Toward low-voltage dielectrophoresis-based microfluidic systems: A review

Dielectrophoretically driven microfluidic devices have demonstrated great applicability in biomedical engineering, diagnostic medicine, and biological research. One of the potential fields of application for this technology is in point-of-care (POC) devices, ideally allowing for portable, fully integrated, easy to use, low-cost diagnostic platforms. Two main approaches exist to induce dielectrophoresis (DEP) on suspended particles, that is, electrode-based DEP and insulator-based DEP, each featuring different advantages and disadvantages. However, a shared concern lies in the input voltage used to generate the electric field necessary for DEP to take place. Therefore, input voltage can determine portability of a microfluidic device. This review outlines the recent advances in reducing stimulation voltage requirements in DEP-driven microfluidics.     

Electrical actuation of dielectric droplets by negative liquid dielectrophoresis

This paper presents an electrical actuation scheme of dielectric droplet by negative liquid dielectrophoresis. A general model of lumped parameter electromechanics for evaluating the electromechanical force acting on the droplets is established. The model reveals the influence of actuation voltage, device geometry, and dielectric parameter on the actuation force for both conductive and dielectric medium. Using this model, we compare the actuation forces for four liquid combinations in the parallel-plate geometry and predict the low voltage actuation of dielectric droplets by negative dielectrophoresis. Parallel experimental results demonstrate such electric actuation of dielectric droplets, including droplet transport, splitting, merging, and dispending. All these dielectric droplet manipulations are achieved at voltages < 100 V_rms. The frequency dependence of droplet actuation velocity in aqueous solution is discussed and the existence of surfactant molecules is believed to play an important role by realigning with the AC electric field. Finally, we present coplanar manipulation of oil and water droplets and formation of oil-in-water emulsion droplet by applying the same low voltage.     

Design and fabrication of a dielectrophoresis-based cell-positioning and cell-culture device for construction of cell networks

In this paper, we describe the design and fabrication of a dielectrophoresis (DEP)-based cell-positioning and cell-culture device for the construction of cell networks. This device enables both individual cell positioning and cell culture. Titanium electrodes were fabricated by deposition. Furthermore, microchambers and microchannels composed of SU-8, which is a negative photoresist, were used to carry out cell culture and enable cell differentiation. Using our device, N1E-115 cells were individually positioned in the microchambers, and the positioning yield was 45%. After positioning, the cells could be continuously cultured in the microchambers. Furthermore, the cells differentiated, and their neurites extended through the microchannels after cultivation for several days. These results indicate that our device greatly increases the prospects for individual cell positioning and can be used to construct cell networks that have several applications in the medical field, for example, in drug screening.     

Dielectrophoresis assisted immuno-capture and detection of foodborne pathogenic bacteria in biochips

This study integrated dielectrophoresis (DEP) with non-flow through biochips to enhance the immuno-capture and detection of foodborne pathogenic bacteria. It demonstrated two major functions provided by DEP to improve the chip performance: (i) concentrating bacterial cells from the suspension to different locations on the chip surface by positive and negative DEP; (ii) making the cells in close contact with the immobilized antibodies on the chip surface so that immuno-capture efficiency can be dramatically enhanced.The microchip achieved the immuno-capture efficiencies of ∼56.0% and ∼64.0% to Salmonella cells with 15 and 30 min DEP, respectively, which were considerably higher than those of ∼10.4% and ∼17.6% for 15 and 30 min immuno-capture without DEP. The immuno-captured bacterial cells were detected by the sandwich format ELISA on the chips. The final absorbance signals were enhanced by DEP assisted immuno-capture by 64.7-105.2% for the samples containing 10³-10⁶ cells/20 μl. The integration of DEP with the biochips has the potential to advance the chip-based immunoassay methods for microbial detection.     

基于介电电泳的微流控细胞分离芯片的研究进展

细胞分离技术是细胞分选和细胞种群纯化的重要手段,在生物、医学、农业、环境等许多领域都有重要的应用,是当前生化分析领域的国际研究热点。本文介绍了基于介电电泳的微流控细胞分离芯片的研究现状,阐述了介电电泳的工作原理,并依据细胞尺寸、电极形状、外加信号方式等影响细胞介电电泳的关键因素对不同类型的微流控细胞分离芯片进行了详细介绍,并对该技术的未来发展趋势做了展望。     

Numerical comparison between Maxwell stress method and equivalent multipole approach for calculation of the dielectrophoretic force in single-cell traps

This paper presents detailed numerical calculations of the dielectrophoretic force in traps designed for single-cell trapping. A trap with eight planar electrodes is studied for spherical and ellipsoidal particles using the boundary element method (BEM). Multipolar approximations of orders one to three are compared with the full Maxwell stress tensor (MST) calculation of the electrical force on spherical particles. Ellipsoidal particles are also studied, but in their case only the dipolar approximation is available for comparison with the MST solution. The results show that a small number of multipolar terms need to be considered in order to obtain accurate results for spheres, even in the proximity of the electrodes, and that the full MST calculation is only required in the study of non-spherical particles.     

