交联萘沥青的组成与结构特征

萘与硫在较低温度下交联聚合，制得了可溶性好、残炭值高、软化点较低，流动性良好的交联萘沥青。结构分析发现，此沥青分子量分布较窄，主要由三到四个萘分子交联而成，推测其反应机理，估计聚合物经萘环侧位交联成环而形成长链状硫杂环类结构。     

Preparation and properties of covalently cross-linked sulfonated copolyimide membranes containing benzimidazole groups

A series of sulfonated copolyimides containing benzimidazole groups (SPIs) were synthesized by random copolymerization of 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA), 2-(4-aminophenyl)-5-aminobenzimidazole (APABI), 4,4′-diaminodiphenyl ether-2,2′-disulfonic acid (ODADS) and 9,9-bis(4-aminophenyl)fluorene (BAPF) in m-cresol in the presence of benzoic acid and triethylamine at 180 °C for 20 h. Membranes with good mechanical properties were prepared by solution cast method. Proton exchange treatment resulted in ionic cross-linking and the membranes were further covalently cross-linked by treating them in polyphosphoric acid (PPA) at 180 °C for 6 h. The covalently cross-linked membranes displayed slightly lower ion exchange capacities (IECs) and proton conductivities than the corresponding covalently uncross-linked ones because small part of the sulfonic acid groups had been consumed during the cross-linking process. Fenton’s test (3% H₂O₂ + 3 ppm FeSO₄, 80 °C) revealed that benzimidazole groups played an important role in the radical oxidative stability of the membranes, while the cooperative effect of benzimidazole groups and covalent cross-linking led to much more significant enhancements in the radical oxidative stability of the membranes than each alone. The membrane 4 (ODADS/APABI/BAPF = 2/1/1, by mol), for example, after covalent cross-linking could maintain membrane form within 8 h measurement, which was much longer than that (3 h) before covalent cross-linking under the same conditions. The membrane 5 (ODADS/BAPF = 3/1, by mol) without benzimidazole groups, however, after covalent cross-linking started to break into pieces after 85 min measurement, which was only slightly longer than that (60 min) before cross-linking under the same conditions.     

Preparations and photophysical properties of thermally activated delayed fluorescence materials based on N-phenyl-phenothiazine-S,S-dioxide

Four compounds (TM-1～4) based on N-(4-trifluoromethylphenyl)phenothiazine-S,S-dioxide and N-[3,5-bis(trifluoromethyl)phenyl]phenothiazine-S,S-dioxide are synthesized by Buchwald-Hartwig cross coupling reaction. The effect of different substituents in acceptors on the electronic, photophysical and electrochemical properties are studied by UV–Vis, fluorescence spectroscopy, cyclic voltammetry curves and theoretical calculations. The energy gaps (ΔE_ST) between singlet excited states (S₁) and triplet excited states (T₁) of these compounds decrease by addition of one para-substituted CF₃ or two meta-substituted CF₃ on N-phenyl in order to enhance the electron-withdrawing capability of the acceptors. Small ΔE_ST of these compounds range from 0.09 eV to 0.18 eV. TM-2～4 exhibit thermally activated delayed fluorescence (TADF) characteristics with short delayed fluorescence lifetimes (τ_d) within 0.69-1.16 μs. TM-3 emits blue light with an emission wavelength of 475 nm.     

Multi-bond network hydrogels with robust mechanical and self-healable properties

Multi-bond network(MBN) which contains a single network with hierarchical cross-links is a suggested way to fabricate robust hydrogels. In order to reveal the roles of different cross-links with hierarchical bond energy in the MBN, here we fabricate poly(acrylic acid) physical hydrogels with dual bond network composed of ionic cross-links between carboxylFe3+ interactions and hydrogen bonds, and compare these dually cross-linked hydrogels with singly and ternarily cross-linked hydrogels. Simple models are employed to predict the tensile property, and the results confirm that the multi-bond network with hierarchical distribution in the bond energy of cross-links endows hydrogel with effective energy-dissipating mechanism. Moreover, the dually cross-linked MBN gels exhibit excellent mechanical properties(tensile strength up to 500 k Pa, elongation at break ~ 2400%) and complete self-healing after being kept at 50 °C for 48 h. The factors on promoting self-healing are deeply explored and the dynamic multi-bonds are regarded to trigger the self-healing along with the mutual diffusion of long polymer chains and ferric ions.     

