富勒烯吡咯烷衍生物的应用研究进展

综述了近几年来富勒烯吡咯烷衍生物的应用研究,着重从生物活性、分子磁性和光电材料等几个方面介绍了富勒烯吡咯烷衍生物研究的最新进展。参考文献54篇。     

STRUCTURE, MOLECULAR WEIGHT AND BIOACTIVITIES OF (1→3)-β-D- GLUCANS AND ITS SULFATED DERIVATIVES FROM FOUR KINDS OF LENTINUS EDODES

Lentinan samples, (1→3)-β-D-glucans containing 4.6-15.2 wt% proteins, coded as L-I1, L-I2, L-I3 and L-I4 (L-I)were isolated from four kinds of Lentinus edodes. These glucans were treated with acetone to remove the protein in order to obtain free protein glucans coded as LNP-I1, LNP-I2, LNP-I3 and LNP-I4 (LNP-I). The free-protein polysaccharides were sulfated to give derivatives (S-LNP-I) with degree of substitution (DS) from 0.4-0.8. The structural features and weight- average molecular weight (Mw) of the samples were investigated by using infrared spectroscopy, elemental analysis,13C-NMR, size exclusion chromatography combined with laser light scattering (SEC-LLS) and viscometry. The effects of structure and conformation of the polysaccharides on antitumor activities were assayed in vivo (Sarcoma 180 solid tumors)and in vitro (Sarcoma 180, HL-60, MCF-7 and Vero tumors). The results indicated that the predominant species of the samples L-I and LNP-I in 0.2 mol/L NaCl aqueous solution existed as triple-helical chains with high rigidity and in dimethyl sulfoxide (DMSO) as single-flexible chains. Interestingly, the antitumor activities of LNP-I are lower than those of the native glucans (L-I), whereas their sulfated derivatives have higher inhibition ratio against Sarcoma 180 than LNP-I. The results reveal that the binding of protein, sulfated modification and the triple helix conformation are important factors in the enhancement of the antitumor activities of polysaccharides on the whole.     

Synthesis of an enzyme-like imprinted polymer with the substrate as the template, and its catalytic properties under aqueous conditions

Transition state analogues (TSAs) have long been regarded as ideal templates for the preparation of catalytically active synthetic imprinted polymers. In the current work, however, a new type of molecularly imprinted polymer (MIP) was synthesized with the substrate (homovanillic acid, HVA) as the template and hemin introduced as the catalytic center, with the use of plural functional monomers to prepare the active sites. The MIP successfully mimicked natural peroxidase, suggesting that it may not be imperative to employ a TSA as the template when preparing enzyme-like imprinted polymers and that the imprinted polymer matrix provided an advantageous microenvironment around the catalytic center (hemin), essentially similar to that supplied by apo-proteins in natural enzymes. Significantly, by taking advantage of the special structure of hemin and multiple-site interactions provided by several functional monomers, the intrinsic difficulties for MIPs in recognizing template molecules in polar solutions were overcome. The newly developed polymer showed considerable recognizing ability toward HVA, catalytic activity, substrate specificity and also stability, which are the merits lacked by the natural peroxidase. Meanwhile, the ease of recovery and reuse the MIP implies the potential for industrial application.     

石墨烯负载高活性Pd催化剂对乙醇的电催化氧化

以石墨粉为原料, 采用Hummers法液相氧化合成了氧化石墨(GO), 然后用化学一步还原制得石墨烯负载钯催化剂. X射线衍射(XRD)、透射电镜(TEM)表征表明, Pd在石墨烯载体上有较好的分散度, 粒径为3-5 nm. 电化学活性面积(EASA)、循环伏安(CV)、计时电流(CA)和计时电位(CP)等电化学测试表明, 与传统Pd/Vulcan XC-72相比, Pd/石墨烯催化剂对碱性介质中乙醇电催化氧化的催化活性有了很大的提高.     

α-取代氨基氟代苯基膦酸酯衍生物的合成、晶体结构与抗癌活性

利用席夫碱与亚磷酸酯反应, 合成了新型O,O'-二烷基-α-(6-甲氧苯并噻唑-2-基氨基)-4-氟苯基膦酸酯化合物, 结构经元素分析, IR, ¹H NMR, ¹³C NMR和X单晶衍射确认. X单晶衍射测试结果表明: 化合物3d分子属于四面体晶系, 空间群I4(1)/a, a＝2.1055(3) nm, b＝2.1055(3) nm, c＝2.0521(5) nm, α＝90.00°, β＝90.00°, γ＝90.00°, V＝0.9098(3) nm³, Z＝16, D_c＝1.321 mg/m³, ＝0.250 mm^－1, F(000)＝3808. 化合物还存在着1个分子内氢键[N(2)—H(2)…O(1)]. 生物测定表明化合物3f在20 g/mL浓度下对PC3细胞的抑制率为84.3%.     

