Preparation of Polymer-Functionalized Iron Oxide Nanoparticles and Their Biomedical Properties

Superparamagnetic iron oxide nanoparticles with narrow size distributions were successfully prepared in large scale by a facile one‐pot synthetic method in the presence of hydrophilic polymers, such as polyethylene glycol diacid (HOOC‐PEG‐COOH) and poly(acrylic acid) (PAA). The as‐prepared products were investigated in detail by powder X‐ray diffraction (XRD), thermogravimetric analyses (TGA), transmission electron microscopy (TEM), high‐resolution transmission electron microscopy (HRTEM), dynamic light scattering (DLS), and vibrating sample magnetometer (VSM). The interaction between polymers and iron oxide nanoparticles was investigated using Fourier transform infrared spectrometry (FT‐IR). The results show that polymers can be attached onto the surface of iron oxide nanoparticle by bridging coordination and monodentate fashion, respectively. The interaction affects iron oxide nanoparticle properties significantly, such as XRD diffraction intensity, hydrodynamic diameter, isoelectric point, and saturation magnetization. Furthermore, the results of in vitro experiments indicated that iron oxide‐PEG‐COOH nanoparticle is more cytotoxic than iron oxide‐PAA nanoparticle due to different coordinating modes.     

4-十二烷氧基苄胺在纳米金微粒合成中的应用

以新型表面活性剂4-十二烷氧基苄胺(C12OBA)构成的C12OBA/正丁醇/正庚烷/丙醛/HAuCl4(aq)反相微乳液作为微反应器,利用微波辐射加热-丙醛还原法制备了C12OBA包覆金纳米微粒;利用透射电镜、傅立叶变换红外光谱仪及X射线衍射仪分析了产物的微观形貌、化学键合特征、晶体结构;并测定了其紫外-可见吸收光谱.结果显示,表面活性剂C12OBA既可参与形成稳定的反相微乳液,又可作为金纳米微粒的良好保护剂.反相微乳液液滴的微小水核以及C12OBA/金的物质的量之比对纳米金微粒的尺寸和形貌起到良好的控制作用.     

Electrodeposition of PdAu Alloy Nanoparticles on Ionic Liquid Functionalized Graphene Film for the Voltammetric Determination of Oxalic Acid

An ionic liquid functionalized graphene film was prepared and PdAu nanoparticles (NPs) were electrodeposited on it. The PdAu NPs were characterized by various methods and they showed the features of alloys. In 0.2 M H₂SO₄ solution, oxalic acid (OA) exhibited a sensitive anodic peak at the resulting electrode at about 1.1 V (vs. SCE), and the peak current was linear to OA concentration in the range of 5–100 µM with a sensitivity of 45.5 µA/mM. The detection limit was 2.7 µM (S/N=3). The electrode was successfully applied to the determination of OA in real sample.     

Wrinkling and Growth Mechanism of CuO Nanowires in Thermal Oxidation of Copper Foil

We report a systematic study on wrinkling and CuO nanowires （NWs） growth in the thermal oxidation of copper foil. Copper foils with thickness of 0.5 mm were thermally oxidized in air at 500℃ for 0.5-10 h. It is found that all the samples have wrinkles and the size of the wrinkles increases with the oxidation time increasing. CuO NWs can grow on both the sidehill and hilltop of wrinkle. The CuO NWs on sidehill are longer and denser than those on hilltop. The growth direction of the CuO NWs on sidehill is not vertical to the substrate but vertical to their growth surfaces. The process of wrinkling and CuO NWs growth can be divided into three stages： undulating, voiding, and cracking. The CuO NWs on both sidehill and hilltop grow at the undulating stage. However, only the CuO NWs on sidehill grow and those on hilltop stop growing at the voiding and cracking stages because of the void in hilltop. The local electric field in a wrinkle at undulating stage was calculated, and it is found that the difference of local electric field strengths between hilltop and sidehill is small, which indicates that the predominant driving force for the diffusion of Cu ion during CuO NWs growth is internal stress.     

CuO‐CeO2 Nanocomposite: A Highly Efficient Recyclable Catalyst for the Green Synthesis of 1,8‐Dioxooctahydroxanthenes in Water

CuO‐CeO₂ nanocomposite is reported as a highly efficient and recyclable catalyst for the green synthesis of 1,8‐dioxooctahydroxanthenes in water. This catalyst can be recovered by simple filtration and recycled up to 8 consecutive runs without any losing of its efficiency.     

