The symmetric and antisymmetric superexchange interactions in spin-Peierls system

The influences of Dzyaloshinskii Moriya （DM） interaction and Kaplan-Shekhtman-Entinwohlman-Aharony （KSEA） interaction on the dimerization of a spin-Peierls system are investigated theoretically by using the Lanczos numerical method. The ground state of the spin-Peierls system is still dimerized phase when both of the DM and the KSEA interactions have the same value with Heisenberg interaction. It is found that the KSEA interaction and uniform DM interaction are always against systemic dimerization, but the staggered DM interaction acts in favour of dimerization. Furthermore, the influences of the DM and the KSEA interactions are also studied in terms of the ground state index rate and the energy gap index rate of the dimerized Heisenberg system. The results show that the DM interaction makes the index rates larger, while the KSEA interaction makes them smaller.     

H-ZSM-5分子筛上的乙烯二聚反应机理的理论计算研究

应用分子力学和量子力学联合的ONIOM2(B3LYP/6-31G(d,p):UFF)计算方法研究了H-ZSM-5分子筛上乙烯二聚反应的机理. 用40T簇模型模拟ZSM-5分子筛位于孔道交叉点的酸性位,对乙烯二聚过程的分步反应和协同反应两种机理进行了考察. 对于分步反应机理,乙烯分子首先通过π-氢键作用在酸性位形成稳定的吸附络合物,再进一步发生质子化并生成乙醇盐中间体,随后乙醇盐与第二个乙烯分子发生碳-碳键结合形成丁醇盐产物. 第一步质子化和第二步碳链聚合的活化能分别为152.88和119.45 kJ/mol, 表明乙烯质子化反应为速控步骤. 对于协同反应机理,乙烯质子化、碳-碳键和碳-氧键生成同时进行,生成丁醇盐,反应的活化能为162.30 kJ/mol, 略高于分步反应机理中的速控步骤. 计算结果表明这两种反应机理之间存在相互竞争.     

Catalytic behavior tuning via structural modifications of silylated-diphosphine Ni(II) complexes for ethylene selective dimerization

The methylene spacers and an uncoordinated diphenylphosphine moiety in the scaffold of the CH₃Si(CH₂)_n(PPh₂)₃ and Si(CH₂PPh₂)₄-type silylated diphosphine Ni(II) complex systems have a marked impact on their catalytic performance in selective ethylene dimerization. Ni(II)-based precatalyst 1 , bearing two methylene spacers in its framework, exhibited the highest catalytic activity of 1.29 × 10⁸ g (mol_Ni)^-1 h^-1, while precatalyst 3 , with three methylene spacers, affords the highest product selectivity (88%) toward the C₄ fraction. Crystallographic investigations revealed that the precatalyst 3 adopts the mononuclear bidentate binding mode and the steric constraints of its uncoordinated diphenylphosphine moiety may successfully tailor the catalytic environment of the catalyst. The precatalyst 4 may form a dinuclear complex and exhibits high catalytic activity by changing the ligand/Ni molar ratio. The high C₄ selectivity of precatalyst 3 has been rationalized by density functional theory (DFT) calculations and found to be consistent with the experimental results. The study also revealed that designing new systems of Ni(II)-based complexes and their systematic modifications may further provide potential and industrially viable catalyst systems for selective ethylene oligomerization.     

Copper(I)-catalyzed diastereoselective formation of oxazolines and N-sulfonyl-2-imidazolines

A simple and short method for the reaction of methyl isocyanoacetate with aldehydes and N-sulfonylimines is presented. The reaction is catalyzed by copper(I) complexes and proceeds with excellent yields and high diastereoselectivities.     

