Some Aspects of Time-Reversal in Chemical Kinetics

Chemical kinetics govern the dynamics of chemical systems leading towards chemical equilibrium. There are several general properties of the dynamics of chemical reactions such as the existence of disparate time scales and the fact that most time scales are dissipative. This causes a transient relaxation to lower dimensional attracting manifolds in composition space. In this work, we discuss this behavior and investigate how a time reversal effects this behavior. For this, both macroscopic chemical systems as well as microscopic chemical systems (elementary reactions) are considered.     

石墨毡载纳米δ-MnO2高性能除铵净水材料研究

首先制备了α-MnO₂纳米花簇、β-MnO₂纳米针和δ-MnO₂微米颗粒三种不同晶型的MnO₂粉末材料,对其结构、形貌及吸附除铵能力进行了表征和测试.结果表明,层间距（7.2Å）大于NH₄⁺直径（2.96Å）和水合NH₄⁺直径（6.62Å）的δ-MnO₂相比其他两种晶型的MnO₂有更高的NH₄⁺吸附量;接着研究采用KMnO₄原位氧化还原法在石墨毡（GF）上直接生长超薄δ-MnO₂纳米片（MnO₂NPs）阵列构筑了石墨毡载纳米MnO₂（MnO₂NPs/GF）多级结构材料,制备简单,无须成型造粒就可直接用作除铵净水材料,研究结果表明,MnO₂NPs/GF不仅具有较高的吸附量（15 mg·g^－1）与良好的选择性,同时还展现了优异的快速吸附和稳定的循环使用性能.MnO₂NPs/GF对水中NH₄⁺的吸附符合准二级动力学模型,其吸附等温线符合Langmuir吸附等温式,是吸附-离子交换法除铵的理想材料.     

强流电子束泵浦XeCl准分子激光动力学模型

强流电子束泵浦XeCl准分子激光动力学模型由三部分组成,即电子束能量沉积的计算;电子温度、电子反应速率的计算和化学/激光动力学。这个模型可以准确地预报小信号增益、吸收等激光特征量的时间变化规律。 该模型是在文献[1]、[2]、[3]报导的动力学模型的基础上提出的。采用四阶龙格_库塔法在VAX—11/780机器上进行数值求解。 计算给出XeCl准分子激光反应过程中各种粒子浓度、小信号增益、吸收、输出光强、激发速率以及平均电子能量随时间的变化规律。计算结果表明本征效率是激发速率,电流密度和工作气体(Ne/Xe/HCl)的各分压比的函数。 该模型可为高功率准分子激光器的研制提供设计参数和最佳实验条件。     

Fibrinogen adsorption onto 316L stainless steel, Nitinol and titanium

Fibrinogen adsorption onto mechanically polished biomedical grade 316L stainless steel (316LSS), nickel titanium alloy (Nitinol) and commercially pure titanium (CpTi) surfaces were studied by measurements of adsorption isotherms and adsorption kinetics using an ex-situ wavelength dispersive spectroscopy technique (WDS). Surface composition, roughness and wettability of these materials were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and water contact angle (WCA) measurements. Adsorption isotherm results showed that surface protein concentration on these materials increased with increasing concentration of fibrinogen in phosphate buffer solution. The fibrinogen adsorption isotherms were modeled by both the monolayer Langmuir isotherm and the multilayer Brunauer-Emmett-Teller (BET) isotherm. The results strongly suggest that fibrinogen forms multilayer structures on these materials when the concentration in solution is high. Complementary measurements on the absorbed fibrinogen films by spectroscopic ellipsometry (SE) support this view.     

Palladium island growth on Ni(111) Stochastic classical trajectory — ghost atom calculations

We generalize previous stochastic classical trajectory-ghost atom calculations for describing palladium deposition onto the Ni(111) surface between 0.1 and 0.5 monolayers. The growth evolves through two-dimensional islands. The islands are formed following the downward funneling mechanism. Surface temperature does not affect the island growth.     

化学气相沉积法制备大面积二维材料薄膜:方法与机制

近年来,二维层状材料由于其丰富的材料体系和独特的物理化学性质而受到人们的广泛关注.后摩尔时代要求器件高度集成化,大面积、高质量的二维材料可以保证器件中结构和电子性能的连续性.要实现二维材料工业级别的规模化生产,样品的可控制备是其前提.化学气相沉积是满足上述要求的一种强有力的方法,已广泛应用于二维材料及其复合结构的生长制...     

