Inhibition of two Cu(II) and Mn(II) coordination polymers on the surgical site infections by inhibiting the bacterial biofilm formation

Within this work, two novel Cu(II) and Mn(II)-based coordination polymers (CPs) along with chemical compositions of {[Cu₂(L¹)(1,4-NDC)₂]·3H₂O}_n (1, 1,4-H₂NDC = Naphthalene-1,4-dicarboxylic acid, L¹ ​= ​di(1H-imidazole-1-yl)methane) and [Mn₃(L²)₂(H₂O)₂(1,4-NDC)₂]_n (2, L² ​= ​1,4-di(1H-imidazole-1-yl)benzene) have been completed in success via related metal salts reaction with 1,4-H₂NDC ligand in existence of various N-donor co-ligands. We discovered its application values on the surgical site infections (SSI) along with corresponding mechanism in the interim. We evaluated inflammatory cytokines released into the urine through ELISA detection kit after compound treatment. Then, we discovered the inhibitory effect of compound on the bacterial biofilm formation via real time RT-PCR.     

纳米二硫化钼的掺杂及催化电解水产氢的研究进展

电催化水分解制氢是可以形成闭环的生产过程, 起始原料与副产物均为水、 过程清洁无污染, 是极具希望的产氢策略. 目前制约其发展的瓶颈之一是价格昂贵的Pt基贵金属催化剂. 为推动电催化分解水制氢的普及, 亟待开发低成本非贵金属催化剂. 在众多备选非贵金属催化材料中, 纳米层状结构二硫化钼(MoS₂)因催化效果可期、 价格低而获得了广泛关注. 然而, 通常条件下易于获得的层状结构2H相MoS₂大面积的基面部分显示惰性, 仅在片层边缘处存在少量活性位点, 且导电性较差, 因而尚不能替代Pt基催化剂, 而如何增加其活性位点数量和提高其导电性成为亟待解决的问题; 另一方面, 1T相MoS₂虽然活性高、 导电性好, 但却存在制备困难及稳定性差的问题. 鉴于此, 研究者通过对纳米MoS₂进行掺杂改性实现了其活性与稳定性的有效提升. 本文对非贵金属纳米MoS₂催化剂掺杂改性的方法、 机理及其电催化水解制氢性能的相关研究进行了总结与讨论. 作为典型的非贵金属电解水析氢催化剂, MoS₂具有巨大发展潜力, 本文能够对相关非贵金属催化剂的研发提供有益的参考.     

FER分子筛中铝原子的受限落位

分子筛是一类具有规则孔道或笼状结构的多孔材料,因其独特的结构和可调的酸性而广泛用于石油化工、精细化学品合成、现代煤化工等诸多行业.2006年Iglesia等在具有8元环孔道结构/侧口袋的FER和MOR分子筛上实现了无卤素添加、无贵金属存在条件下,由二甲醚羰基化合成乙酸甲酯的反应.乙酸甲酯通过进一步加氢可实现煤基乙醇的绿色生产.MOR分子筛通常具有较高的催化活性,但失活迅速;FER分子筛表现出良好的催化稳定性,但活性较低.如何在保证FER分子筛稳定性的前提下,进一步提升其羰基化活性是目前研究的热点.前期理论和实验研究发现,二甲醚羰基化反应活性与分子筛8元环孔道中的Br?nsted酸位密度存在正相关.因此,通过优化合成条件,选择性调控铝原子分布在"ferrierite"笼中,可以提高FER分子筛的羰基化反应活性.尽管研究者已在调节FER分子筛铝分布方面进行了大量研究,但对于不同T位上Al原子的精准识别以及对应Br?nsted酸位的可接触性还缺少系统和深入的认识.本文选取了几种代表性模板剂,分别在碱性和含氟体系下制备了系列FER分子筛样品,利用Rietveld精修和模拟退火算法,在原子水平揭示了模板剂种类以及合成介质变化对Al原子在不同T位分布的影响,并结合二甲醚羰基化反应进行了结构和性能的关联.首先选取不同尺寸大小的环状胺(环己胺、哌啶、吡啶、吡咯烷)和链状胺(乙二胺)合成了具有相似形貌、孔结构、酸密度的系列FER分子筛样品.以CHA-Na-FER为例,PXRD精修结果显示,Na+(平衡35％的骨架负电荷)分布在10元环孔道中与O1形成氢键,质子化的环己胺分布在"ferrierite"笼中,并且环己胺上的N与O3形成氢键.这说明与O1相连的T3位以及与O3相连的T1位都有可能是Al富集的位置.为了进一步验证该结论,本文还精修了吸附探针分子吡啶的样品CHA-Na-FER-Py-60h.原粉以及吸附吡啶样品的精修结果表明,T1位和T3位是样品中铝富集的位置.随后,运用相同方法研究了Py-Na-FER,PI-Na-FER,En-Na-FER和Pyrr-HF-FER样品中的Al落位,发现T1/T3位均是样品中Al富集的位置.此外,理论计算结果表明T1/T3位上Al原子的取代能较低,说明Al优先取代T1/T3位上的Si,这与精修结果相一致.前期理论模拟结果表明,FER分子筛中T2-O5和T4-O7位点的CO插入反应能垒较低,是二甲醚羰基化反应的活性位.本文吡啶吸附实验、热重分析以及PXRD精修结果表明,FER分子筛中大部分Al富集在T1/T3位,与T2/T4位相关的Br?nsted酸约占18％～30％.最后,对各样品进行了二甲醚羰基化反应评价,结果显示PI-Na-FER,Py-Na-FER,En-Na-FER和CHA-Na-FER催化剂的乙酸甲酯生成速率相近,约为0.10 mol/(mol H+?h).Pyrr-HF-FER催化剂的乙酸甲酯生成速率最高,可达到0.16 mol/(mol H+?h),这可能是由于Pyrr-HF-FER催化剂具有更多T2/T4位相关的Br?nsted酸.虽然Pyrr-HF-FER催化剂的乙酸甲酯生成速率较其他四个催化剂有一定提升,但其仍远低于MOR分子筛上乙酸甲酯生成速率(0.40 mol/(mol H+·h)).综上,有机模板剂的选择与合成介质的改变对FER分子筛中Al分布的调控作用是有限的,即Al原子总是优先分布于T1/T3位.而与T1和T3位相关的Br?nsted酸位不是二甲醚羰基化反应的活性位点.因此与MOR相比,FER分子筛在二甲醚羰基化反应中表现出较低的催化活性.     

