Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006     

Structural studies on ruthenium(II) complexes used in interphase catalysis for the hydrogenation of ketones

Structural studies were performed on catalytically active ruthenium(II) complexes used in interphases, by means of XAFS spectroscopy. The EXAFS investigations indicate that the complexes retain their structural integrity when they are embedded on polysiloxane matrices to form stationary phase materials. The AXAFS studies reveal that the variations in the catalytic activity of the complexes with different ligands can be correlated to the differences in the electronic structure around the active ruthenium center. The EXAFS investigations show that, in asymmetric transfer hydrogenation reactions catalysed by ruthenium(II) complexes, the co‐catalyst plays a crucial role not only in enhancing the catalytic activity, but also in determining the structure of the intermediate species. Copyright © 2007 John Wiley & Sons, Ltd.     

ZnCl2/粘土-SA01催化剂上二苯甲烷的合成

在环境友好ZnCl2/粘土-SA01催化剂上合成了二苯甲烷,较系统地考察了负载量、苯/苄基氯摩尔比、催化剂用量、反应温度、反应时间对该傅克反应的影响,并与催化剂的表面性质关联.实验结果表明,该催化剂具有良好的催化活性和稳定性并易于回收重复使用.     

Ti－Si沸石的催化氧化性能Ⅱ．环己醇的氧化及环己酮的肟化

Ｔｉ－Ｓｉ沸石的催化氧化性能Ⅱ．环己醇的氧化及环己酮的肟化夏清华，王公慰，应慕良，郑禄彬（中国科学院大连化学物理研究所，大连１１６０１２）关键词Ｔｉ－Ｓｉ沸石催化剂，Ｈ_２Ｏ_２氧化剂，环己醇氧化，环己酮肟化．１．前言环己酮肟是生产ε－己内酰胺的关键中...     

CuO—ZnO／Al2O3—TiO2催化剂中TiO2的结构和电子效应

采用XPS,XRD,TPR,TPD和指标反应等方法研究了TiO_2在负载型CuO-ZnO/Al_2O_3-TiO_2催化剂中所起的作用.发现TiO_2起双重作用,即结构效应和电子效应,TiO_2的结构效应主要表现为它改善了CuO在载体上的分布.TiO_2的电子效应表现为它对Cu~0具有吸电子的作用,从而削弱了Cu和S之间的吸附力,使S容易脱除.另外,部分还原形成的Ti~(3+)具有促进CuS中的Cu~(2+)还原为Cu~0的能力,TiO_2的上述效应的综合结果使催化剂的抗硫中毒性能大大增强.     

双环戊二烯的催化氢脂基化制备三环单,双酯

双环戊二烯(DCPD)通过均相催化与一氧化碳及乙醇或甲醇反应生成四种三环单酯或三种三环双酯,其反应式如下:     

二氯甲烷在担载型三氧化铬催化剂上的催化降解

本文研究了二氯甲烷在不同的担载型ＣｒＯ_３催化剂上的催化降解．实验揭示：碳纤维的单丝直径粗细，吸附能力，ＺＳＭ－５沸石中晶格外铝的含量以及Ａｌ_２Ｏ_３的形貌与物相等均明显影响催化剂的催化活性与选择性．文中对不同的载体作了比较，还对活性组分ＣｒＯ_３的铬的价态，用氢气还原与空气灼烧两种预处理对催化行为的影响进行了讨论．     

三氟化硼修饰载体负载茂金属催化乙烯聚合

用BF3对载体硅胶和氧化铝进行了表面修饰,考察了修饰的载体负载茂金属催化剂后催化乙烯聚合的特性.研究表明,用BF3修饰过的载体负载二氯二茂锆催化乙烯的聚合,聚合活性有较大提高,具有工业应用前景,并且提出了这一催化体系的负载机理.