Design,Synthesis and Anticancer Activity of a New Series of N-aryl-N′-[4-(pyridin-2-ylmethoxy)benzyl]urea Derivatives

The development of cancer treatments requires continuous exploration and improvement, in which the discovery of new drugs for the treatment of cancer is still an important pathway. In this study, based on the molecular hybridization strategy, a new structural framework with an N-aryl-N’-arylmethylurea scaffold was designed, and 16 new target compounds were synthesized and evaluated for their antiproliferative activities against four different cancer cell lines A549, MCF7, HCT116, PC3, and human liver normal cell line HL7702. The results have shown seven compounds with 1-methylpiperidin-4-yl groups having excellent activities against all four cancer cell lines, and they exhibited scarcely any activities against HL7702. Among them, compound 9b and 9d showed greatly excellent activity against the four kinds of cells, and the IC₅₀ for MCF7 and PC3 cell lines were even less than 3 μM.     

Conductive 2D Metal-organic Framework (Co,NiCo, Ni) Nanosheets for Enhanced Non-enzymatic Detection of Urea

2D metal-organic framework (MOF) has potential applications in electrocatalysis owing to fast mass transfer, charge transfer and large specific surface area. Here, we had prepared three conductive 2D MOF based on Ni, NiCo and Co in a simple and rapid way. The 2D nanostructure of MOF was confirmed by SEM and TEM. The chemical composition was studied by XRD, Raman and XPS spectrum. The electrochemical oxidation and detection was investigated through cyclic voltammetry and current-time method. Their sensing performance for urea was determined by varying oxidation potentials and metal sites. The non-enzymatic Ni-, NiCo- and Co-MOF sensors had good catalytic activity for urea. Compared with NiCo- and Co-MOF, Ni-MOF had a wider linear range (0.5–832.5 μM), high sensitivity (1960 μA mM⁻¹ cm⁻²), low detection limit (0.471 μM), and fast response time. The sensors had well repeatability, reproducibility, and selectivity to specific interfering species. Furthermore, Ni- and NiCo-MOF modified electrode was also applied to detection of milk samples. The results showed that the recovery was satisfactory, which further confirmed the effectiveness of non-enzyme sensor. In general, the highly-sensitive 2D Ni- and NiCo-MOF modified electrode has great potential as nonenzymatic urea sensors for real samples detection in hydrogen energy, clinical diagnostics, and environmental protection, et al.     

Isoselective Ring-opening Polymerization of Racemic Lactide Catalyzed by N-heterocyclic Olefin/(Thio)urea Organocatalysts

The isoselective ring-opening polymerization of racemic lactide was achieved by combining N-heterocyclic olefin(NHO) with mono(thio)ureas or bis(thio)ureas as catalytic systems. The polymerization process shows high stereoselectivity, controllability and reactivity,delivering multi-block isotactic polylactides with high chain-end fidelity and narrow molecular weight distributions. The enhancement of catalytic performance was observed in the following order: bisthiourea(DTU) monothiourea(TU) bisurea(DU) urea(U). The highest Pm(probability of forming a meso dyad) = 0.91 was observed at-70 °C when using NHO/U1 catalytic system and the high stereoselectivity was attributed to chain-end control mechanism.     

Urea‐Induced Acid Amplification: A New Approach for Metal‐Free Insertion Chemistry

The enhanced catalytic activity of difluoroboronate ureas proved to be essential as an acidity amplifier to promote metal‐free O?H and S?H insertion reactions of α‐aryldiazoacetates in high yield. This methodology was found to be generally applicable to a broad substrate scope and presents a conceptually new approach for organocatalytic diazo insertion reactions. Mechanistic investigations suggest that the reaction pathway involves a urea‐induced protonation of the α‐aryldiazoester.     

Urea‐Based Porous Organic Frameworks: Effective Supports for Catalysis in Neat Water

Two urea‐based porous organic frameworks, UOF‐1 and UOF‐2, were synthesized through a urea‐forming condensation of 1,3,5‐benzenetriisocyanate with 1,4‐diaminobenzene and benzidine, respectively. UOF‐1 and UOF‐2 possess good hydrophilic properties and high scavenging ability for palladium. Their palladium polymers, Pd^II/UOF‐1 and Pd^II/UOF‐2, exhibit high catalytic activity and selectivity for Suzuki–Miyaura cross‐coupling reactions and selective reduction of nitroarenes in water. The catalytic reactions can be efficiently performed at room temperature. Palladium nanoparticles with narrow size distribution were formed after the catalytic reaction and were well dispersed in UOF‐1 and UOF‐2. XPS analysis confirmed the coordination of the urea oxygen atom with palladium. SEM and TEM images showed that the original network morphology of UOF‐1 and UOF‐2 was maintained after palladium loading and catalytic reactions.     