抗癌性吲哚喹唑啉衍生物的定量构效关系

用量子化学密度泛函理论(DFT)、分子力学(MM＋)及回归分析方法,对一系列抗癌性吲哚喹唑啉衍生物进行了定量构效关系(QSAR)的研究.通过回归分析,筛选了影响抗癌活性的主要因素,建立了定量构效关系方程.结果表明,化合物的最低未占据分子轨道(LUMO)与最高占据分子轨道(HOMO)之间的能量差(ΔεL-H)、分子的疏水性(lgP)以及环D上的总电荷(ΣQD)和环D上R1取代基的第一个原子的净电荷(QFR1)是影响化合物抗癌活性的主要因素.所得模型对化合物抗癌活性有较好的预测效果. 同时, 与ΔεL-H密切相关的LUMO轨道能量及共轭平面面积对药物的DNA-结合及其活性起着十分重要的作用,可通过选取具有较强的拉电子性质同时又能与本系列化合物的骨架形成更大共轭体系的取代基R1,设计抗癌活性较高的化合物.     

壳聚糖/明胶/TiO2三元复合膜的制备与功能特性

纳米TiO2用阴离子表面改性剂SDS改性后,以溶液共混法制备了壳聚糖／明胶/TiO2复合膜,用FTIR、XRD、SEM、TEM表征了其结构与形态,并测试了其吸水率、透光率、力学性能和抑菌性能。进而探讨了复合膜中明胶和纳米TiO2含量对壳聚糖膜性能的影响。结果表明：复合膜中,壳聚糖、明胶和TiO2微粒间存在强烈的氢键相互作用,从而使明胶与壳聚糖具有良好的相容性,TiO2与壳聚糖、明胶分子间有很好的界面作用。适量TiO2的加入,可使壳聚糖／明胶共混膜的力学性能得到改善,明胶质量分数为0．30时,掺杂wTiO2为0．01、0．02的复合膜较壳聚糖／明胶共混膜的湿强及干态韧性分别提高了55．9％,40．8％和49．7％,47．9％。此外,复合膜的抑菌性能随明胶的增加而降低,但随TiO2的掺杂比的增加而增强,纳米TiO2的引入拓宽了壳聚糖和明胶两种天然高分子材料的应用范围。     

纳米WO3粉体的制备与光催化活性研究

报道了以钨酸钠和盐酸为主要原料,通过气液反应制备纳米WO3粉体光催化剂的新方法．在XPS,XRD,TEM等手段对催化剂进行了表征的基础上,又讨论了焙烧温度和乙醇加入量对催化剂粒度大小以及光催化活性的影响．同时对纳米WO3粉体催化剂的光催化重整乙醇制氢反应活性进行了研究,观察了产氢效率和光电化学行为．研究结果表明,气液反应法是一种简单有效的制备纳米WO3粉体催化剂的方法,并显示出较好的光催化活性;该方法所得的三氧化钨粉末粒子平均直径在100nm以下;钨酸钠溶液中乙醇加入量对三氧化钨粉末粒子的尺寸和分散性都有影响,随着乙醇量的增加,粒子尺寸减小,且分散性较好．焙烧温度引起的WO3粒子晶体结构的变化会导致光氧化还原电位变化,是引起光催化活性差异的主要原因．     

SDS及其与十二烷基三乙基溴化铵混合体系在矿化水中的表面活性

测定了十二烷基硫酸钠(SDS)、十二烷基三乙基溴化铵(DTEAB)单一体系及不同摩尔比的混合体系在矿化水溶液中的表面活性,并与在纯水和NaCl水溶液中的表面活性作了比较．所得结果表明：(1)阴离子表面活性剂SDS在含Ca^2 ,Mg^2 等的矿化水中有比在纯水和NaCl水溶液中更好的表面活性．这一方面是由于矿化水中的Ca^2 ,Mg^2 对负电胶团和表面吸附层的强烈电性作用,另一方面在大量Na^ 存在时,钠钙盐混合表面活性剂Krafft点提高不多;(2)SDS和DTEAB混合物在矿化水中具有很强的增效作用,其表面活性的变化规律与在纯水和NaCl水溶液中基本相同,表明阴阳离子表面活性剂混合体系具有优异的抗矿化水性能．这些结果可用阴、阳表面活性离子的电性作用解释．