Total synthesis of the marine alkaloid halitulin

The structure of the strongly cytotoxic marine alkaloid halitulin (1) has been confirmed by total synthesis and its absolute configuration determined as (15S). The synthesis follows a strategy previously reported by one of us and uses an efficient preparation of the quinoline-7,8-diol unit by modified Baeyer-Villiger and Skraup reactions. The O-benzyl protecting groups were removed in the last step of the synthesis by transfer hydrogenolysis without concomitant reduction of the quinoline ring. The method can be applied for the synthesis of halitulin analogues.     

The Electrochemical Behavior of α‐Ketoglutarate at the Hanging Mercury Drop Electrode in Acidic Aqueous Solution and Its Practical Application in Environmental and Biological Samples

The voltammetric behavior of α‐ketoglutarate (α‐KG) at the hanging mercury drop electrode (HMDE) has been investigated in acetate buffer solution. Under the optimum experimental conditions (pH 4.5, 0.2 M NaAc‐HAc buffer solution), a sensitive reductive wave of α‐KG was obtained by linear scan voltammetry (LSV) and the peak potential was ?1.18 V (vs. SCE), which was an irreversible adsorption wave. The kinetic parameters of the electrode process were α=0.3 and k_s=0.72 1/s. There was a linear relationship between peak current i_{p, α‐KG} and α‐KG concentration in the range of 2×10^?6–8×10^?4 M α‐KG. The detection limit was 8×10^?7 M and the relative standard deviation was 2.0% (C_α‐KG=8×10^?4 M, n=10). Applications of the reductive wave of α‐KG for practical analysis were addressed as follows: (1) It can be used for the quantitative analysis of α‐KG in biological samples and the results agree well with those obtained from the established ultraviolet spectrophotometric method. (2) Utilizing the complexing effect between α‐KG and aluminum, a linear relationship holds between the decrease of peak current of α‐KG Δi_p and the added Al concentration Cequation/tex2gif-inf-5.gif in the range of 5.0×10^?6–2.5×10^?4 M. The detection limit was 2.2×10^?6 M and the relative standard deviation was 3.1% (Cequation/tex2gif-inf-6.gif=4×10^?5 M, n=10). It was successfully applied to the detection of aluminum in water and synthetic biological samples with satisfactory results, which were consistent with those of ICP‐AES. (3) It was also applied to study the effect of Al^III on the glutamate dehydrogenase (GDH) activity in the catalytically reaction of α‐KG+NH +NADH?L ‐glutamate+NAD⁺+H₂O by differential pulse polarography (DPP) technique. By monitoring DPP reductive currents of NAD⁺ and α‐KG, an elementary important result was found that Al could greatly affect the activity of GDH. This study could be attributed to intrinsic understanding of the aluminum's toxicity in enzyme reaction processes.     

Determination of selenium, zinc and cadmium in antidandruff shampoos by atomic spectrometry after microwave assisted sample digestion

Microwave assisted pre-treatments for atomic spectrometric determination (inductive coupled plasma-optical emission spectrometry, ICP-OES or flame atomic absorption spectrometry, FAAS) of metallic elements, usually present in antidandruff shampoos, are proposed. They are based on the digestion of the sample with HNO₃ into a closed reactor, which is irradiated at 800 W for a few minutes. Selenium was determined by ICP-OES. The limit of detection was 0.11 mg l⁻¹; the relative standard deviation (R.S.D.) for the selenium content in the samples was in the 0.6–3.6% range. The results obtained were in agreement with the label contents and the recovery of the proposed method was in the 100–106% range. Zinc and cadmium were determined by FAAS. The limit of detection for zinc determination was 0.078 mg l⁻¹; the R.S.D. for zinc contents was in the 0.8–8.6% range. A limit of detection of 0.09 mg l⁻¹ was obtained for cadmium determination; the R.S.D. for cadmium contents was in the 0.7–2.7% range. The determinations were performed after two different sample mineralization pre-treatments — dry ashing (in an electric furnace) and wet mineralization (in a microwave oven). Both methodologies provided comparable results for zinc and cadmium determination in shampoos. The proposed microwave assisted digestion procedures allow a precise and accurate determination of selenium, zinc and cadmium in commercial antidandruff shampoos, and the sample pre-treatment is less time-consuming than the classic methods.     

Comparison of purge and trap GC/MS and spectrophotometry for monitoring petroleum hydrocarbon degradation in oilfield produced waters

Results of using a field spectrophotometer and its appropriate protocols as a surrogate method for an oilfield produced water treatment process is presented. Methylene chloride extractions of the produced water before and after treatment maintained a yellow color pigment that was directly proportional to the hydrocarbon concentration. From this, an absorption spectrum and standard curve were developed. A resultant linear plot of the standard curve indicated that there is an excellent correlation (r²=0.9847) between the varying concentrations and the associated absorbance values at a wavelength of 400 nm. Total n-alkane concentration comparisons between the laboratory GC/MS analysis and the spectrophotometry analysis generated data of similar accuracy and precision at concentrations ranging from 1 to 137 mg/l (alpha=0.05). Linear comparisons between GC/MS and spectrophotometric coefficients were near unity, with the constant being near zero, with a correlation coefficient (r²) of 0.99. Based on this study, spectrophotometry is a complimentary method to GC/MS for determining total n-alkane concentrations in oilfield produced water samples.     

