硅氧烷乳液聚合过程中大颗粒形成机理研究：Ⅰ.阳离子型乳液的耐电解质…

探讨了二甲基聚硅氧烷阳离子型乳液耐电解质稳定性的影响因素。结果表明，加入少量的非离子型表面活性剂与阳离子型乳化剂并用进行乳液聚合，可以保护乳液粒子，防止由于电解质引的乳液粒子的相互凝聚而形成大颗粒。     

Liquid-Crystal Based Formulations for Topical Drug Delivery

Monoolein, being a biocompatible and bioadhesive penetration enhancer that can form liquid crystalline (LC) phases, possesses remarkable characteristics for addressing drug delivery systems across the biological membrane. A range of formulations based on LC phases were investigated in this study, which includes lamellar, reverse hexagonal, and bicontinuous cubic phases along with an emulsion stabilized by LC phases. Caffeine was chosen as hydophilic model drug to evaluate in vitro release performance. The different monoolein based caffeine formulations were characterized by techniques such as polarized light microscopy, nuclear magnetic resonance (NMR) and small angle x-ray scattering (SAXS). The release experiments, performed through Franz diffusion cells, revealed that the presence of a liquid crystalline (LC) phase prevented burst release in all cases. In addition, taking into consideration that all ingredients are fully biocompatible, the creamy emulsion formulation stabilized by a hexagonal lipid LC phase can be proposed as a challenging preformulation for topical drug delivery.     

Injectable,Interconnected, High‐Porosity Macroporous Biocompatible Gelatin Scaffolds Made by Surfactant‐Free Emulsion Templating

High‐porosity interconnected, thermoresponsive macroporous hydrogels are prepared from oil‐in‐water high internal phase emulsions (HIPEs) stabilized by gelatin‐graft‐poly(N‐isopropylacrylamide). PolyHIPEs are obtained by gelling HIPEs utilizing the thermoresponsiveness of the copolymer components. PolyHIPEs properties can be controlled by varying the aqueous phase composition, internal phase volume ratio, and gelation temperature. PolyHIPEs respond to temperature changes experienced during cell seeding, allowing fibroblasts to spread, proliferate, and penetrate into the scaffold. Encapsulated cells survive ejection of cell‐laden hydrogels through a hypodermic needle. This system provides a new strategy for the fabrication of safe injectable biocompatible tissue engineering scaffolds.

     

Simultaneous Detection of Single Attoliter Droplet Collisions by Electrochemical and Electrogenerated Chemiluminescent Responses

We provide evidence of single attoliter oil droplet collisions at the surface of an ultra‐microelectrode (UME) by the observation of simultaneous electrochemical current transients (i–t curves) and electrogenerated chemiluminescent (ECL) transients in an oil/water emulsion. An emulsion system based on droplets of toluene and tri‐n‐propylamine (2:1 v/v) emulsified with an ionic liquid and suspended in an aqueous continuous phase was formed by ultrasonification. When an ECL luminophore, such as rubrene, is added to the emulsion droplet, stochastic events can be tracked by observing both the current blips from oxidation at the electrode surface and the ECL blips from the follow‐up ECL reaction, which produces light. This report provides a means of studying fundamental aspects of electrochemistry using the attoliter oil droplet and offers complementary analytical techniques for analyzing discrete collision events, size distribution of emulsion systems, and individual droplet electroactivity.     

Tailoring of High‐Order Multiple Emulsions by the Liquid–Liquid Phase Separation of Ternary Mixtures

Multiple emulsions with an “onion” topology are useful vehicles for drug delivery, biochemical assays, and templating materials. They can be assembled by ternary liquid phase separation by microfluidics, but the control over their design is limited because the mechanism for their creation is unknown. Herein we show that phase separation occurs through self‐similar cycles of mass transfer, spinodal decomposition or nucleation, and coalescence into multiple layers. Mapping out the phase diagram shows a linear relationship between the diameters of concentric layers, the slope of which depends on the initial ternary composition and the molecular weight of the surfactant. These general rules quantitatively predict the number of droplet layers (multiplicity), which we used to devise self‐assembly routes for polymer capsules and liposomes. Moreover, we extended the technique to the assembly of lipid‐stabilized droplets with ordered internal structures.     

The Compressibility of pH‐Sensitive Microgels at the Oil–Water Interface: Higher Charge Leads to Less Repulsion

pH‐responsive microgels are unique stabilizers for stimuli‐sensitive emulsions that can be broken on demand by changing the pH value. However, recent experiments have indicated that electrostatic interactions play a different role to that in conventional Pickering emulsions. The influence of charges on the interactions between microgels at the oil–water interface is now described. Compression isotherms of microgels with different charge density and architecture were determined in a Langmuir trough, and counter‐intuitive results were obtained: Charged microgels can be compressed more easily than uncharged microgels. The compressibility of microgels is thus not determined by direct Coulomb repulsion. Instead, the different swelling of the microgels in the charged and the uncharged states is proposed to be the key parameter.     

Generation of Silicone Poly‐HIPEs with Controlled Pore Sizes via Reactive Emulsion Stabilization

Macrocellular silicone polymers are obtained after solidification of the continuous phase of a poly(dimethylsiloxane) emulsion, which contains poly(ethylene glycol) drops of sub‐millimetric dimensions. Coalescence of the liquid template emulsion is prohibited by a reactive blending approach. The relationship is investigated in detail between the interfacial properties and the emulsion stability, and micro‐ and millifluidic techniques are used to generate macrocellular polymers with controlled structural properties over a wider range of cell sizes (0.2–2 mm) and volume fractions of the continuous phase (0.1%–40%). This approach could easily be transferred to a wide range of polymeric systems.

     

Poly(vinyl acetate) paints in works of art: A photochemical approach. Part 1

The photochemistry of poly(vinyl acetate), PVAc, homopolymer, of PVAc mixtures with selected pigments and fillers, and of accurate historic reproductions based on the colours prepared by Portuguese artist Joaquim Rodrigo and on those supplied by the company A Favrel was studied. The systems, applied as films, were irradiated at λ ≥ 300 nm and the changes followed by size exclusion chromatography, infrared spectroscopy, and colorimetry.PVAc as homopolymer or as an emulsion paint proved to be very stable to light, and after 5000 h of irradiation no gel fraction was observed. Φ_R (λ_irr = 313 nm) for chain scission for PVAc was determined to be 7 × 10⁻⁸. This value indicates that the mechanism/s operating when irradiating at λ ≥ 300 nm are different from those previously published with irradiation involving 254 nm. No side-group scission was observed, and main chain scission is the foremost photodegradation mechanism. Also, the metal ions present in the pigments do not affect the photochemical stability of the polymer.     

Computer-generated holograms with a commercial microfilm

We have successfully used a commercial microfilm to produce good quality two-dimensional and three-dimensional computer-generated binary holograms.