磁性固体超强酸SO42-/ZrO2-Al2O3-Fe3O4的制备与性能研究

利用化学共沉淀法将磁性基质与固体酸组装制备磁性纳米固体超强酸催化剂，利用XRD、Raman、TG-DSC、M?ssbauer、TEM、HRTEM等手段对样品性质进行表征。结果表明：磁性基质的引入赋予固体超强酸以超顺磁性；Fe₃O₄、Al₂O₃粒子弥散在ZrO₂基质中，烧结过程中阻碍了扩散传质的进行以及晶界移动，抑制了ZrO₂晶体生长，稳定了四方晶相(T-ZrO₂)；样品粒径分布集中，平均约为32 nm；HRTEM显示T-ZrO₂晶体生长取向于(101)方向，晶面间距d(101)=0.29 nm；Hammett指示剂法测得经600 ℃焙烧后产物的酸强度H_o＜-13.8，酸强度大于浓硫酸(H_o=-11.93)。以柠檬酸三丁酯的合成作为磁性固体超强酸SO₄^2-/ZrO₂-Al₂O₃-Fe₃O₄催化剂的探针反应，结果表明外磁场的引入提高了柠檬酸的转化率。     

ADSORPTION OF 2,4-DICHLOROBENZOXYACETIC ACID ONTO HYPERCROSSLINKED RESIN MODIFIED BY PHENOLIC HYDROXYL GROUP (AM-1)

INTRODUCTIONAdsorption has been considered to be the best available technology for removing organics from water in the USSafe Drinking Water Act[1]. Due to many drawbacks of activated carbon[2-7], the most widely used adsorbent,hypercrosslinked polymeric adsorbents developed by Tsyurupa and Davankov[8] have been increasingly viewedas an alternative to activated carbon for selective removal of specific organic substances from contaminatedwater[9-12], and series of researches have been do…     

A remarkable stereoselectivity switching upon solid-state versus solution-phase enantiodifferentiating photocyclodimerization of 2-anthracenecarboxylic acid mediated by native and 3,6-anhydro-γ-cyclodextrins

The enantiodifferentiating [4+4] photocyclodimerization of anthracenecarboxylic acid (AC) mediated by native, mono- and di-3,6-anhydro-γ-cyclodextrins was investigated in both aqueous solution and solid-state. The solid-state photolyses gave inherently disfavored head-to-head photodimers in much higher chemical and optical yields than in the aqueous solution.     

A short synthesis of 4-amino-3-hydroxybutyric acid (GABOB) via allyl cyanide

4-Amino-3-hydroxybutyric acid was synthesized from allyl cyanide in four steps in an overall yield of 38%. Ultrasonically promoted epoxidation of allyl cyanide with m-chloroperoxybenzoic acid giving oxiranylacetonitrile was used as a key step.     

Vapor pressure,speciation, and chemical activities in highly concentrated sodium borate solutions at 277 and 317°C

The system H₂O-B₂O₃-Na₂O has been studied experimentally at 277 and 317°C. The activities of water and boric acid have been determined at mole ratios Na/B from 0 to 1.5, and total dissolved solids 3 to 80 weight percent. The activity of boric acid has been fitted to within experimental error using a speciation model with eight complex species. This model is consistent with the model previously published by Mesmer et al. The electrolyte properties of the liquid are modeled using the Pitzer-Simonson model of very concentrated electrolyte solutions. The calculated values of water activity agree with experiment, and the activity of NaOH and pOH have also been calculated. The potassium borate system also was briefly studied at 317°C, and is adequately described by a model with five complex species. The potassium borate liquid is more alkaline at K/B= 1 than a sodium borate liquid at the same mole ratio, but pOH in the two systems is the same at lower mole ratios.     

