Homogeneous hypersurfaces in complex hyperbolic spaces

We study the geometry of homogeneous hypersurfaces and their focal sets in complex hyperbolic spaces. In particular, we provide a characterization of the focal set in terms of its second fundamental form and determine the principal curvatures of the homogeneous hypersurfaces together with their multiplicities.      

Speech enhancement using linearly constrained adaptive constant directivity beam-formers

This paper aims to extend previous work on constant directivity beam-formers (CDBs), for the case of multiple desired speech sources, by designing a linearly constrained adaptive CDB (LCA-CDB) which preserves the beam-pattern in multiple look directions. Also, the proposed LCA-CDB, adaptively, minimizes the transient noise power in the output of the beam-former, and furthermore, produces some controlled nulls (controlled in both amplitude and angle) on the beam-pattern. This strengthens the system in removing permanent directional noises and producing a frequency-invariant beam-pattern with multiple main-lobes and controlled nulls in arbitrary frequency bands. Through simulating the system and the acoustical situations, the authors have tried to demonstrate the capability of the proposed method in enhancement of broadband and telephony speech in the presence of various noise sources (transient noise, permanent noise and uncorrelated white Gaussian noise). The simulation results obtained in this study confirm the efficiency of the proposed method in suppression of environmental noises.     

A constant modulus algorithm for blind equalization in α-stable noise

Channel noise is often assumed to be Gaussian in most of the existing channel equalization algorithms. The performance of these algorithms will degrade seriously when the noise is non-Gaussian. This paper deals with the problem of blind channel equalization in impulsive noise environment that is modeled as α-stable process. A modified adaptive error-constrained constant modulus algorithm (MAECCMA) is proposed by soft-limiting the amplitude of the equalizer input and transforming the error signal of the original adaptive error-constrained constant modulus algorithm (AECCMA) nonlinearly to suppress the influence of α-stable noise. Computer simulation results of two underwater acoustic channels show that, MAECCMA has almost the same performance as AECCMA and they both have faster convergence rate than constant modulus algorithm (CMA) and normalized least mean absolute deviation (NLMAD) algorithm in Gaussian noise, while MAECCMA provides the best performance of those four algorithms in α-stable noise.     

Legendre函数加权的声纳宽频带恒定束宽波束特性分析*

为了处理水声信号,声纳阵列通常需要形成宽频带恒定束宽的波束。采用两种阵元加权方法分析二维圆弧形恒定束宽换能器声纳阵列:球面Legendre函数加权方法和柱面Legendre函数加权方法。分别对球面阵、柱面阵和平面阵这三种几何结构的声纳阵列进行分析,并且计算波束宽度和波束方向。结果表明,在宽频带范围内,除了柱面Legendre函数加权的球面阵之外,其余Legendre函数加权的声纳阵列均能利用简单的、不随频率变化的阵元权重和阵元延时,形成恒定束宽的波束,并且具有较小的旁瓣,此外波束方向与预设方向也较为一致。相对于其他恒定束宽波束形成方法,Legendre函数加权方法能利用较低的计算复杂度来实现良好的宽频带恒定束宽的波束特性。     

Design of a curved surface constant force mechanism

A new curved surface constant force mechanism which mainly consists of a roller and a curved surface has been proposed. The magnitude and the direction of normal force caused by squeezing between the roller and the curved surface satisfy a certain relationship, thus the decomposed force of the normal force keeps constant in a certain direction all the times. According to the envelope theorem, the trajectory of the roller center and the profile of the curved surface are obtained by ignoring friction. Then, the influence of the friction is discussed in detail. In addition, the simulation is performed to verify the theoretical calculation. The simulation results show that the output force is relatively constant and the friction has little effect on the output force.     

Snap-through under unilateral displacement control with constant velocity

When the side of a beverage can or the domed lid of a jar is pushed inward, all or part of the structure may suddenly snap into an inverted configuration. The velocity of the pushing motion affects this instability. Most previous analyses of snap-through have considered force control (increasing the pushing force, e.g., a weight). Snap-through under dynamic, unilateral displacement control is investigated here, with the indentor moving at constant velocity (as in a universal testing machine) until snap-through occurs. Shallow elastic arches with immovable pinned ends are analyzed. Attention is focused on the critical height of the indentor at which snap-through is initiated. The effects of the indentor velocity, indentor location along the span, initial arch height, and damping magnitude are investigated. In addition, experiments are conducted on shallow buckled beams, which behave similarly to arches. Usually, the higher the indentor velocity, the further the indentor must move before snap-through occurs.     

常压溶剂法合成抗氧剂3114反应热力学和动力学

研究了常压溶剂法一步合成抗氧剂3114反应热力学和动力学过程。控制温度在117±2℃,研究结果表明,反应是零级反应,反应速率常数为k=1．91×10^-3／min,反应的平衡常数为K=138．4（mol／L）^-6,反应活化能Ea=1366J／mol。     

On Lipschitz solutions of the constant astigmatism equation

We show that the solutions of the constant astigmatism equation that correspond to a class of surfaces found by Lipschitz in 1887, exactly match the Lie symmetry invariant solutions and constitute a four-dimensional manifold. The two-dimensional orbit space with respect to the Lie symmetry group is described. Our approach relies on the link between constant astigmatism surfaces and orthogonal equiareal patterns. The counterpart sine–Gordon solutions are shown to be Lie symmetry invariant as well.     

On the tangential stress anomaly in the displacement discontinuity method

It is shown that the anomaly associated with the incorrect evaluation of tangential stresses in the displacement discontinuity (DD) method, commonly used to solve crack problems, is related to the order of singularity of the fundamental solutions of linear elasticity. It is established here that a minimum of linear variation of the shear DD distribution is needed to obtain the correct tangential stress jump across a crack. Alternatively, a correction term (‘patch’) that improves tangential stresses is derived. It is also shown that need for higher functionality is a fundamental requirement rather than a convenient artifice for obtaining better accuracy.