6H-SiC衬底片的表面处理

相比于蓝宝石,6H-SiC是制作GaN高功率器件更有前途的衬底.本文研究了表面处理如研磨、化学机械抛光对6H-SiC衬底表面特性的影响.用显微镜、原子力显微镜、拉曼光谱、卢瑟福背散射谱表征了衬底表面.结果表明经过两步化学机械抛光后提高了表面质量.经第二步化学机械抛光后的衬底具有优异的表面形貌、高透射率和极小的损伤层,其表面粗糙度RMS是0.12nm.在该衬底上用MOCVD方法长出了高质量的GaN外延膜.     

退火温度对6H-SiC衬底上ZnO薄膜发光性质的影响

采用溶胶-凝胶方法,在6H-SiC衬底上制备ZnO薄膜.X射线衍射结果表明薄膜是c轴取向的,具有六方纤锌矿多晶结构.研究了退火温度对ZnO薄膜发光特性的影响.发现在650℃退火温度下,观察到近带边紫外发射和可见光发射并且紫外发光强度大于可见光发射.随着退火温度的提高,紫外峰强度减弱直至消失,而绿光发射强度先增加而后降低.对退火温度引起ZnO薄膜发光性质改变的机制进行了探讨.     

Structural and Functional Analysis of the Pyridoxal Phosphate Homeostasis Protein YggS from Fusobacterium nucleatum

Pyridoxal 5′-phosphate (PLP) is the active form of vitamin B6, but it is highly reactive and poisonous in its free form. YggS is a PLP-binding protein found in bacteria and humans that mediates PLP homeostasis by delivering PLP to target enzymes or by performing a protective function. Several biochemical and structural studies of YggS have been reported, but the mechanism by which YggS recognizes PLP has not been fully elucidated. Here, we report a functional and structural analysis of YggS from Fusobacterium nucleatum (FnYggS). The PLP molecule could bind to native FnYggS, but no PLP binding was observed for selenomethionine (SeMet)-derivatized FnYggS. The crystal structure of FnYggS showed a type III TIM barrel fold, exhibiting structural homology with several other PLP-dependent enzymes. Although FnYggS exhibited low (<35%) amino acid sequence similarity with previously studied YggS proteins, its overall structure and PLP-binding site were highly conserved. In the PLP-binding site of FnYggS, the sulfate ion was coordinated by the conserved residues Ser201, Gly218, and Thr219, which were positioned to provide the binding moiety for the phosphate group of PLP. The mutagenesis study showed that the conserved Ser201 residue in FnYggS was the key residue for PLP binding. These results will expand the knowledge of the molecular properties and function of the YggS family.     

Laser cladding of copper with molybdenum for wear resistance enhancement in electrical contacts

Laser cladding of Mo on Cu has been attempted with the aim of enhancing the wear resistance and hence increasing the service life of electrical contacts made of Cu. In order to overcome the difficulties arising from the large difference in thermal properties and the low mutual solubility between Cu and Mo, Ni was introduced as an intermediate layer between Mo and Cu. The Ni and Mo layers were laser clad one after the other to form a sandwich layer of Mo/Ni/Cu. Excellent bonding between the clad layer and the Cu substrate was ensured by strong metallurgical bonding. The hardness of the surface of the clad layer is seven times higher than that of the Cu substrate. Pin-on-disc wear tests consistently showed that the abrasive wear resistance of the clad layer was also improved by a factor of seven as compared with untreated Cu substrate. The specific electrical contact resistance of the clad surface was about 5.6 × 10⁻⁷ Ω cm².     

