Effect of carbon nanotubes and their dispersion on thermal curing of polyimide precursors

The process of thermal imidization reaction is significant for temperature and time control in the polyimide industry. Here, we report the effect of carbon nanotubes and their states of dispersion on the thermal imidization of the precursor films of polyimide (poly(amic acid)) for the first time. The curing process was followed by measuring Fourier transform-infrared (FT-IR) spectra, fluorescence spectra, thermogravimetric-differential scanning calorimeter (TG-DSC) properties and the refractive indices of films. It was found that by evenly dispersing 1 wt% of carbon nanotubes assisted by a dispersant in the poly(amic acid),the full imidization temperature of the polyimide can be reduced from 300 °C to 250 °C. Different states of distribution of CNTs were observed by light microscopy and scanning electron microscopy, and proved that a better dispersion of carbon nanotubes dramatically enhanced the speed of imidization. Moreover, the DSC results showed that lower decomposition temperature of poly(amic acid) could be obtained with more uniform distribution of carbon nanotubes, which means the process of cyclodehydration of the poly(amic acid) was accelerated.     

Mechanical properties and curing kinetics of epoxy resins cured by various amino-terminated polyethers

<正>A high performance thermosetting epoxy resin crosslinkable at room temperature was obtained via directly moulding diglycidyl ether of bisphenol A(DGEBA) and flexibleα,ω-bisamino(n-alkylene)phenyl terminated poly(ethylene glycol).The influences of the n-alkylene inserted in aminophenyl of flexible amino-terminated polythers(ATPE) on the mechanical properties,fractographs and curing kinetics of the ATPE-DGEBA cured products were studied.The results show that the insertion of n-alkylene group into the aminophenyl group of the ATPE,on one hand,can significantly increase the strain relaxation rate and decrease glass transition temperature of the ATPE-DGEBA cured products,resulting in slight decrease of the Young's modulus and tensile strength,and significant increase of the toughness and elongation of the ATPE-DGEBA cured products.On the other hand,it can remarkably enhance the reactivity of amine with epoxy,much accelerating the curing rate of the ATPE-DGEBA systems.The activation energy of DGEBA cured by BAPTPE,BAMPTPE and BAEPTPE was 53.1,28.5 and 25.4 kJ·mol~(-1),respectively.The as-obtained ATPE-DGEBA cured products are homogeneous, transparent,and show excellent mechanical properties including tensile strength and toughness.Thus they are promising to have important applications in structure adhesives,casting bulk materials,functional coatings,cryogenic engineering, damping and sound absorbing materials.     

含螺环原碳酸酯齐聚物的合成表征及与环氧树脂的固化反应

合成了一种新的带羟基的螺环原碳酸酯，根据它与ＭＤＩ或ＨＤＩ的不同配比，制备了分子量不同的预聚物，其结构得到了核磁和红外数据的证实。用示差扫描量热仪和红外跟踪环氧树脂及其与预聚物混合后的固化反应过程。     

高性能固化剂在天津软弱地基加固的应用

通过对高性能 (AS系列 )固化剂与水泥的对比试验 ,研究其在天津软弱地基加固中适用性和优越性 ,并得出一套实用的固化剂加固软土地基的施工设计参数     

Polymerization of Blending Cholesteryl Acrylate and Methyl Phenyl Benzoyl Acrylate

Liquid crystal is a material which is between solid and liquid phase and commonly called mesophase. Blends of liquid crystal are of great interest because of their unique optical properties. Blending in this study using two monomers of liquid crystal were cholesteryl acrylate and methyl phenyl benzoyl acrylate. The polymerization process using uv curing techniques by irradiation UV ray and without irradiation UV ray. Polymerization of blending liquid crystal acrylate using initiator 2-hydroxy-2-methyl-1-phenylpropane. Based on peak at GPC curve of polymerization by irradiation UV ray, type of that polymer is copolymer. Therefore the polymerization without UV ray, type of that polymer is homopolymer. SEM images of liquid crystal acrylate polymer showed lamella chain models that are characteristic of a polymer chains. Type of polymer liquid crystal acrylate was the type of Side Chain Liquid Crystalline Polymers (SCLCPs). Therefore acrylate polymer liquid crystal in this research has semi-crystalline phase, which contained crystalline phase and amorphous phase on the XRD pattern. The results of FT-IR spectroscopic characterization of the two monomers showed a peak at the wave number of 1600.43 cm ^-1 and 1622.86 cm^-1 which indicates a double bond (C=C) were obtained from acrylation. While the spectroscopy on the product blending the wave number of the peak regions is reduced that shows that carbon double bonds (C=C) in the acrylate group has polymerized. It also strengthened with a very sharp peak for CC functional groups on the wave number of 2855.15 cm^-1. The results of this study indicate that the liquid crystal polymer acrylic polymerization results with radiation UV ray and without UV ray, respectively absorb light in the UV wavelength region 363 nm and 351 nm.     