High throughput screening of O-glycosylation conditions

We report a novel methodology for rapid and quantitative screening of O-glycosylation reactions of application to the analysis of parallel reaction systems. Our system exploits perdeuterated benzyl (Bn-d₇) ether, and stereoselectivity and yield are evaluated by ¹H NMR and MALDI-TOF MS, respectively. This paper summarizes over 240 screenings of 1 → 3 linkage formation between glucose residues targeting the α-isomer in high yield.     

吡咯和呋喃气相质子化过程的密度泛函理论研究

Density functional theory and ab initio calculations have been used to determine structures and stabilities of the protonated aromatics species AH^＋ and AH2^2＋ （A=pyrrole, furan）. Possible mechanisms and relative energetics for protonation of pyrrole and furan by H3O^＋ and AH^＋ in the gas phase have been explored. Calculations show that the Cα-protonated species was the most stable structure for AH^＋, and the protonated AH^＋ might accommodate the second proton to yield AH2^2＋ if the free proton was available. The gas-phase H3O^＋ could protonate pyrrole and furan with significant exothermiCity and almost without barrier. The proton transfer from AH4^＋ to pyrrole and furan has a barrier ranging from 33.5 to 39.3 kJ/mol in the gas phase.     

The structure of fullerene films and their metallocene doping

Hexagonal close-packed (HCP) C₆₀ and C₇₀ films have been prepared by the Langmuir method and examined by electron microscopy and electron-diffraction analysis. It has been shown that the vacuum deposition of a C₆₀+C₇₀ mixture results in the formation of a film with small sized grains and a distorted C₆₀-HCP structure. The simultaneous deposition of C₆₀ and ferrocene results in the formation of a film with a changed morphology and an electron-diffraction pattern that contains a variable amount of ferrocene depending on the experimental conditions. The electron-diffraction pattern corresponds to the presence of the known molecular complex C₆₀[(C₅H₅)₂Fe]₂. The analogous simultaneous deposition of fullerene C₆₀ and cobaltocene results in the formation of a C₆₀ film stable in air and water, which contains carbon and cobalt (from the data of X-ray fluorescence, electron microscopy and microdiffraction). It has a different morphology and different diffraction patterns than pure C₆₀ films and, depending on the cobaltocene content (relative to that of fullerene), appears to be a fullerite film doped with various amounts of cobaltocenium fullende, which is an ionic compound.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1379–1383, August, 1994.The work was financially supported by the Russian Foundation for Basic Research (Projects 93-03-4676 and 93-03-18368).     

Free energies of transfer of complexes of the type MCl2py4 between pyridine and other solvent media

Solubility isotherms are reported for the NiCl₂·4py, MnCl₂·4py, and MnCl₂·2py solid pyridinates in a number of pyridine+diluent mixtures at 25°C. Activity coefficients of the solvent components have been derived from the total vapor pressures measured by a static method. The standard free energies of transfer for the NiCl₂py₄ and MnCl₂py₄ complexes are the same, within the experimental error, in the pyridine+aprotic diluent mixtures, while marked differences are observed in the pyridine+chloroform mixtures. Marked deviations are observed for chloroform and 1,2-dichloroethane from a correlation between the standard free energy of transfer of the complexes, on one hand, and the Hildebrand's solubility parameter of the solvent, on the other, the latter correlation being roughly valid for aprotic solvents. The deviations are tentatively ascribed to hydrogen bond formation of the type H... between the protic solvents and the coordinated pyridine molecules, enhanced by the d electron delocalization.     

基于课程标准的教学——以常见阴、阳离子的检验为例

以常见的阴、阳离子的检验为例，研究了如何实施基于标准的教学。校本教材的开发为标准、教材、教学、评价的一致性提供保障；以学生应知的和能做的驱动课堂活动；根据达成标准应有怎样的质量表现，试卷编制先于教学设计。课堂上，“教”“学”双方都明确学习目标，教师提供多种策略来满足学生多样的学习需要，如提供工具，搭建脚手架，并以“微”研究性学习的方式展开教学，给学生提供了充分的进步空间。     

Production of high melt strength polypropylene by gamma irradiation

High melt strength polypropylene (HMS-PP) has been recently developed and introduced in the market by the major international producers of polypropylene. Therefore, BRASKEM, the leading Brazilian PP producer, together with EMBRARAD, the leading Brazilian gamma irradiator, and the IPEN (Institute of Nuclear Energy and Research) worked to develop a national technology for the production of HMS-PP. One of the effective approaches to improve melt strength and extensibility is to add chain branches onto polypropylene backbone using gamma radiation. Branching and grafting result from the radical combinations during irradiation process. Crosslinking and main chain scission in the polymer structure are also obtained during this process. In this work, gamma irradiation technique was used to induce chemical changes in commercial polypropylene with two different monomers, Tri-allyl-isocyanurate (TAIC) and Tri-methylolpropane-trimethacrylate (TMPTMA), with concentration ranging from 1.5 to 5.0 mmol/100 g of polypropylene. These samples were irradiated with a ⁶⁰Co source at dose of 20 kGy. It used two different methods of HMS-PP processing. The crosslinking of modified polymers was studied by measuring gel content melt flow rate and rheological properties like melt strength and drawability. It was observed that the reaction method and the monomer type have influenced the properties. However, the concentration variation of monomer has no effect.