Synthesis of glycoluril catalyzed by potassium hydroxide under ultrasound irradiation

Synthesis of the glycolurils catalyzed by potassium hydroxide was carried out in 17–75% yield at 40 °C in EtOH under ultrasound irradiation. Compared to the method using stirring, the main advantage of the present procedure is milder conditions and shorter reaction time.     

Ultrasonically assisted synthesis of barium stannate incorporated graphitic carbon nitride nanocomposite and its analytical performance in electrochemical sensing of 4-nitrophenol

We describe the ultrasonic assisted preparation of barium stannate-graphitic carbon nitride nanocomposite (BSO-gCN) by a simple method and its application in electrochemical detection of 4-nitrophenol via electro-oxidation. A bath type ultrasonic cleaner with ultrasonic power and ultrasonic frequency of 100 W and 50 Hz, respectively, was used for the synthesis of BSO-gCN nanocomposite material. The prepared BSO-gCN nanocomposite was characterized by employing several spectroscopic and microscopic techniques such as X-ray diffraction, X-ray photoelectron spectroscopy, fourier transform infra-red, field emission scanning electron microscopy, and high resolution transmission electron microscopy, to unravel the structural and electronic features of the prepared nanocomposite. The BSO-gCN was drop-casted on a pre-treated glassy carbon electrode (GCE), and their sensor electrode was utilized for electrochemical sensing of 4-nitrophenol (4-NP). The BSO-gCN modified GCE exhibited better electrochemical sensing behavior than the bare GCE and other investigated electrodes. The electroanalytical parameters such as charge transfer coefficient (α = 0.5), the rate constant for electron transfer (k_s = 1.16 s⁻¹) and number of electron transferred were calculated. Linear sweep voltammetry (LSV) exhibited increase in peak current linearly with 4-NP concentration in the range between 1.6 and 50 μM. The lowest detection limit (LoD) was calculated to be 1 μM and sensitivity of 0.81 μA μM⁻¹ cm⁻²_. A 100-fold excess of various ions, such as Ca²⁺, Na⁺, K⁺, Cl⁻, I⁻, CO₃²⁻, NO₃, NH₄⁺ and SO₄²⁻ did not able to interfere with the determination of 4-NP and high sensitivity for detecting 4-NP in real samples was achieved. This newly developed BSO-gCN could be a potential candidate for electrochemical sensor applications.     

Quantitative nanoscopic impedance measurements on silver-ion conducting glasses using atomic force microscopy combined with impedance spectroscopy

Nanoscopic impedance measurements were carried out on silver ion conducting glasses by coupling an impedance spectrometer with an atomic force microscope. When ac voltages were applied to a conducting AFM tip being in contact with the glass surface, silver nanoparticles were formed during the cathodic half cycle, which were not completely reoxidized in the anodic half cycle. We describe two protocols allowing for a controlled particle growth. The electrochemical oxidation/reduction processes led to low tip/sample interfacial impedances, and the formed silver particles acted as nanoelectrodes sensing the spreading resistance of the glass below the particles. We made a quantitative check of the spreading resistance formula under the assumption that spreading of the electric field is governed by the lateral diameter of the particles and found good agreement between the mean value of the local conductivities obtained at different tip positions and the macroscopic conductivity.     

Electrochemical, morphological and microstructural characterization of carbon film resistor electrodes for application in electrochemical sensors

The electrochemical and microstructural properties of carbon film electrodes made from carbon film electrical resistors of 1.5, 15, 140 Ω and 2.0 kΩ nominal resistance have been investigated before and after electrochemical pre-treatment at +0.9 V vs SCE, in order to assess the potential use of these carbon film electrodes as electrochemical sensors and as substrates for sensors and biosensors. The results obtained are compared with those at electrodes made from previously investigated 2 Ω carbon film resistors. Cyclic voltammetry was performed in acetate buffer and phosphate buffer saline electrolytes and the kinetic parameters of the model redox system Fe(CN)₆^3−/4− obtained. The 1.5 Ω resistor electrodes show the best properties for sensor development with wide potential windows, similar electrochemical behaviour to those of 2 Ω and close-to-reversible kinetic parameters after electrochemical pre-treatment. The 15 and 140 Ω resistor electrodes show wide potential windows although with slower kinetics, whereas the 2.0 kΩ resistor electrodes show poor cyclic voltammetric profiles even after pre-treatment. Electrochemical impedance spectroscopy related these findings to the interfacial properties of the electrodes. Microstructural and morphological studies were carried out using contact mode Atomic Force Microscopy (AFM), Confocal Raman spectroscopy and X-ray diffraction. AFM showed more homogeneity of the films with lower nominal resistances, related to better electrochemical characteristics. X-ray diffraction and Confocal Raman spectroscopy indicate the existence of a graphitic structure in the carbon films.     