Recent advances in direct current electrokinetic manipulation of particles for microfluidic applications

Microfluidic devices have been extensively used to achieve precise transport and placement of a variety of particles for numerous applications. A range of force fields have thus far been demonstrated to control the motion of particles in microchannels. Among them, electric field‐driven particle manipulation may be the most popular and versatile technique because of its general applicability and adaptability as well as the ease of operation and integration into lab‐on‐a‐chip systems. This article is aimed to review the recent advances in direct current (DC) (and as well DC‐biased alternating current) electrokinetic manipulation of particles for microfluidic applications. The electric voltages are applied through electrodes that are positioned into the distant channel‐end reservoirs for a concurrent transport of the suspending fluid and manipulation of the suspended particles. The focus of this review is upon the cross‐stream nonlinear electrokinetic motions of particles in the linear electroosmotic flow of fluids, which enable the diverse control of particle transport in microchannels via the wall‐induced electrical lift and/or the insulating structure‐induced dielectrophoretic force.     

Scaling law analysis of electrohydrodynamics and dielectrophoresis for isomotive dielectrophoresis microfluidic devices

Isomotive dielectrophoresis (isoDEP) is a unique DEP geometrical configuration where the gradient of the field-squared () is constant. IsoDEP analyzes polarizable particles based on their magnitude and direction of translation. Particle translation is a function of the polarizability of both the particles and suspending medium, the particles’ size and shape, and the frequency of the electric field. However, other electrokinetics act on the particles simultaneously, including electrothermal hydrodynamics. Hence, to maximize the DEP force relative to over electrokinetic forces, design parameters such as microchannel geometry, fabrication materials, and applied electric field must be properly tuned. In this work, scaling law analyses were developed to derive design rules, relative to particle diameter, to reduce unwanted electrothermal hydrodynamics relative to DEP-induced particle translation. For a particle suspended in 10 mS/m media, if the channel width and height are below ten particle diameters, the electrothermal-driven flow is reduced by ∼500 times compared to a channel that is 250 particles diameters in width and height. Replacing glass with silicon as the device's underlying substrate for an insulative-based isoDEP reduces the electrothermal induced flow approximately 20 times less.     

Modeling of cellular pearl chain formation using a double photoconductive layer biochip

A typical double photoconductive layer biochip focusing biological cells and forming specific pearl chains has been studied theoretically in this paper. It was composed of two photoconductive layers coated on the bottom and top of ITO-based glass. A light pattern was used to create face-to-face virtual electrodes and the resulting oscillatory spatial electric field was employed to induce the motion of polarizable neutral particles. In order to estimate the behaviors of the suspended particles, a numerical model including dielectrophoretic forces, dipole–dipole forces and other forces, was implemented by means of the Monte Carlo method. The results indicated that steady-state chains could be formed in a uniform electric field owing to the dipole moment effect. In a non-uniform electric field created by the use of a light pattern, the positive DEP force created a more focused pattern of chains. The work concerning the numerical simulation indicated that this chip could form fixed-length particle chains in perpendicular alignment to satisfy the structured assembly of tissues in the histological engineering application.     

Dielectrophoretic choking phenomenon of a deformable particle in a converging‐diverging microchannel

The translational motion of small particles in an electrokinetic fluid flow through a constriction can be enhanced by an increase of the applied electric potential. Beyond a critical potential, however, the negative dielectrophoresis (DEP) can overpower other forces to prevent particles that are even smaller than the constriction from passing through the constriction. This DEP choking phenomenon was studied previously for rigid particles. Here, the DEP choking phenomenon is revisited for deformable particles, which are ubiquitous in many biomedical applications. Particle deformability is measured by the particle shear modulus, and the choking conditions are reported through a parametric study that includes the channel geometry, external electric potential, and particle zeta potential. The study was carried out using a numerical model based on an arbitrary Lagrangian‐Eulerican (ALE) finite‐element method.