Cyclic voltammetry study of electrodeposition of CuGaSe2 thin films on ITO-glass substrates

The electrodeposition mechanism of CuGaSe₂ (CGS) thin films on ITO substrates has been investigated using cyclic voltammetry technique. The cyclic voltammetric study was performed in unitary Cu, Ga and Se systems, binary Cu–Se, Ga–Se systems and ternary Cu–Ga–Se system. The electrodeposition metallic Ga from Ga unitary electrolytes is impossible due to its low reduction potential. No reduction peak was found for the reduction of Ga³⁺ to Ga in the cyclic voltammogram of unitary system. However, in the cyclic voltammogram of ternary Cu–Ga–Se system, reduction peak at −0.6 V was observed with addition of GaCl₃. Also, current density of the peak was increased with increasing concentration of GaCl₃. It is corresponded to the formation of gallium selenides and/or copper–gallium–selenium compounds. The contents of Ga in the films were significantly changed from −0.4 V to −0.6 V. SEM and XRD analysis also showed that surface morphology and crystalline phase of films were significantly changed with increasing Ga content.     

Sorption and pervaporation properties of crosslinked membranes of poly(ethylene oxide imide) segmented copolymer to aromatic/nonaromatic hydrocarbon mixtures

Poly(ethylene oxide imide) segmented copolymer (PEO‐PI) membranes were crosslinked by the chemical reaction between ethylene glycol diglycidyl ether and benzylalcohol groups of diamine moieties in polyimide segments at high temperatures. Sorption and diffusion of penetrants took place in poly(ethylene oxide) segment microdomains. Sorption and desorption behavior of pure vapors such as benzene (Bz), cyclohexane (Cx) and n‐hexane (Hx) was classified as the Fickian diffusion. Sorption isotherms of binary liquid mixtures could be represented by the Flory–Rehner model, but the model overpredicted the sorption amounts of Cx and Hx, leading to small predictions of sorption selectivity α_S for Bz/Cx and Bz/Hx systems. UNIFAC‐FV model fairly well predicted the sorption amounts of aromatic hydrocarbons, but significantly overestimated those of nonaromatic ones, leading to too small predictions of α_S. Pervaporation (PV) behavior of PEO‐PI membranes was governed by sorption behavior followed by membrane swelling. Diffusion coefficient weakly depended on the minimum cross section of a penetrant. The diffusivity selectivity α_D hardly depended on the feed composition and was about 1.4 and 0.75 for Bz/Cx and Bz/Hx, respectively. PV selectivity α_PV was larger for Bz/Hx than for Bz/Cx because of larger α_S. PEO‐PI membranes displayed high specific permeation flux Ql and reasonably high α_PV for aromatic/nonaromatic hydrocarbons; for example, Ql = 60 Kg μm/(m² h) and α_PV = 8 for a feed mixture containing Bz, Tol, Hx, n‐Ot and i‐Ot of 20 wt % at 353 K. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1800–1811, 2000     

Formation of negative oxidation states of platinum and gold in redox ionic liquid: Electrochemical evidence

The electrochemical reduction of noble metal electrodes in the presence of redox ionic liquid, 1-ferrocenylethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [FcEMIM][TFSI], was investigated by cyclic voltammetry. Our experiments suggest the formation of metal with negative oxidation states, in the cases of platinum and gold electrodes [M_n⁻, FcEMIM⁺]. By analogy with the previous work, the formation of these phases is concomitant with the insertion of the supporting electrolyte; which correspond in our experimental condition to the redox cation of the ionic liquid. As an exciting result, the electrochemical investigations of the reduced electrode in electrolytic solution, containing solvent and supporting electrolyte, evidence the presence of the ferrocene groups at the electrode surface. Moreover, the reduced electrode exhibits the presence of the ferrocene even after, contact with air, after ultrasound, and after physical polishing, highlighting the large stability of this organo-metallic phases formed in this media. The AFM investigations demonstrate the morphological change of the platinum surface after the reduction process. Finally, our works bring a formal electrochemical proof of the presence of the ionic liquid cation inside the electrode material after the cathodic treatment in this media.     

Electrochemical and Spectroscopic Properties of Fly Ash–Polyaniline Matrix Nanorod Composites

Polyaniline (PANI) nanocomposites were prepared with fly ash (FA) either by aging the starting materials (aniline and FA) before oxidative polymerisation or by including poly(styrene sulphonic acid) (PSSA) eliminating the aging step. The aging procedure formed polymer nanotubes that have cross-sectional diameters of 50–110 nm. The procedure involving PSSA produced nanorods and nanofibres composites that have diameters of 100–500 nm and length of up to 10 μm attributed to the presence of metal oxides and silica in FA. The electrochemical analysis of the PANI–PSSA–FA nanorod composites shows three redox couples with formal potentials, , values of 105 mV, 455 mV and 670 mV, and conductance, C, value of 1.21 × 10⁻² S. The UV-Vis spectroscopy of the polymeric nanorod shows absorption maxima at 340 and 370 nm (due to π–π^* transition of the benzoid rings), and 600–650 nm (due to charge transfer excitons of the quinoid structure), which are characteristic of emeraldine base.     

Reactivity of 2,2′‐Bis(2N‐(1,1′,3,3′‐tetramethyl‐guanidino))diphenylene‐amine with CuI and [Cu(MeCN)4][PF6]: Benzimidazole Formation vs. Cu Oxidation

The reaction of 2,2′‐Bis(2N‐(1,1′,3,3′‐tetramethyl‐guanidino))diphenylene‐amine (TMG₂PA) ( 1 ) with CuI in MeCN results in the formation of [Cu^II(TMG₂PA^amid)I] ( 2 ) indicatingthat Cu^I is the target of an oxidative attack of the N‐H proton of the ligand which itself is converted to molecular hydrogen. In contrast, if [Cu(MeCN)₄][PF₆] is used as the Cu^I source, [Cu^I₂(TMGbenz)₂][PF₆]₂ ( 3 ) is obtained instead. The use of the non‐coordinating counterion [PF₆]^– apparently prevents Cu^I from oxidation but induces itself a cyclisation reaction within the ligand which results in the formation of a benzimidazole‐guanidine ligand.     