FeCl3-Doped Polyaniline Nanoparticles as Reusable Heterogeneous Catalyst for the Synthesis of 2-Substituted Benzimidazoles

FeCl₃-doped polyaniline nanoparticles efficiently catalyze the synthesis of 2-substituted benzimidazoles by the reaction of aldehydes with o-phenylenediamine. Synthesis and characterization of the catalyst are described, and the obtained results confirms good dispersion of the FeCl₃ on the polyaniline. Simple workup, mild reaction conditions, low cost, easy separation, and reusability of the catalyst are some advantages of this method.     

Influence of caged bicyclic phosphate and CaCO3 nanoparticles on char-forming property of PU rigid foams

Char-forming property of PU rigid foams, which can be assessed by char residue (%) when PU is burned at certain temperature, was studied by TG and DTG. The results showed that pure PU rigid foam had low char residue of only 17%, while 33% of char residue was achieved when PU rigid foam was modified by adding 8 wt% of 1-oxo-2,6,7-trioxa-1-phosphabicyclo[2,2,2] octane (PEPA), which is a caged bicyclic phosphate. The experiment results of FTIR and XPS showed that the PEPA modified PU rigid foam could be dehydrogenated and dehydrated at temperature between 380 and 450 °C, resulting in the increase of char residue of PU rigid foam. Further study also revealed that the addition of CaCO₃ nanoparticles could enhance the char stability when the PEPA modified PU rigid foam was being burned. The mechanism was investigated and it was found that the enhanced char stability could be attributed to the limited permeation of oxygen caused by the formation of calcium phosphate and calcium pyrophosphate by the reaction of PEPA and CaCO₃ at high temperature, which were covered on or buried in the char layer.     

THE USE OF CARBOXYMETHYL ETHOXYLATE SURFACTANT TO DISSOLVE VITAMIN K1 AND TO OBTAIN LOW INTERFACIAL TENSION AND STABLE EMULSION SYSTEMS

Abstract

The presence of vitamin K₁ in human body is important for preventing the hemorrhagic disease. Due to its very long side chain, vitamin K₁ is highly insoluble in water. We have successfully dissolve a substantial amount of vitamin K₁ in solutions of a commercial surfactant containing carboxymethyl ethoxylates (Hüls B433) and obtained low interfacial tension (IFT) and stable emulsion systems. This paper will present the details of these experiments. The solubilization of vitamin K₁ was estimated from UV absorption. The IFT values were measured by using a spinning drop apparatus and all particle sizes were determined by using laser light scattering. By using the Hüls B433 surfactant and an optimum amount of CaCl₂, we can dissolve vitamin K₁ in water and obtain low IFT systems in the order of 10^?2 dyne/cm. The emulsions obtained in these systems are stable and contain droplet sizes below 65 nm. The dissolution of vitamin K₁ and the IFT behavior in these systems follow the rules for crude oil and prefer larger surfactant micelles.     

Study and Modeling of Metal Oxide Solubilization in (w/o) Microemulsions

Water-in-oil (w/o) microemulsions are very appealing reaction media due to their ability to provide huge surface of contact between water-soluble and oil-soluble reactants. Their application as reaction media, including the preparation of nanoparticles, is, however, limited to water soluble precursors. In this study, we present a first step scheme in a two-step process for the preparation of metal oxide nanoparticles starting from their water-insoluble metal oxide bulk powder. This step involves solubilizing the metal oxide in the water pools of the microemulsion with the aid of a solubilizing agent. The variables affecting the solubilizing capacity of iron and copper oxides, as examples of important metal oxides, in single HCl-containing AOT/water/isooctane microemulsions were investigated. The effect of the following variables on the solubilization capacity is reported, namely, mixing time, surfactant concentration, water to surfactant mole ratio (R), and the nominal concentration of HCl in the water pool. At 300-rpm, time-invariant concentration of the metals in the microemulsions was achieved in about 6 hours. These values were quoted as the solubilization capacity of the metal oxide at the corresponding conditions. Solubilization capacity increased linearly with the surfactant concentration and R, and portrait a power function with the nominal concentration of HCl in the water pool. A mathematical model previously derived to describe nanoparticle uptake by single microemulsion accurately accounted for the effect of the aforementioned variables on the solubilization capacity.     

Effect of Rough Nanoparticle Orientation on DLVO Energy Interaction

This study investigated the effect of the orientation of rough nanoparticles on Derjaguin and Landau, Verwey and Overbeek (DLVO) energy interaction. Rippled sphere model was used to survey van der Waals attraction energy and repulsive double-layer interaction energy between nanoparticles. The effect of particle size, asperity size, number of asperities, and concentration was studied for different orientations. Spherical coordinates were used to evaluate the effect of changes in orientation under controlled conditions. Surface element integral method was used to calculate DLVO energy interactions between rough particles at specific orientations. The DLVO energy results show that a change in orientation significantly affected the stability of the nanoparticles. The stability of dispersion varied as the contact surface between nanoparticles changed.