Analysis and design of electromagnetic band gap structures with stratified and inhomogeneous media

In this study, a generalized and easy to use method based on Hill's equation and chain matrix concept is used to analyze the electromagnetic wave propagation in stratified dielectric and inhomogeneous media with arbitrary profiles.Numerical simulations are performed to compute the reflection and transmission of several Electromagnetic Bandgap (EBG) structures for various permittivity profiles and given polarization as well as incidence angles of driving fields.Multilayer structures are analyzed and optimized to enhance their selectivity performances. Obtained results agree excellently well with other published data.     

Roller bearing acoustic signature extraction by wavelet packet transform,applications in fault detection and size estimation

Continuous online monitoring of rotating machines is necessary to assess real-time health conditions so as to enable early detection of operation problems and thus reduce the possibility of downtime. Rolling element bearings are crucial parts of many machines and there has been an increasing demand to find effective and reliable health monitoring technique and advanced signal processing to detect and diagnose the size and location of incipient defects. Condition monitoring of rolling element bearings, comprises four main stages which are, statistical analysis, fault diagnostics, defect size calculation, and prognostics. In this paper the effect of defect size, operating speed, and loading conditions on statistical parameters of acoustic emission (AE) signals, using design of experiment method (DOE), have been investigated to select the most sensitive parameters for diagnosing incipient faults and defect growth on rolling element bearings. A modified and effective signal processing algorithm is designed to diagnose localized defects on rolling element bearings components under different operating speeds, loadings, and defect sizes. The algorithm is based on optimizing the ratio of Kurtosis and Shannon entropy to obtain the optimal band pass filter utilizing wavelet packet transform (WPT) and envelope detection. Results show the superiority of the developed algorithm and its effectiveness in extracting bearing characteristic frequencies from the raw acoustic emission signals masked by background noise under different operating conditions. To experimentally measure the defect size on rolling element bearings using acoustic emission technique, the proposed method along with spectrum of squared Hilbert transform are performed under different rotating speeds, loading conditions, and defect sizes to measure the time difference between the double AE impulses. Measurement results show the power of the proposed method for experimentally measuring size of different fault shapes using acoustic emission signals.     

等价电子数组元Heusler合金Fe_2RuSi中的原子占位

对等价电子数组元Heusler合金Fe_2RuSi的原子占位、电子结构与磁性进行了理论与实验研究.第一性原理计算表明,虽然Fe_2RuSi中Fe,Ru均有8个价电子,但是Ru仍表现出强烈的占据A,C晶位倾向.基态总能最低的是Fe与Ru分别占据A,C晶位的XA结构,次低的是Fe,Ru在A,C位混乱占位的L2_1B结构,且两者能量差很小.这说明决定Heusler合金中过渡族原子占位的因素除价电子数以外还可能有原子半径和共价杂化作用等.态密度和差分电荷密度计算表明Heusler合金中主族元素与最近邻过渡族元素之间的p-d共价杂化对Heusler合金的占位有明显影响,在XA结构中Ru与Si和Fe(B)之间都存在明显的杂化作用,而在高能的L2_1结构中,Si与最近邻的Fe杂化作用相当弱.XRD测试表明在室温Fe_2RuSi存在A,C位之间的Fe-Ru反占位,形成了能量次高的L21B结构,这主要来自于混合熵对自由能的贡献及其引起的原子自发混乱占位.在5 K下Fe_2RuSi的饱和磁矩为4.87μB/f.u.,与计算值符合得相当好.     

基于光纤光栅传感的金属薄板超声探测

搭建了光纤光栅检测超声应力波系统,并阐述其工作原理,以动态应变与光纤光栅中心波长漂移量间关系为基础,推导得出输出电压与板中应变成线性关系.采用超声信号发生器发射28kHz的脉冲信号激励超声振子,通过有机玻璃楔形块将激励传递至5052铝合金薄板产生超声应力波,并利用光纤光栅应变传感器对其进行探测.在板上开一98mm长裂缝,测得超声应力波中出现新的波包,通过计算损伤前后新增波包到来的时间差确定裂缝位置,所测结果与实际位置偏差为2.7mm.该实验表明光纤光栅可代替超声探头来实现对低频超声波的探测.     

