Effects of pretreatments and modifiers on electrochemical properties of carbon paste electrodes

The electrochemical properties of carbon paste electrodes (CPEs), including unmodified and modified with protein and polycations, were investigated by impedance spectroscopy (IS) using ferricyanide and ferrocene monocarboxylic acid (FcMA) as redox probes. Various electrochemical pretreatments were applied to the unmodified CPE. The heterogeneous charge transfer rate constant of ferro/ferricyanide couple is enhanced by 2 to 10 times compared with that obtained at untreated electrodes. It was found that for ferricyanide the more suitable pretreatments are successive cyclic voltammetric scans, cathodization and a square wave-like stepping rather than high-potential anodization. However, the pretreatment only exhibits a slight effect on the kinetics of FcMA. At the CPEs containing modifier, the electron transfer rate of the redox couple depends more on the pH of electrolyte solution if ferro/ferricyanide is used. The results can be explained by the differently charged states of the CPEs that were caused by the protonation or deprotonation of the modifiers in various pH solutions and demonstrate the importance of the electrostatic interaction on the kinetics of the highly polar species such as ferricyanide. The different adsorptive behavior of ferricyanide and FcMA is also discussed.     

Electrochemical Behavior of Diphenyl Disulfide and Thiophenol on Glassy Carbon and Gold Electrodes in Aprotic Media

The investigation of the electrochemical reduction processes of C₆H₅SSC₆H₅ and C₆H₅SH in CH₃CN using cyclic voltammetry indicates a different behavior on GC and Au electrodes. On GC surface adsorption phenomena are absent, the electrochemical reduction process is irreversible and diffusion controlled. For both the starting molecules the same species, C₆H₅S^?, is formed upon reduction. The E° values of the reduction processes were determined by convolution method and the standard free energy of the S? S bond of C₆H₅SSC₆H₅ estimated. On Au surface instead, a self‐assembled monolayer of C₆H₅SAu_ads originated after the S? S or S? H bond breaking can be observed by simply dipping the electrode in solution of C₆H₅SSC₆H₅ and C₆H₅SH, respectively. The properties of the SAM were investigated by electrochemical reduction of the adsorbed thiolates. On Au electrode the reduction processes involve C₆H₅SAu_ads and give rise to desorbed C₆H₅S^?. A neutral radical is obtained by electrochemical oxidation of thiolate anion. It reacts rapidly with the electrode surface to give the S‐Au bond again.     

Kinetic and computational studies on aminolysis of bicyclic carbonates bearing alicyclic structure giving alicyclic hydroxyurethanes

Aminolysis of bicyclic carbonates, which consist of five-membered cyclic carbonate and five- or six-membered alicyclic groups, was examined. Kinetic studies revealed that the aminolysis of the bicyclic carbonate with cyclohexane ring proceeded more smoothly than that of the bicyclic carbonate with cyclopentane ring. Computational calculation suggested that the different reaction rates originate from the distinct ring-strain of the cyclic carbonate groups affected by the conformation of the alicyclic groups.     

Synthesis of [13]-membered macrocyclic stevastelins via a transesterification reaction as the key step: total synthesis of stevastelin C3

A new synthesis of stevastelin C3 (3), a [13]-membered ring component of the stevastelin family, whose structure was recently revised, is reported. Initially, a macrolactonization approach was attempted to generate the [13]-membered macrolactone but this met with failure, so a translactonization reaction was tried to obtain the targeted stevastelin C3 (3) from the corresponding [15]-membered ring counterpart. Unfortunately, this strategy did not prove successful, and, consequently, we opted to undertake a transesterification reaction from 23, as a means to accommodate the requisite aminoacid moiety at the correct position, to obtain 24. From 24, and through intermediates 25-28, the acyclic precursor of the [13]-membered ring macrolactone, compound 30, was efficiently prepared. By utilizing the synthetic course developed by Chida, we took 30 forward and completed the total synthesis of stevastelin C3 (3).     

