Flow Through Diffusion Cell Method: A Better Approach to Study Drug Release Behavior as Compared to Traditional Dissolution Test Method

Co‐polymeric hydrogels consisting of N‐vinyl‐2‐pyrrolidone (NVP) and acrylic acid (AAc) were synthesized and evaluated for release of a model drug, i.e., vitamin B₁₂. Release studies in simulated gastric fluid (pH 1.2) and intestinal fluid (pH 7.4), at 37°C, showed the hydrogels to be pH sensitive. An in vitro release study by ‘traditional dissolution test’ (TDT) showed that percent drug released from the hydrogel was nearly 8.6±2.1 and 83.2±4.8 in the media of pH 1.2 and 6.8, respectively. However, in order to incorporate in vivo GI conditions such as acidic pH and high water content in the stomach, low water content and the presence of a semi–solid mass in the large intestine, a new test model, called flow through diffusion cell (FTDC) was also used. The two approaches yielded almost different release profiles. The gels were characterized by thermogravimetric analysis and FTIR spectroscopy.     

On the Effect of Organic Substitution of Silicon Alkoxides in Poly(Vinyl Acetate) Organic-Inorganic Composites

Abstract

Organic-inorganic composites (OICs) were prepared via the in-situ polymerization of an organically (phenyl) substituted trialkoxysilane, phenyltriethoxysilane (PhTEOS), in the presence of poly(vinyl acetate) (PVAc). The mechanical reinforcement above T _g previously observed in OICs of unfunctionalized organic polymers such as PVAc with acid catalyzed in-situ polymerized tetraalkoxysilane was not observed when the tetraalkoxysilane was replaced with PhTEOS. Although both systems are optically transparent and both exhibit a high degree of hydrogen bonding between the carbonyl of PVAc and the residual hydroxyls of the silicate, the polymerization of the alkoxide is different. The tetra-functional alkoxide polymerizes to form a load-supporting silicate network, leading to a high plateau in the tensile modulus above T _g, whereas the trifunctional alkoxide reacts to form primarily low molecular weight oligomers. These increase the T _g of the PVAc but do not provide mechanical reinforcement.     

Interaction of Naproxen with Crystalline and Amorphous Methylated β-Cyclodextrin in the Liquid and Solid State

Abstract

Interactions of naproxen (NAP) with amorphous, randomly methylated β-cyclodextrin at a degree of substitution per anhydroglucose unit of 1.8 (RAMEB) and with crystalline heptakis-(2,6-di-O-methyl)-β-cyclodextrin (DIMEB) were studied in aqueous solution and in the solid state using, respectively, phase-solubility analysis (at 25 °C, 37 °C and 47 °C) and differential scanning calorimetry (DSC) supported by X-ray powder diffractometry. RAMEB and DIMEB displayed similar solubilizing and complexing abilities towards NAP, suggesting analogous inclusion modes of the drug in the host cavity in aqueous solution. Differences were instead observed in interactions in the solid state, where the amorphizing capacity of RAMEB toward NAP (evaluated by DSC) was about twice that of DIMEB at each drug-to-carrier ratio. Assuming that inclusion complexation is also involved in solid-state interactions, molecular modelling accounted for the experimental results in terms of structural features of DIMEB, i.e. the particular inwards orientation of O-6-C-8 groups of three alternate glucoses on the primary hydroxyl side which hampers a deep penetration of NAP in the DIMEB cavity in the solid state. On the contrary, no obstruction of the cavity apparently occurs with RAMEB due its noncrystalline state. The aqueous dissolution rate of NAP from NAP-RAMEB and NAP-DIMEB blends containing 0.59, 0.73, 0.85, and 0.92 mass fraction of carrier linearly increased at decreasing drug-to-carrier ratios. The improvement was 5 to 20 times (from powders) and 50 to 200 times (from discs) the dissolution rate of NAP alone for both carrier. Therefore the choice of the amorphous RAMEB in pharmaceutical formulations can be recommended mainly for economic reasons, though the anhydrous and non-hygroscopic nature of crystalline DIMEB might be of particular advantage in case of moisture sensitive formulations.     

Investigation on the dissolution of Mn ions from LiMn2O4 cathode in the application of lithium ion batteries: First principle molecular orbital method

The dissolution phenomenon of Mn ions in LiMn₂O₄ (LMO) cathode material for lithium ion batteries (LIBs) was investigated by a first principle calculation using the discrete variational Xα molecular orbital method. It was found that the oxidation number of Mn ions easily increases at high temperatures due to the empty levels of Mn 3d orbitals located in the vicinity of the Fermi energy level of LMO crystal. The changes of density of states (DOS) and Mn‐O bonding properties with doping were examined. Analysis of DOS showed that the substitution of elements with a smaller oxidation number than Mn was found effective in keeping Mn ions at higher oxidation states. From the calculation of bonding properties, the dissolution of Mn was found to be strongly correlated with the covalent nature of Mn‐O bond. Based on the results, we concluded that increasing the covalent character of Mn‐O bond is effective to minimize the dissolution of Mn ions, along with suppressing the formation of Jahn‐Teller‐active Mn³⁺ by inducing Mn ions at high oxidation state with proper selection of doping elements. © 2012 Wiley Periodicals, Inc.     