Toward automatic evaluation of defect detectability in infrared images of composites and honeycomb structures

Non-destructive testing (NDT) refers to inspection methods employed to assess a material specimen without impairing its future usefulness. An important type of these methods is infrared (IR) for NDT (IRNDT), which employs the heat emitted by bodies/objects to rapidly and noninvasively inspect wide surfaces and to find specific defects such as delaminations, cracks, voids, and discontinuities in materials. Current advancements in sensor technology for IRNDT generate great amounts of image sequences. These data require further processing to determine the integrity of objects. Processing techniques for IRNDT data implicitly looks for defect visibility enhancement. Commonly, IRNDT community employs signal to noise ratio (SNR) to measure defect visibility. Nonetheless, current applications of SNR are local, thereby overseeing spatial information, and depend on a-priori knowledge of defect’s location. In this paper, we present a general framework to assess defect detectability based on SNR maps derived from processed IR images. The joint use of image segmentation procedures along with algorithms for filling regions of interest (ROI) estimates a reference background to compute SNR maps. Our main contributions are: (i) a method to compute SNR maps that takes into account spatial variation and are independent of a-priori knowledge of defect location in the sample, (ii) spatial background analysis in processed images, and (iii) semi-automatic calculation of segmentation algorithm parameters. We test our approach in carbon fiber and honeycomb samples with complex geometries and defects with different sizes and depths.     

Effects of junction defect healing in Germanium n-MOSFET through thermal annealing

In this paper, the impact of junction defect healing through thermal annealing in Ge n-metal-oxide-semiconductor field-effect transistors (MOSFETs) is thoroughly investigated. Germanium (Ge) is strongly affected by the presence of point defects within the crystal, which is the source of leakage current and low frequency noise. For MOSFET applications, these defects at the junction of the source and drain area are created by ion implantation. However, these can be significantly reduced by proper thermal treatment. Here, the effect of defect healing is investigated and presented through current–voltage characteristics of a n⁺/p diode and MOSFET I_D-V_G measurement, and secondary ion mass spectroscopy (SIMS).     

Detection of oxygen addition peaks for terpendole E and related indole–diterpene alkaloids in a positive‐mode ESI‐MS

This report describes that a regular positive electrospray ionization mass spectrometry (MS) analysis of terpendoles often causes unexpected oxygen additions to form [M + H + O]⁺ and [M + H + 2O]⁺, which might be a troublesome in the characterization of new natural analogues. The intensities of [M + H + O]⁺ and [M + H + 2O]⁺ among terpendoles were unpredictable and fluctuated largely. Simple electrochemical oxidation in electrospray ionization was insufficient to explain the phenomenon. So we studied factors to form [M + H + O]⁺ and [M + H + 2O]⁺ using terpendole E and natural terpendoles together with some model indole alkaloids. Similar oxygen addition was observed for 1,2,3,4‐tetrahydrocyclopent[b]indole, which is corresponding to the substructure of terpendole E. In tandem MS experiments, a major fragment ion at m/z 130 from protonated terpendole E was assigned to the substructure containing indole. When the [M + H + O]⁺ was selected as a precursor ion, the ion shifted to m/z 146. The same 16 Da shift of fragments was also observed for 1,2,3,4‐tetrahydrocyclopent[b]indole, indicating that the oxygen addition of terpendole E took place at the indole portion. However, the oxygen addition was absent for some terpendoles, even whose structure resembles terpendole E. The breakdown curves characterized the tandem MS features of terpendoles. Preferential dissociation into m/z 130 suggested the protonation tendency at the indole site. Terpendoles that are preferentially protonated at indole tend to form oxygen addition peaks, suggesting that the protonation feature contributes to the oxygen additions in some degrees. © 2014 The Authors. Journal of Mass Spectrometry published by John Wiley & Sons, Ltd.     