阿达玛变换成像光谱术的研究

本文论述了阿达玛变换成像光谱仪的基本原理,探讨了工作模式和若干设计问题,利用自行研制的实验装置,在可见波段获得了各种透明字形的成像光谱图。采用对称π变换和快速δ阿达玛变换,改善了实验数据的处理方法。     

The effect of ITO films thickness on the properties of flexible organic light emitting diode

Indium tin oxide (ITO) thin films were deposited on cyclic olefin copolymer substrate at room temperature by an inverse target sputtering system. The crystal structure and the surface morphology of the deposited ITO films were examined by X-ray diffraction and atomic force microscopy, separately. The electrical properties of the conductive films were explored by four-point probing. Visible spectrometer was used to measure the optical properties of ITO-coated films. The performance of the flexible organic light emitting diode device with different thickness anode was investigated in this study.     

Spectrum sensing for OFDM signals using pilot induced cyclostationarity in the presence of cyclic frequency offset

In this paper, the problem of spectrum sensing of OFDM signals for cognitive radios is considered. It is proposed to detect the cyclostationary features introduced in an OFDM signal due to inter-pilot correlation. The performance of the proposed detector is derived and verified in case of AWGN channels. It is observed that the performance of cyclostationary detectors relies on the knowledge of the exact value of the cyclic frequency of the signal of interest. However, an offset in the cyclic frequency may arise due to several reasons. Therefore, for the proposed detector to perform reliably, there is a need to estimate the cyclic frequency offset. The Cramer–Rao bound for the cyclic frequency offset (CFO) estimator is derived, and based on it, two algorithms to estimate and compensate for the CFO are proposed. Simulation results are then used to study the performance of the proposed detection technique under Rayleigh fading both in the presence and the absence of CFO. The performance of the proposed system model is also studied under fast fading, and an alternative test statistic is proposed.     

An order-by-disorder process in the cyclic phase of spin-2 condensate with a weak magnetic field

We present in this paper a model study on the “order-by-disorder” process in the cyclic phase of spin-2 condensate, which forms a family of incommensurable, spiral degenerate ground states. On the basis of the ordering mechanism of entropic splitting, it is demonstrated that the energy corrections resulting from quantum fluctuations of disorder lift the accidental degeneracy of the cyclic configurations and thus lead to an eventual spiral order called the cyclic order. The order-by-disorder phenomenon is then realized even if the magnetic field exists. Finally, we show that our theoretic observations can be verified experimentally by direct detection of the cyclic order in the ⁸⁷Rb condensate of a spin-2 manifold with a weak magnetic field.     

Metal deposition onto thiol-covered gold: Platinum on a 4-mercaptopyridine SAM

In this study we describe details of a new technique that allows to deposit metal on top of a self-assembled monolayer (SAM). Monoatomic high platinum islands were formed on a 4-mercaptopyridine SAM on Au(1 1 1) by first immersing the SAM-covered gold electrode in an aqueous solution of K₂PtCl₄ without potential control to allow Pt(II) ions to form a complex with the pyridine nitrogen. The complexed Pt(II) ions were then reduced electrochemically to Pt(0) after transferring the electrode to a Pt(II) ion-free solution. Upon reduction, monoatomic high Pt islands were observed in STM, the total coverage depending on the time for complexation. Ex situ angle-resolved XPS studies reveal that the Pt islands indeed reside on top of the SAM.     

铁-邻菲咯啉配合物的循环伏安-光谱电化学研究

以循环伏安及循环伏安-光谱电化学方法研究了铁-邻菲咯啉配合物的电化学行为,Fe2 与邻菲咯啉生成1∶3配合物,给出一对受扩散控制的可逆氧化还原峰。自由Fe2 在-0.24V电位处,给出了一表面控制的不可逆还原峰。由氧化过程中的光谱电化学数据获得式电位为E0=0.875V(vs.Ag/AgCl)和电子转移数为n=1.0。由还原过程的循环伏安-光谱电化学数据发现,[Fe(phen)3]3 的电化学还原过程为产物弱吸附的自加速过程,获得裸电极上的标准速率常数为k0=1.14×10-3cm/s,电子转移系数为α=0.189。Langmuir吸附常数β=0.059(±0.007),吸附表面上的电子转移系数为αa=0.313,反应速率常数为k0a=1.24(±0.17)×10-3(cm/s),式电位为:0.11±0.01V(SD=0.184)。