The inclusion complex of piromidic acid with dimethyl-β-cyclodextrin in aqueous solution and in the solid state

Inclusion complex formation of piromidic acid (PA) with dimethyl--cyclodextrin (DM--CD) in aqueous solution and in the solid state was confirmed by the solubility method, differential scanning calorimetry (DSC) and proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The apparent stability constant,K _c , of the complex was estimated to be 244 M^–1. The stoichiometry of the complex was given as the ratio 1:2 of PA to DM--CD. The dissolution rate of the PA/DM--CD complex was much greater than that of intact PA.Presented at the Fourth International Symposium on Inclusion Phenomena and the Third International Symposium on Cyclodextrins, Lancaster, U.K., 20–25 July 1986.     

The kinetics of zinc dissolution in nitric acid

The dissolution of zinc in 0.48–1.49M HNO₃ was studied at 15–25°C, by following simultaneously the concentration changes of the reactants (Zn and HNO₃), intermediate (HNO₂) and product (Zn²⁺) with time. Explicit mechanisms were suggested for the dissolution of zinc in nitric acid. The kinetics of the dissolution process show that it is of the first-order with respect to [Zn] and [HNO₂]. The data obtained show that the dissolution process is diffusion-controlled. The mechanism of zinc dissolution is compared with the mechanism of copper dissolution.

---

Die Kinetik der Auflösung von Zink in Salpetersäure

Zusammenfassung Die Auflösung von Zink in 0.48–1.49M HNO₃ wurde bei 15–25°C mittels gleichzeitiger Verfolgung der Konzentrationsänderungen der Reaktanden (Zn und HNO₃), des intermediären HNO₂ und des Produkts Zn²⁺ untersucht. Es wird ein Mechanismus vorgeschlagen. Die Kinetik der Auflösung ist erster Ordnung bezüglich [Zn] und [HNO₂]. Die Daten zeigen, daß der Auflösungsvorgang diffusionskontrolliert ist. Der Mechanismus der Auflösung von Zink wird mit dem der Kupferauflösung verglichen.

     

乳酸配合物(NH4)2[Sr(C3H5O3)4]的晶体结构、Hirshfeld表面分析和溶液化学性质

合成了无水乳酸配合物(NH₄)₂[Sr(C₃H₅O₃)₄]。用X射线单晶衍射仪对该配合物的晶体结构进行了表征,确定了其组成、空间结构和配位方式。绘制了配合物的Hirshfeld表面和2D指纹图,揭示了分子间的相互作用以及该配合物具有多个配位位点和较强的配位活性。根据相关的晶体数据计算出了该配合物的晶格能及其对应阴离子的摩尔体积,计算得到该配合物的晶格能为2742.9 kJ·mol^-1。用等温环境反应-溶解量热计测量了该配合物在298 K超纯水溶剂中的溶解焓。根据Pitzer电解质溶液理论,在298 K下获得了该配合物的无限稀释摩尔溶解焓△_sH_m^∞和Pitzer参数,确定该配合物的△_sH_m^∞为(114.01±0.04) kJ·mol^-1。计算了该配合物的表观相对摩尔焓(^ΦL)以及不同浓度下溶质和溶剂的相对偏摩尔焓(L₁和L₂)。最后,根据晶格能和△_sH_m^∞设计了热化学循环,并计算出了阴离子的水合焓值。热重和微商热重曲线进一步揭示了该配合物的结构。     

Nitrogen Plasma Enhanced Low Temperature Atomic Layer Deposition of Magnesium Phosphorus Oxynitride (MgPON) Solid-State Electrolytes

Solid-state batteries (SSBs) that use solid electrolytes instead of flammable liquid electrolytes have the potential to generate higher specific capacity and offer better safety. Magnesium (Mg) based SSBs with Mg metal anodes are considered to be one of the most promising energy storage candidates, because it gives high theoretical volumetric capacities of 3830 mAh cm⁻³. Here, we demonstrate an atomic layer deposition (ALD) process with a double nitrogen plasma process that successfully produces nitrogen-incorporated magnesium phosphorus oxynitride (MgPON) solid-state electrolyte (SSE) thin films at a low deposition temperature of 125 °C. The ALD MgPON SSEs exhibit an ionic conductivity of 0.36 and 1.2 μS cm⁻¹ at 450 and 500 °C, respectively. The proposed ALD strategy shows the ability of conformal deposition nitrogen-doped SSEs on pattered substrates and is attractive for using nitride ion-conducing films as protective or wetting interlayers in solid-state Mg and Li batteries.     

On-line electrolytic dissolution of solid metal samples and determination of copper in aluminium alloys by flame atomic absorption spectrometry

A flow-injection system was developed in which alloy metal samples are electrolytically dissolved and the dissolved samples are analysed by flame atomic absorption spectrometry (FAAS). The effects of electrolyte composition and electrolysis parameters on the dissolution of the sample were studied. The method was used for the determination of copper in aluminium alloys. Electrolyte solutions consisting of 0.2–1.0 M nitric acid are better than other electrolytes tested with regard to both alloy sample dissolution and determination of copper by FAAS. The peak height increases linearly with the electrolysis time or current within a certain range. The detection limit depends on the sensitivity of the detector used, and can be improved by increasing the electrolysis time or current. Generally, aluminium alloys containing 0.5–10% copper can give suitable signals for FAAS determination. The reproducibility of electrolysis and determination is about 4% for the same sampling points and 5% for different sampling points on the alloy sample.