Cure monitoring of CFRP composites by dynamic mechanical analyser

The cure characteristics of carbon/MTM44-1 epoxy composite prepreg and neat MTM44-1 epoxy resin are monitored using a dynamic mechanical analyser (DMA). This study also assesses whether the simple containment device recommended by the DMA manufacturer for powder and gel is suitable for prepregs. The device is a disposable 0.1-mm thick stainless steel pocket. The cure behaviour of the packaged materials is compared with that of the unpackaged prepreg. All the samples are cured following the manufacturer's 180°C-isothermal schedule with heating rates of 2 °C/min and 5 °C/min. The tests highlight that: (i) the cure of composite prepregs and resin can be monitored using a DMA; (ii) the stainless steel pocket does not influence the cure of the prepreg and resin; and (iii) the softening and melting of the uncured resin, the resin low viscosity state and the subsequent gelation-vitrification-solidification of the resin are detected with this method.     

Radiation induced effects on particulate composites from epoxy resin and fly-ash

In this paper gamma-radiation damages and effects on an epoxide matrix and on its particulate composite with coal fly ash have been studied; the curing of both formulations was carried out at room temperature by means of tetraethylenepentamine and of a tailored polyalkylenepolyaminophenolic product. The change on mechanical properties following the irradiation in air at room temperature has been tested as a function of the total absorbed dose. The chemical modification induced by the ionizing radiation on the matrices have been investigated by means of infrared spectrophotometry and differential scanning calorimetry. The high radiation resistance of the matrix and above all of the particulate composite suggests its use for the confinment of low and medium activity radwastes (nuclear or medical).     

Multivariate resolution of rank-deficient near-infrared spectroscopy data from the reaction of curing epoxy resins using the rank augmentation strategy and multivariate curve resolution alternating least squares approach

A model of the curing reaction between phenyl glycidyl ether (PGE) and aniline as the curing agent was studied isothermally at 95 °C and monitored in situ by near-infrared spectroscopy (NIR). The spectra were recorded every 5 min. The ubiquitous problem of rank deficiency in reaction network systems was solved by assembling an augmented column-wise matrix containing five process runs from different initial conditions. The data were analyzed using a two-way multivariate curve resolution alternating least squares method (MCR-ALS). Initial estimates of spectra required by MCR-ALS were given by a SIMPLe-to-use Interactive Self-modeling Mixture Analysis (SIMPLISMA) approach. The reactants, product and intermediate spectra were successfully resolved and the concentration profiles properly represented the system studied. The performance of the model was evaluated by two parameters: ALS lack of fit (lof=0.88%) and explained variance (R²=99.99%). To validate the MCR-ALS results, the similarity coefficients (r) between the recovered spectra and the pure species spectra were calculated. These were: PGE (r=0.998), aniline (r=0.994) and tertiary amine (r=0.999).     

Influence of curing temperature on the optical properties of fluorinated polyimide thin films

The influence of curing temperature (CT) on the optical properties of 6FDA/ODA poly(amic acid)-polyimide (PAA-PI) films was characterized by measuring ATR-FT-IR spectra, refractive index (RI) and birefringence of the films. The results showed that the infrared absorption intensity of characteristic peaks (IAICP) corresponding to the imide ring and the RI of PAA-PI films reached their maxima when the films had been cured at 270 °C, while the magnitude of birefringence (|Δn|) of the films reached its minimum as CT rose up to 330 °C. However, the RI decreased as CT was between 270 °C and 330 °C. Both the RI and |Δn| of the film increased obviously when CT increased after 330 °C. We think this is due to the interchain crosslink reaction (ICCR) above 330 °C and can be an evident proof of ICCR. And the evidences supporting ICCR was also discussed via IR differential spectra.