稀土金属间化合物RFe2Zn20-xInx的结构属性研究

RFe₂Zn₂₀（R代表稀土元素）型稀土金属间化合物因其低稀土含量和良好的铁磁性,已成为铁磁材料的研究热点之一.添加第四组元对该系列化合物的晶体结构和材料性能会产生一定影响.利用晶格反演方法获得了一系列有效的原子间相互作用势,对三元RFe₂Zn₂₀和四元RFe₂Zn_20-xIn_x化合物进行原子级模拟计算.研究表明,随着稀土元素原子量的增加,三元体系的晶格参数和体积呈线性下降,第四组元引入与否对该线性关系无直接影响.第四组元In替代Zn时,择优占据16c晶位,占满16c后选择占据96g晶位,始终不占据48f晶位.择优占位的结论符合实验观测,并与晶格反演势分析的结果一致. 关键词： 原子间相互作用势 择优占位 晶体结构     

Site Preference Model for Hyperfine Impurities in Compounds

A thermodynamic model for site preferences of solute atoms in ordered binary phases is applied in this paper for substitutional and interstitial sites of the Cu₃Au, or L1₂, structure. Site preferences are found to depend on formation energies of combinations of elementary point defects and on energies for transfer of solutes among different sites. The composition dependence in compounds having a wide phase field is examined in detail. A phenomenology of site preference behavior is outlined for regular lattice sites as well as for non-lattice sites such as grain boundaries. This revised version was published online in September 2006 with corrections to the Cover Date.     

A Mössbauer study of hyperfine interaction in the systems Co x Mn3−x−y Fe y O4 and Ni x Mn3−x−y Fe y O4

A Mössbauer study of systems Co _x Mn_3?x?y Fe _y O₄ and Ni _x Mn_3?x?y Fe _y O₄ for values ofx=0·1, 0·5, 1·0 andy ranging from 0·1 to 2·0 in steps of 0·2 have been made. At room temperature samples fory values ranging in between 0·1 to 0·5 exhibit paramagnetic behaviour while all spectra for values ofy between 0·6 to 0·8 show relaxation effects. Well-defined hyperfine Zeeman spectra are observed for all the samples withy>0·8 and resolved in two sextets corresponding to octahedral and tetrahedral site symmetries and a central doublet probably due to the presence of super-paramagnetic particles in the system. The hyperfine field at⁵⁷Fe nucleus reduces with decreasing iron cobalt and nickel concentration. These observations have been explained in terms of site preference of cations and exchange interactions.     

Cellular automata approach to site percolation on ℤ2. A numerical study

We present a cellular automata model as a new approach to Bernoulli site percolation on the square lattice. A new macroscopic quantity is defined and numerically computed at each level step of the automata dynamics. Its limit manifests a critical behavior at a value of the site occupancy probability quite close to those obtained for site percolation on ² with the best-known numerical methods.     

离焦散斑错位干涉术的逐点滤波分析与应用

通过相关计算,分析了离焦散斑错位干涉术的逐步滤波方法,得到了杨氏条纹的形成及分布特性。讨论了逐点滤波法的实用意义并给出了在缺陷检测中的应用实例。     

青海省宗教场所旅游资源的空间格局及影响因素研究

青海省宗教发展历史悠久,宗教旅游资源丰富,宗教场所的空间分布特征对青海省区域旅游格局有重要影响.对青海省宗教场所旅游资源进行了统计,分别从空间分布模式、差异性、密度等方面采用最邻近指数、地理集中指数、洛伦茨曲线、核密度方法对其空间格局特征进行了定量分析,并利用空间回归分析法探讨了其分布与海拔、坡度、交通、水系等因素的关系.结果表明：青海省宗教场所旅游资源呈"东多西少"的集聚分布态势,空间差异显著,旅游资源集中在青海省11%地区;空间分布密度呈由东向西辐射（型）的分布趋势;空间回归分析结果显示,在地势平坦、水资源丰富、交通便捷的地区宗教场所旅游资源较丰富.