Applications of ultrasound to enhance fluidized bed drying of Ascophyllum Nodosum: Drying kinetics and product quality assessment

In this study, ultrasound either as a pretreatment technique or as an integrated technique was employed to enhance fluidized bed drying of Ascophyllum nodosum, and drying kinetics and dried product quality were assessed. In order to compare technology efficiency and dried product qualities, oven drying and fluidized bed drying (FBD) were employed. The novel drying methods included airborne ultrasound-assisted fluidized bed drying (AUA), ultrasound pre-treatment followed by FBD (USP), and hot water blanching pre-treatment followed byFBD (HWB). Six drying kinetics models were used to describe the drying curves, among which the Page model was the best in fitting USP and AUA. Model by Millidi et al. was employed to describe HWB. Airborne ultrasound in AUA did not reduce energy consumption or drying time, but retained total phenolic content (TPC) as well as colour, and exhibited the highest yield among the novel drying methods. USP and HWB showed lower energy consumption and drying time considerably, but the TPC was the lowest among the studied methods. At the same time, USP dried product exhibited the lowest a_w, followed by HWB and then AUA. This studyalso demonstrated that FBD could be a very practical drying method on Irish brown seaweed, and ultrasound-assisted drying methods may have potential developments in Irish brown seaweed drying process.     

Effect of ultrasound on the preparation of soy protein isolate-maltodextrin embedded hemp seed oil microcapsules and the establishment of oxidation kinetics models

In this study, microcapsules were prepared by spray drying and embedding hemp seed oil (HSO) with soy protein isolate (SPI) and maltodextrin (MD) as wall materials. The effect of ultrasonic power on the microstructure and characteristics of the composite emulsion and microcapsules was studied. Studies have shown that ultrasonic power has a significant impact on the stability of composite emulsions. The particle size of the composite emulsion after 450 W ultrasonic treatment was significantly lower than the particle size of the emulsion without the ultrasonic treatment. Through fluorescence microscopy observation, HSO was found to be successfully embedded in the wall materials to form an oil/water (O/W) composite emulsion. The spray-dried microcapsules showed a smooth spherical structure through scanning electron microscopy (SEM), and the particle size was 10.7 μm at 450 W. Fourier transform infrared (FTIR) spectroscopy analysis found that ultrasonic treatment would increase the degree of covalent bonding of the SPI-MD complex to a certain extent, thereby improving the stability and embedding effect of the microcapsules. Finally, oxidation kinetics models of HSO and HSO microcapsules were constructed and verified. The zero-order model of HSO microcapsules was found to have a higher degree of fit; after verification, the model can better reflect the quality changes of HSO microcapsules during storage.     

A rapid,spatially dispersive frequency comb spectrograph aimed at gas phase chemical reaction kinetics

This New Views article will highlight some recent advances in high sensitivity gas detection using direct infrared absorption frequency comb laser spectroscopy, with a focus on frequency comb use in chemical reaction kinetics and our own contribution to this field. Our recently implemented detection technique uses a combination of a 12.9?GHz free spectral range virtually imaged phased array and diffraction grating to spatially disperse the mid-infrared frequency comb onto a camera. Individual frequencies or ‘comb teeth’ of a 250?MHz repetition-rate frequency comb are able to be resolved. High molecular sensitivity is achieved by increasing the interaction path length using a Herriott multipass cell. High spectral resolution, broadband spectral coverage, and high molecular sensitivity are all achieved on an adjustable 1–50 µs timescale, making this frequency comb apparatus ideal for measuring chemical reaction kinetics where multiple absorbing species can be monitored simultaneously. This New Views article will also discuss some of the challenges and decisions that chemists might face in implementing this advanced physics technology in their own laboratory.

Spatially dispersed 250 MHz mid-infrared frequency comb laser, with absorption of some frequencies by a dilute sample of methane.     

一种生物柴油代用品在HZSM-5分子筛催化剂上的催化热解

为了深入了解生物柴油在ZSM-5沸石上的催化反应机理,在常压的流动反应器中进行了生物柴油代用品丁酸甲酯在氢型ZSM-5(HZSM-5)催化剂上的热解和催化热解. 热解产物使用气相色谱-质谱法定性和定量测量. 动力学模型和实验表明,气相中氢提取反应是热解过程中丁酸甲酯分解的主要途径,但在HZSM-5上,丁酸甲酯则主要通过解离生成烯酮和甲醇消耗;与无催化反应相比,丁酸甲酯在HZSM-5上的初始分解温度降低了约300 K. 并且通过Arrhenius方程获得了在催化热解和均相热解条件下丁酸甲酯消耗的表观活化能. 明显降低的表观活化能证实了HZSM-5对丁酸甲酯热解的催化性能. 此外催化剂的活化温度对HZSM-5的某些催化性能具有一定的影响. 该研究对进一步的实际生物柴油燃料的催化燃烧具有一定的指导意义.