Nickel‐Catalyzed Site‐Selective Amidation of Unactivated C(sp3)H Bonds

Intramolecular dehydrogenative cyclization of aliphatic amides was achieved on unactivated sp³ carbon atoms by a nickel‐catalyzed C?H bond functionalization process with the assistance of a bidentate directing group. The reaction favors the C?H bonds of β‐methyl groups over the γ‐methyl or β‐methylene groups. Additionally, a predominant preference for the β‐methyl C?H bonds over the aromatic sp² C?H bonds was observed. Moreover, this process also allows for the effective functionalization of benzylic secondary sp³ C?H bonds.     

金红石相TiO_2纳米棒的氢化处理及其光催化活性

以钛酸四丁酯为钛源,通过盐酸调制的水热法制备出了具有棒状结构的金红石相纳米TiO2,并进一步进行高温氢化处理.采用X射线衍射(XRD),透射电镜(TEM),紫外-可见-近红外漫反射(UV-Vis-NIR DRS),电子顺磁共振(EPR)和表面光伏(SPS)等测试手段对样品进行表征,以气相乙醛和液相苯酚为目标污染物考察催化剂的光催化活性.结果表明:随着高温氢化处理时间的延长,TiO2样品的可见光吸收逐渐增强,其颜色逐渐由白色转变成灰色,这主要与引入的Ti3+/氧空位缺陷有关.表面光电压谱和羟基自由基测试表明,适当时间的氢化处理有利于光生电荷的分离.在光催化氧化降解气相乙醛和液相苯酚过程中,经适当时间氢化处理的样品表现出高的可见光催化活性.并且可见光催化活性的规律与紫外光下的是一致的.这是因为氢化处理后在导带底下方引入了缺陷能级,拓展了可见光响应.过度的氢化处理会在TiO2导带下方引入较低的缺陷能级,使光生电荷的复合加剧,导致光催化活性降低.     

Facile CH Bond Formation by Reductive Elimination at a Dinuclear Metal Site

The electronically unsaturated dirhenium complex [Re₂(CO)₈(µ‐AuPPh₃)(µ‐Ph)] ( 1 ) was obtained from the reaction of [Re₂(CO)₈{µ‐η²‐C(H)?C(H)nBu}(µ‐H)] with [Au(PPh₃)Ph]. The bridging {AuPPh₃} group was replaced by a bridging hydrido ligand to yield the unsaturated dirhenium complex [Re₂(CO)₈(µ‐H)(µ‐Ph)] ( 2 ) by reaction of 1 with HSnPh₃. Compound 2 reductively eliminates benzene upon addition of NCMe at 25 °C. The electronic structure of 2 and the mechanism of the reductive elimination of the benzene molecule in its reaction with NCMe were investigated by DFT computational analyses.     

一种经氟化和热处理在双壁碳纳米管上生成缺陷的方法(英文)

Nanoscale defects in the outer tube to preserve the electrical and optical features of the inner tube can be engineered to exploit the intrinsic properties of double walled carbon nanotubes (DWCNTs) for various promising applications. We demonstrated a selective way to make defects in the outer tube by the fluorination of DWCNTs followed by the thermal detachment of the F atoms at 1000 °C in argon. Fluorinated DWCNTs with different amounts of F atoms were prepared by reacting with fluorine gas at 25, 200, and 400 °C that gave the stoichiometry of CF0.20, CF0.30, and CF0.43, respectively. At the three different temperatures used, we observed preservation of the coaxial morphology in the fluorinated DWCNTs. For the DWCNTs fluorinated at 25 and 200 °C, the strong radial breathing modes (RBMs) of the inner tube and weakened RBMs of the outer tube indicated selective fluorine attachment onto the outer tube. However, the disappearance of the RBMs in the Raman spectrum of the DWCNTs fluorinated at 400 °C showed the introduction of F atoms onto both inner and outer tubes. There was no significant change in the morphology and optical properties when the DWCNTs fluorinated at 25 and 200 °C were thermally treated at 1000 °C in argon. However, in the case of the DWCNTs fluorinated at 400 °C, the recovery of strong RBMs from the inner tube and weakened RBMs from the outer tube indicated the selective introduction of substantial defects on the outer tube while preserving the original tubular shape. The thermal detachment of F atoms from fluorinated DWCNTs is an efficient way to make highly defective outer tubes for preserving the electrical conduction and optical activity of the inner tubes.