η3-Allylnickel alkoxides and their use as homogeneous and heterogeneous catalysts for the dimerization of olefins

η³-Allylnickel alkoxides {η³-C₃H₅NiOR}₂ (R = Me, Et, i-Pr, Ph, SiPh₃) may be activated by gaseous boron trifluoride (BF₃) to give active catalysts for the dimerization of propene in homogeneous phase. In CH₂Cl₂ at ?20 °C catalytic turnover numbers of 5000 mol propene(mol Ni)^?1h^?1 were measured. The nature of the OR group influences both the catalytic activity and the oligomerization product distribution. The ratio of methylpentenes to dimethylbutenes in the dimer fraction may be controlled by the presence of additional phosphine ligands at the nickel atom. The nickel alkoxide precursor was heterogenized on alumina to give {Al₂O₃}–O–Ni–(η³-C₃H₅). Subsequent activation using gaseous BF₃ generates a powerful heterogeneous olefin dimerization catalyst which converts 50 × 10³ mol propene (mol Ni)^?1 at ?10° to ?5°C in a batchwise process and 143 × 10³ mol propene (mol Ni)^?1 continuously to give 75% dimers and 25% higher oligomers. The solvent-free treatment of oxide supports, e.g. alumina or silica, with gaseous BF₃ produces strong ‘solid acids’. The activated hydroxyl groups on the support surface serve as effective anchor sites for organometallic complexes to form heterogenous catalysts. By reaction of Ni(cod)₂ with {Al₂O₃}O(BF₃)H or {SiO₂}O(BF₃)H, η¹, η²-cyclo-octenylnickel–O fragments may be fixed to the surface. In the absence of halogenated solvents, the resulting catalysts, e.g. {SiO₂}O–(BF₃)–Ni–(η¹, η²-C₈H₁₃), dimerize propene continuously at +5°C at the rate of 800 × 10³ mol liquid propene (mol Ni)^?1.     

Remisporine B, a novel dimeric chromenone derived from spontaneous Diels-Alder reaction of remisporine A

A novel cyclopentachromenone, remisporine A, has been isolated from liquid culture of the marine fungus Remispora maritima. Remisporine A is not stable under normal conditions and autocatalytically dimerizes to give rise to a stereospecific product remisporine B via Diels-Alder reaction. The structure of remisporine B was elucidated by spectroscopic analyses including 2D-NMR and HRMS data.     

A kinetic study of the reaction between N,N-dimethyl-p-toluidine and its electrogenerated radical cation in a room temperature ionic liquid.

The reaction between N,N-dimethyl-p-toluidine (DMT) and the radical cation generated through its one-electron oxidation has been studied electrochemically in the room temperature ionic liquid N-methyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [Py14][NTf2]. Kinetic information obtained as linear sweep and cyclic voltammetry collected at 5 microm, 10 microm and 0.3 mm diameter platinum disk electrodes over a range of initial substrate concentrations and scan rates spanning five orders of magnitude was complemented by chronoamperometric measurements designed to probe the rate of diffusion. At the fastest scan rates the homogeneous reactions following the initial electron transfer were effectively out-run, facilitating an assessment of the electrode kinetics using DIGISIM and a validated Nicholson's method. Through digital simulation the voltammetry was then shown to be consistent with a mechanism established for the same reaction in acetonitrile, involving dimerisation of the DMT radicals following an initial and rate-determining proton transfer step. After careful consideration of all parameters, a bimolecular rate constant of (3.4 +/- 1.1) x 10(2) dm3 mol(-1) s(-1) was deduced by fitting the data. This was compared to the equivalent value for acetonitrile and, in light of this, the implications on the viability of ionic liquids for use as alternative mainstream solvents briefly assessed.     

Studies in stereoselective [2+2]-cycloadditions with dichloroketene

During the investigation of the reaction of dichloroketene with cyclic enoxy-lactones and acyclic enoxy-ester substrates it was found that only the acylic variants effectively participated in the [2+2]-cycloaddition. Although a complete understanding of the reasons for this are lacking, molecular mechanics calculations do suggest that an out of plane twist of the cabonyl group in the acyclic compounds may be partially responsible. After screening a variety of chiral auxiliaries it was found that useful levels of diastereoselectivity (2.6-10.8:1) could be obtained in this cycloaddition reaction when (R)-2,2-diphenylcyclopentanol was used as the chiral auxiliary.     

Effect of an oxidant on the nature of bulk defects in Li/CaO and its catalytic activity in the oxidative dimerization of methane

The nature of bulk defects formed in Li/CaO during the oxidative dimerization of methane with O₂ and N₂O as oxidants is studied with the use of ESR. Changing the oxidant from oxygen to nitrogen oxide results in changes in the nature of the bulk defects and the catalytic behavior of Li/CaO.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 599–601, March, 1993.