阳极氧化膜WO3（Ⅱ）：电显色的介质效应

用循环计时电量法、循环伏安法、电化学现场(in-situ)紫外可见反射光谱技术和光电流谱技术研究了溶剂和阳离子(H~+,Li~+)对阳极氧化膜WO_3电显色稳定性和过程的影响。从循环计时电量图可以测定表征膜稳定性的氢或锂的累积量和暂态周期数。实验发现W/WO_3/LiCLO_4乙腈溶液体系具有高的电显色稳定性。引起WO_3膜可逆电显色的H~+和Li~+离子的嵌-脱过程的界面电化学机理不同。着色态WO_3膜的色心是自由电子,其密度超过10~(21)/cm~3,生色机理是等离子体振荡。     

Study of the Behavior of an EC Mechanism Using Cyclic and Derivative Chronopotentiometric Techniques with Spherical Electrodes

The theory for an EC mechanism in chronopotentiometric techniques – reversal chronopotentiometry, cyclic chronopotentiometry and reciprocal derivative chronopotentiometry – is developed. The equations of this article are valid for spherical electrodes of any size and present a compact and easy‐to‐manage form. Methods for determining kinetic parameters of the chemical reaction are proposed and the influence of the electrode radius is discussed. We conclude that large errors in the determination of these parameters are committed if electrode sphericity is neglected. Reciprocal derivative chronopotentiometry has been applied in its traditional form (dt/dE vs. E), and in a more recently proposed modality consisting of plotting dt^1/2/dE vs. E. These techniques are very convenient for studying an EC mechanism since the response is obtained in the form of peaks which are quantitatively related to the kinetic parameters of the chemical reaction. A comparison of the chronopotentiometric methods analyzed leads us to conclude that working curves based on the dt^1/2/dE vs. E curves are more suitable to obtain accurate values of the rate constants of the chemical reaction.     

Fluordiazadiphosphetidine, 11. Mitt.: Eine neue Methode zur Herstellung der doppelt zwitterionischen Verbindung (CH3N)6P4F8

A new synthetic route for the preparation of the betain-like compound (CH₃N)₆P₄F₈ from (CH₃NPF₃)₂,N-methyl-hexamethyldisilazane andN,N-dimethyl-urea has been found. The steps of this multi-stage reaction could be rationalized to a far extent.

10. Mitteilung:Kubjacek M., Utvary K., Mh. Chem.112, 305 (1981).     

Charge transfer across a polymer gel/liquid interface: determination of ionophores

An electrochemical method for the determination of the ionophores monensin and lasalocid was developed, based on the polarization of an agar gel/nitrobenzene electrolyte interface. The measured current corresponding to the facilitated ion transfer across this interface is directly proportional to the concentration of an ionophore dissolved in the organic phase. Using cyclic voltammetry in a three-electrode system the detection limit for both ionophores is about 3 × 10^?5 M.     

Amperometric detection of hydrazine by cyclic voltammetry and flow injection analysis using ruthenium modified glassy carbon electrodes

Glassy carbon electrodes modified with (5-amino-1,10-phenanthroline)bis(bipyridine)ruthium(II) chloride hydrate, [(bpy)₂Ru(5-phenNH₂)]Cl₂·H₂O, are shown to oxidize hydrazine with excellent sensitivity. The presence of an amine group on the ruthenium complex facilitates electropolymerization onto the electrode surface. Using cyclic voltammetry, a large catalytic current is observed upon oxidation of hydrazine in phosphate buffer (pH 5.0), compared to the current obtained from the ruthenium-modified electrode with no hydrazine present. The sensitivity of cyclic voltammetry is sufficient for obtaining a linear calibration curve for hydrazine over the range of 10⁻⁵ to 10⁻² M. Hydrodynamic amperometry was used to determine the working potential for flow injection analysis. The limit of detection for hydrazine was determined to be 8.5 μM using FIA. The thickness of these films was shown to increase linearly with the number of electropolymerization cycles, in the range of 1000-2500 nm for 5-20 cycles, respectively, using Rutherford backscattering spectrometry (RBS). RBS analysis also suggests that the film is multilayered with the outermost layers containing a high ruthenium concentration, followed by layers where the concentration of ruthenium decreases linearly and approaches zero at the electrode surface.     

Chemical species produced in the reaction between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline and their iron(II) complexes: electrochemical studies and analytical applications

The cyclic voltammetric behavior of carbon paste electrodes modified by direct admixing with the products of the reactions between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline at 100°C and that of their iron(II) complexes is reported. The ligand(s) produced in absence of iron(II) are able to complex iron(II) and copper(II) ions reversibly, but other ions such as nickel(II), cobalt(II), cadmium(II) and manganese(II), if complexed, show no electrochemical activity. Admixing with the products of the reaction in the presence of excess of iron(II) ion, because of high insolubility and fast electron exchange, produces surfaces useful for amperometric detection in continuous-flow systems. The voltammetric and amperometric behavior in the presence of HSO^?₃ ions is reported in order to illustrate this application.