Microwave-accelerated derivatization processes for the determination of phenolic acids by gas chromatography-mass spectrometry

A rapid method for the derivatization of phenolic antioxidants using microwave irradiation has been developed. Six antioxidatively active phenolic components of wines and fruits, namely gallic acid, gentisic acid, vanillic acid, caffeic acid, ferulic acid and p-coumaric acid were used in the model study. The solution of phenolic acids was evaporated to dryness on a rotary evaporator followed by further drying under microwave irradiation (600 W, 30 s). The resultant residue was dissolved in pyridene and treated with bis(trimethylsilyl)acetamide while irradiated by microwave using high power for 30 s. Controlled reaction was carried out employing bis(trimethylsilyl)trifluoroacetamide under conventional heating for 30 min. The trimethylsilyl derivatives were identified and quantified on a gas chromatography/mass selective detector. The mass spectral fragmentation patterns of the derivatives obtained by microwave irradiation were identical to those prepared by heating. The yields of microwave-assisted silylation were comparable to those from conventional heating. The rsd were less than 8% for six replicates. The linearity in wine matrix was nearly perfect. This method is a useful protocol to examine the phenolic constituents in wines and agricultural products.     

过渡金属离子对HPAsMoVO杂多酸的氧化性能的影响

用H2-TPR方法研究了过渡金属离子及其含量对杂多酸-HxPAs0.2Mo10VOy的氧化性能的影响,并在固定床反应器上考察了M0.2HxPAs0.2Mo10VOy(M=Fe3 、Co2 、N i2 和Cu2 )催化剂对异丁烷选择性氧化的催化性能.研究结果表明用过渡金属离子取代杂多酸中的质子,可以在较大程度上增强杂多酸的低温氧化能力,其中Fe3 对增强杂多酸的催化活性最为明显,而Cu2 却有利于提高目的产物甲基丙烯酸的选择性.     

小肽修饰的PAMAM树枝状化合物的生物活性

合成了甘氨酸 (Gly) 天冬氨酸 (Asp)组成的肽链Gly Asp、Gly Asp Gly Asp、Gly Asp (Gly Asp) 2 .分别将天冬氨酸及上述合成的肽链引入到聚酰胺 胺型树枝状化合物 (PAMAM)的表面 .对所得化合物进行了分子模拟 ,结果表明Gly Asp (Gly Asp) 2 肽链在PAMAM表面可形成接近于 β sheet的构象 .由实验得知 ,经Asp、Gly Asp、Gly Asp Gly Asp、Gly Asp (Gly Asp) 2 修饰的PAMAM树枝状化合物对抗坏血酸还原FeⅢ 细胞色素C(cytc)的反应有干扰作用 ,导致该反应速率下降 .这说明所合成的化合物与cytc有较好的结合能力 .特别是Gly Asp (Gly Asp) 2 修饰的PAMAM ,其与cytc的结合常数为 1 6ⅹ 1 0 5.     

Chemiluminescence Determination of Benzoic Acid Using A Solid-Phase Verdigris Reactor

Benzoicacidisacommonadditiveusedwidelyasfoodpreservativeandplasticizer.Itcouldpromoteseverereactiontoallergicpopulationevenatlowconcentrationlevel1.Routinemethodsfortheassayofbenzoicacidincludeschromatographic2-6,spectrophotometry7,8,capillaryelectrophoresis9-13andelectrochemicaltitration14.Stokes15etal.monitoredairbornebenzoicacidbasedonsurface-enhancedRamanscatteringtechniques.Thereisalsoreportonamicrobialsensorusingpseudomonasforbenzoicacidandtheirderivativesinaqua16.Interestofusinglumines…     

Direct melting polycondensation and characterization of poly(ɛ-caprolactone-co-lactic acid)

A kind of biodegradable material, poly(ɛ-caprolactone-co-lactic acid) [P(CL-co-LA)] was synthesized via the direct melting polycondensation of lactic acid (LA) and ɛ-caprolactone (CL). The influences of the polycondensation time, and the catalyst type on the intrinsic viscosity of P(CL-co-LA) were also investigated. The results indicate that P(CL-co-dl-LA), with an intrinsic viscosity of 0.4733 dL/g, can be prepared by direct melting polycondensation with the molar ratio LA/CL = 3:7 at 180°C and 70 Pa for 12 h, using 0.5% (mass fraction) of SnCl₂ as the catalyst. Compared with lactide ring-opening polycondensation (ROP), the direct melting polycondensation of LA and CL is more practicable and simple. Translated from Journal of South China University of Technology, 2006, 34(7): 7–11 (in Chinese)