Investigation of the interaction between HⅣ-1 DNA and cyclic peptides by electrospray ionization mass spectrometry

The interaction between HⅣ-1 DNA and five cyclic peptides (CP1-CP5) was investigated using electrospray ionization mass spectrometry (ESI-MS). It revealed that CP1 [c(Ala-Tyr-Leu-Ala-Gly)] and CP4 [c(Pro-D-Tyr-Leu-D-Ala-Gly)] have the higher binding affinity with the duplex DNA among the five cyclic peptides.     

Thermodynamic and voltammetric studies of salicylaldehyde-4-(2-pyridyl)-3-thiosemicarbazone

Summary UV spectra, dc polarograms, cyclic voltammetry and coulometry measurements of salicylaldehyde-4-(2-pyridyl)-3-thiosemicarbazone (H₂ SPT) were recorded inBritton-Robinson buffer solutions ofpH 2–12. The dissociation constants of H₂ SPT evaluated spectrophotometrically and potentiometrically in a 5% (v/v)DMF-water mixture are concordant. The dc-polarograms in solutions ofpH<8.5 exhibit a single 4-electron diffusion-controlled polarographic wave, whereas in solutions ofpH>8.5 two waves are observed. The cyclic voltammograms give a single cathodic peak in acidic and neutral solutions, whereas two cathodic peaks can be identified in alkaline ones. An electrode mechanism is proposed and discussed. The effect of temperature on the dissociation constants and the polarographic data was also investigated; the corresponding thermodynamic parameters were derived and are discussed.

---

Thermodynamische und voltammetrische Untersuchungen an Salicylaldehyd-4-(2-pyridyl)-3-thiosemicarbazon

Zusammenfassung UV-Spektroskopische, dc-polarographische, voltammetrische und coulometrische Messungen an Salicylaldehyd-4-(2-pyridyl)-3-thiosemicarbazon (H₂ SPT) inBritton-Robinson-Pufferlösungen (pH 2–12) wurden durchgeführt. Die spektrophotometrisch und potentiometrisch ermittelten Dissoziationskonstanten von H₂ SPT in 5% (v/v)DMF/Wasser stimmen überein. In Lösungen mit einempH-Wert unter 8.5 zeigen die dc-Polarogramme eine einzelne diffusionskontrollierte polarographische Welle (4e^–), während in Lösungen mit einempH-Wert von über 8.5 zwei Wellen zu beobachten sind. Die cyclischen Voltammogramme weisen in sauren und neutralen Lösungen einen, in basischen Lösungen hingegen zwei kathodische Peaks auf. Ein Elektrodenmechanismus wird vorgeschlagen und diskutiert. Der Effekt der Temperatur auf die Dissoziationskonstanten und die polarographischen Ergebnisse wurde ebenfalls untersucht. Die entsprechenden thermodynamischen Größen wurden bestimmt und werden diskutiert.

     

The determination of organochlorine compounds and petroleum hydrocarbons in a seaweed sample: results of a world-wide intercomparison exercise

A seaweed sample (Fucus sp.) was prepared, homogenised and distributed to laboratories worldwide as the IAEA-140 intercomparison material for the analysis of organochlorine compounds and petroleum hydrocarbons. A total of 80 laboratories from 51 countries reported results for this sample. The data sets reported by laboratories were evaluated statistically and the mean concentration values could be computed with 95% confidence limits for a large number of analytes. The accuracy of the analytical performance of each laboratory has been introduced by using Z-scores. The spread of results reported generally indicates that the accurate determination of many persistent organic pollutants, such as hexachlorobenzene, lindane, Aroclors or fluoranthene, is still difficult for many laboratories. The final results of this intercomparison exercise enable individual participants to assess their performance and, where necessary, to introduce appropriate modifications in their analytical procedures. Furthermore, as a series of statistical criteria was fulfilled for a number of compounds, the sample IAEA-140 can now be used as a reference material for quality control in the determination of chlorinated compounds and petroleum hydrocarbons in environmental samples.     

Underpotential surface reduction of mesoporous CeO<Subscript>2</Subscript> nanoparticle films

The formation of variable-thickness CeO₂ nanoparticle mesoporous films from a colloidal nanoparticle solution (approximately 1–3-nm-diameter CeO₂) is demonstrated using a layer-by-layer deposition process with small organic binder molecules such as cyclohexanehexacarboxylate and phytate. Film growth is characterised by scanning and transmission electron microscopies, X-ray scattering and quartz crystal microbalance techniques. The surface electrochemistry of CeO₂ films before and after calcination at 500 °C in air is investigated. A well-defined Ce(IV/III) redox process confined to the oxide surface is observed. Beyond a threshold potential, a new phosphate phase, presumably CePO₄, is formed during electrochemical reduction of CeO₂ in aqueous phosphate buffer solution. The voltammetric signal is sensitive to (1) thermal pre-treatment, (2) film thickness, (3) phosphate concentration and (4) pH. The reversible ‘underpotential reduction’ of CeO₂ is demonstrated at potentials positive of the threshold. A transition occurs from the reversible ‘underpotential region’ in which no phosphate phase is formed to the irreversible ‘overpotential region’ in which the formation of the cerium(III) phosphate phase is observed. The experimental results are rationalised based on surface reactivity and nucleation effects.