Since the field frequency exceeds the inverse RC time of the electrode double layer, the AC field penetrates deeply into the bulk and across the electrode gap. Consequently, the SWNTs and absorbed bacteria assemble rapidly (<5 min) into conducting linear aggregates between the electrodes. Measured AC impedance spectra by the same trapping electrodes and fields show a detection threshold of 10(4) bacteria/mL with this pathogen trapping and concentration technique.     

Particle trapping using dielectrophoretically patterned carbon nanotubes

This study presents the dielectrophoretic (DEP) assembly of multi‐walled carbon nanotubes (MWCNTs) between curved microelectrodes for the purpose of trapping polystyrene microparticles within a microfluidic system. Under normal conditions, polystyrene particles exhibit negative DEP behaviour and are repelled from microelectrodes. Interestingly, the addition of MWCNTs to the system alters this situation in two ways: first, they coat the surface of particles and change their dielectric properties to exhibit positive DEP behaviour; second, the assembled MWCNTs are highly conductive and after the deposition serve as extensions to the microelectrodes. They establish an array of nanoelectrodes that initiates from the edge of microelectrodes and grow along the electric field lines. These nanoelectrodes can effectively trap the MWCNT‐coated particles, since they cover a large portion of the microchannel bottom surface and also create a much stronger electric field than the primary microelectrodes as confirmed by our numerical simulations. We will show that the presence of MWCNT significantly changes performance of the system, which is investigated by trapping sample polystyrene particles with plain, COOH and goat anti‐mouse IgG surfaces.     

Light induced DEP for immobilizing and orienting Escherichia coli bacteria

Manipulating bacteria and understanding their behavior when interacting with different substrates are of fundamental importance for patterning, detection, and any other topics related to health-care, food-enterprise, etc. Here, we adopt an innovative dielectrophoretic (DEP) approach based on electrode-free DEP for investigating smart but simple strategies for immobilization and orientation of bacteria. Escherichia coli DH5-alpha strain has been selected as subject of the study. The light induced DEP is achieved through ferroelectric iron-doped lithium niobate crystals used as substrates. Due to the photorefractive (PR) property of such material, suitable light patterns allow writing spatial-charges-distribution inside its volume and the resultant electric fields are able to immobilize E. coli on the surface. The experiments showed that, after laser irradiation, about 80% of bacteria is blocked and oriented along a particular direction on the crystals within an area of few square centimeters. The investigation presented here could open the way for detection or patterning applications based on a new driving mechanism. Future perspectives also include the possibility to actively switch by light the DEP forces, through the writing/erasing characteristic of PR fields, to dynamically control biofilm spatial structure and arrangement.