Isolation and HPLC Quantitative Determination of 5α-Reductase Inhibitors from Tectona grandis L.f. Leaf Extract

Steroid 5α-reductase plays a crucial role in catalyzing the conversion of testosterone to dihydrotestosterone, which is involved in many androgen-dependent disorders. Leaf-hexane extract from Tectona grandis L.f. has shown promise as a 5α-reductase inhibitor. The objectives of this current study were to isolate and identify 5α-reductase inhibitors from T. grandis leaves and to use them as the bioactive markers for standardization of the extract. Three terpenoid compounds, (+)-eperua-8,13-dien-15-oic acid (1), (+)-eperua-7,13-dien-15-oic acid (2), and lupeol (3), were isolated and evaluated for 5α-reductase inhibitory activity. Compounds 1 and 2 exhibited potent 5α-reductase inhibitory activity, while 3 showed weak inhibitory activity. An HPLC method for the quantitative determination of the two potent inhibitors (1 and 2), applicable for quality control of T. grandis leaf extracts, was also developed. The ethanolic extract showed a significantly higher content of 1 and 2 than found in the hexane extract, suggesting that ethanol is a preferable extraction solvent. This study is the first reported isolation of 5α-reductase inhibitors (1 and 2) from T. grandis leaves. The extraction and quality control methods that are safe and useful for further development of T. grandis leaf extract as an active ingredient for hair loss treatment products are also reported.     

New Derivatives of 5-Substituted Uracils: Potential Agents with a Wide Spectrum of Biological Activity

Pyrimidine nucleoside analogues are widely used to treat infections caused by the human immunodeficiency virus (HIV) and DNA viruses from the herpes family. It has been shown that 5-substituted uracil derivatives can inhibit HIV-1, herpes family viruses, mycobacteria and other pathogens through various mechanisms. Among the 5-substituted pyrimidine nucleosides, there are not only the classical nucleoside inhibitors of the herpes family viruses, 2′-deoxy-5-iodocytidine and 5-bromovinyl-2′-deoxyuridine, but also derivatives of 1-(benzyl)-5-(phenylamino)uracil, which proved to be non-nucleoside inhibitors of HIV-1 and EBV. It made this modification of nucleoside analogues very promising in connection with the emergence of new viruses and the crisis of drug resistance when the task of creating effective antiviral agents of new types that act on other targets or exhibit activity by other mechanisms is very urgent. In this paper, we present the design, synthesis and primary screening of the biological activity of new nucleoside analogues, namely, 5′-norcarbocyclic derivatives of substituted 5-arylamino- and 5-aryloxyuracils, against RNA viruses.     

Aggregation of clay platelets in nematic liquid crystal, 5CB: microstructure,electrical conductivity and rheological investigations

The microstructure, electrical conductivity and rheological properties of a nematic liquid crystal (5CB) doped at concentrations up to 4.5 wt% of montmorillonite (MMT) or organomontmorillonite (OMMT) clay nanoplatelets, were investigated at temperatures between 293 and 310 K. Microscopy and electrical conductivity assessment revealed noticeable differences in aggregation in MMT and OMMT suspensions, MMT nanoplatelets showing a strong tendency to aggregation. The incubation of 5CB in the presence of MMT initially produced loose aggregation, followed by the formation of compact aggregates. The latter had practically no influence on the surrounding inter-aggregate regions. In the case of OMMT, a greater degree of integration of the nanoplatelets was observed within the liquid crystal structure of 5CB, resulting in a noticeable effect on electrical conductivity and activation energy of the composite material. Thixotropy was observed in suspensions of 5CB composites formed with either MMT or OMMT. A composite of 5CB with OMMT also exhibited anomalous viscous thinning at shear rates below 100 s^?1. A structural model is suggested to explain this behaviour.     

The Determination of Trace Elements by Flame Atomic Absorption Spectrometry: Effect of the Composition of Standard Solution Matrices

Abstract

The effect of using solution matrices in calibration standards different from those employed for the extraction steps in the determination of Cd, Cr, Cu, Ni and Zn were tested. Cu and Zn are little affected by matrix effects but, if the extractant is ammonium acetate, the use of other matrices may result in too high Cd, Cr and Ni values.