Poly(maleic anhydride-co-acrylic acid)/poly(ethylene glycol) hydrogels with pH- and ionic-strength-responses

<正>Poly(maleic anhydride-coacrylic acid),P(MA-AA),was synthesized by the free-radical copolymerization of maleic anhydride with acrylic acid,and fast responsive pH-sensitive poly(maleic anhydride-co-acrylic acid)/polyethylene glycol,P(MA-AA)/PEG,hydrogels were prepared using PEG as macromolecular cross-linking agent.FT-IR and ~1H-NMR spectrometry were applied to characterize the structure of P(MA-AA).The influences of pH and ionic strength on the swelling behavior of P(MA-AA)/PEG hydrogels and the swelling-deswelling changes along with the repeated changes between acid and alkali conditions were studied.The results showed that there was a hundredfold difference in the swelling ratios between the conditions of acid and alkali,and the swelling capability could not be weakened after multiple swelling-deswelling cycles.The results of swelling kinetics demonstrated that the response rate of P(MA-AA)/PEG hydrogels was very fast,because the swelling transition points always occurred at 10 min.The pH-responsive hydrogels reported here might be a smart material for potentially applications in many areas,including biosensors,drug-delivery devices and tissue engineering.     

Adaptive modification of the delayed feedback control algorithm with a continuously varying time delay

We propose a simple adaptive delayed feedback control algorithm for stabilization of unstable periodic orbits with unknown periods. The state dependent time delay is varied continuously towards the period of controlled orbit according to a gradient-descent method realized through three simple ordinary differential equations. We demonstrate the efficiency of the algorithm with the Rössler and Mackey-Glass chaotic systems. The stability of the controlled orbits is proven by computation of the Lyapunov exponents of linearized equations.     

Comment on “Delayed luminescence of biological systems in terms of coherent states” [Phys. Lett. A 293 (2002) 93]

Popp and Yan [F.A. Popp, Y. Yan, Phys. Lett. A 293 (2002) 93] proposed a model for delayed luminescence based on a single time-dependent coherent state. We show that the general solution of their model corresponds to a luminescence that is a linear function of time. Therefore, their model is not compatible with experimental delayed luminescence. Moreover, the functions that they use to describe the oscillatory behaviour of delayed luminescence are not solutions of the coupling equations to be solved.     

Global exponential synchronization of nonlinear time-delay Lur’e systems via delayed impulsive control

This paper is concerned with the global exponential synchronization problem of two identical nonlinear time-delay Lur’e systems via delayed impulsive control. Some novel impulsive synchronization criteria are obtained by introducing a discontinuous Lyapunov function and by using the Lyapunov–Razumikhin technique, which are expressed in forms of linear matrix inequalities. The derived criteria reveal the effects of impulsive input delays and impulsive intervals on the stability of synchronization error systems. Then, sufficient conditions on the existence of a delayed impulsive controller are derived by employing these newly-obtained synchronization criteria. Additionally, some synchronization criteria for two identical time-delay Lur’e systems with impulsive effects are presented by using delayed continuous feedback control. The synchronization criteria via delayed continuous feedback control can deal with the case when the impulsive control strategy fails to synchronize two identical impulsive time-delay Lur’e systems. Three numerical examples are provided to illustrate the efficiency of the obtained results.     

Exponential stability analysis of impulsive stochastic functional differential systems with delayed impulses

This paper is concerned with the exponential stability analysis of impulsive stochastic functional differential systems with delayed impulses. Although the stability of impulsive stochastic functional differential systems have received considerable attention. However, relatively few works are concerned with the stability of systems with delayed impulses and our aim here is mainly to close the gap. Based on the Lyapunov functions and Razumikhin techniques, some exponential stability criteria are derived, which show that the system will stable if the impulses’ frequency and amplitude are suitably related to the increase or decrease of the continuous flows. The obtained results improve and complement ones from some recent works. Three examples are discussed to illustrate the effectiveness and the advantages of the results obtained.     

蒿甲醚缓释片体外释放研究

目的:建立蒿甲醚缓释片体外释放的含量测定方法,并对其进行体外释放考察。方法:以释放介质作为酸消解溶剂,用酸消解间接紫外分光光度法测定片剂在释放过程中的累计百分释放度;浆法考察片剂的体外释放。结果:优选了最佳酸消解条件,并确定了片剂体外释放含量测定方法:蒿甲醚缓释片2h,5h,10h的体外累计百分释放度分别为25%,60%,85%;在诸多因素中离子强度是影响缓释片释放较灵敏的因素。结论:方法准确、快速、可行,适于体外释放实验样品量大的要求;体外实验表明蒿甲醚缓释片具有比普通片明显的缓释效果。