Nanoperlite effect on thermal,rheological, surface and cellular properties of poly lactic acid/nanoperlite nanocomposites for multipurpose applications

In this study, poly lactic acid (PLA) based nanocomposites containing perlite nanoparticles were prepared by melt mixing method. Various characterization techniques were employed to evaluate the performance PLA/nanoperlite nanocomposites. The nanocomposites were characterized via FTIR to investigate the functional groups and chemical structure of the nanocomposites. Thermal properties of the nanocomposites, examined by DSC, showed that the increase of nano-perlite content in the PLA matrix reduces the crystallinity and melting temperature of the nanocomposites. The rheological studies indicated that both of storage and loss modulus are increased when the nanoperlite is added up to 5 wt%. However, the modulus is reduced in samples containing more than 5 wt% nanoparticle due to their agglomeration. The in-vitro degradation studies of the nanocomposites at elevated and normal temperatures showed hydrolytic degradation around 13–15 months. The surface behavior results implied that the water contact angle values exhibit a reducing trend when the nanoperlite content increases up to 3 wt%, which can be related to the decreased crystallinity of PLA and also to the hydrophilic nature of perlite. Moreover, the adhesion of osteoblast cells and their viability on an electrospun scaffold, made of optimized sample, showed the initial implications of potential applications of the nanocomposites in bone regeneration and biomedical applications. These multipurpose nanocomposites can also be used for packaging applications.     

Fabrication and invitro evaluation of electrospun gum ghatti-polyvinyl alcohol polymeric blend green nanofibre mat (GG-PVA NFM) as a novel material for polymeric scaffolds in wound healing

The present research is mainly based on the fabrication of biodegradable nanofiber mats (NFM) through the process of electrospinning using a novel combination of Gum Ghatti (GG) and Poly vinyl alcohol (PVA). The prepared NFM was crosslinked (CL-1) using Glutaraldeyde-HCl vapours and was characterized for its tensile strength along other analytical characterizations using FTIR, TGA, DSC and XRD. The mechanical strength of the NFM was found to be sufficiently high than in comparison to noncrosslinked sample and PVA NFM. The internal architecture of the CL-1 by use of atomic force microscopy (AFM) revealed that there was very well formed crosslinks suitable for drug loading as well as cell proliferation. The wound healing properties of the CL-1 in mice animal model indicated the healing within 5 days as compared to the control wound. Moreover, the sample was also analysed for its ability as polymeric scaffold and no toxicity was found onto the locally applied tissue on histological investigations.     

Synthetic and Biological Studies on New Urea and Triazole Containing Cystobactamid Derivatives

Cystobactamids belong to the group of arene-based oligoamides that effectively inhibit bacterial type IIa topoisomerases. Cystobactamid 861-2 is the most active member of these antibiotics. Most amide bonds present in the cystobactamids link benzoic acids with anilines and it was found that some of these amide bonds undergo chemical and enzymatic hydrolysis, especially the one linking ring C with ring D. This work reports on the chemical synthesis and biological evaluation of thirteen new cystobactamids that still contain the methoxyaspartate hinge. However, we exchanged selected amide bonds either by the urea or the triazole groups and modified ring A in the latter case. While hydrolytic stability could be improved with these structural substitutes, the high antibacterial potency of cystobactamid 861-2 could only be preserved in selected cases. This includes derivatives, in which the urea group is positioned between rings A and B and where the triazole is found between rings C and D.     

The effect of 3D printing on the morphological and mechanical properties of polycaprolactone filament and scaffold

Three‐dimensional (3D) printing becomes an attractive technique to fabricate tissue engineering scaffolds through its high control on fabrication and repeatability using the printing parameters. This technique can be combined by the finite element method (FEM), and tissue‐specific scaffolds with desirable morphological and mechanical properties can be designed and manufactured. In this study, the influential 3D printing parameters on the morphological and mechanical properties of polycaprolactone (PCL) filament and scaffold were studied experimentally and numerically. First, the effects of printing parameters and process on the properties of extruded PCL filament were investigated. Then, using FEM, the effects of filament specifications on the overall characteristics of the scaffold were evaluated. Results showed that both the printing process in terms of resting time and remaining time and the printing parameters like pressure, printing speed, and printing path length have influenced the filament properties. In addition, both the filament diameter and elastic modulus had significant effects on the properties of scaffold especially, a 20% increase in the filament diameter caused the scaffold compressive elastic modulus to rise by around 72%. It is concluded that the printing parameters and process must be tuned very well in fabricating scaffolds with the desired morphology and mechanical property.