A Multi-component Matrix Loop Algebra and Its Application

A set of multi-component matrix Lie algebra is constructed. It follows that a type of new loop algebra A^- M-1 is presented. An isospectral problem is established. Integrable multi-component hierarchy is obtained by Tu pattern, which possesses tri-Hamiltonian structures. Furthermore, it can be reduced to the well-known AKNS hierarchy and BPT hierarchy. Therefore, the major result of this paper can be regarded as a unified expression integrable model of the AKNS hierarchy and the BPT hierarchy.     

Indriect Determination of CTMAB with Sodium Chloride and Ammonium Thiocyanate by Floatation and Separation of Zine

A new method for indirect determination of cetyl-trimethyl ammonium bromide (CTMAB) with NaCl and NH4SCH by floatation and separation of zinc has been studied.The study shows that Zn(Ⅱ） can associate with NH4SCN and CTMAB to form insoluble ternary ion-association complex,and the precipitate can float on the surface of the liquid phase.A good linear relationship is observed between the floatation yield(E%) of Zn(Ⅱ） and the amount of CTMAB.On the ground,CTMAB Can be indirectly determined by determining E% of Zn(Ⅱ）.The results were satisfactory.     

Proton Fraction in Neutron Star Matter and Three-Body Force Effects

The three-body force effects on the equation of state and its iso-spin dependence of asymmetric nuclear matter and on the proton fraction in neutron star matter have been investigated[1] within Brueckner Hartree-Fock (BHF) approach by using a microscopic three-body force. It is shown that, even in the presence of the three-body force, the empirical parabolic law of the energy per nucleon vs. isospin asymmetry β=(N-Z)/A is fulfilled in the whole asymmetry range 0 ≤β ≤1 and also up to high density. The three-body force provides a strong enhancement of symmetry energy at high density in agreement with relativistic approaches. Thecalculated proton fraction in β stable neutron star matter is given in Fig.l, where the thick solid line is the BHF prediction using AV18 TBF, while the dotted one is the BHF result using AVis. The thin solid line is the prediction of the Dirac-Brueckner approach taken from Ref.[2]. The results extracted according to the phenomenological paramete rizations of the symmetry energy suggested in Ref.[3] are also plotted. It is seen from     

极紫外望远镜各通道夹角的测量

极紫外望远镜是由四个单通道的望远镜捆绑在一起,以便同时对太阳的相同部分观测,由于受地面装调以及发射过程中的影响,无法保证四个通道光轴严格平行,必然带来观测位置上的误差。只要测出各通道之间的光轴夹角,便可在像面上采取适当的处理方法,以便减小这种误差,但这一夹角的测量精度必须控制在0.1″内。为达到如此高的精度,采用了太阳局部边缘探测的方法,很好地解决了这一问题。     

THE COUPLING OF NATURAL BOUNDARY ELEMENT AND FINITE ELEMENT METHOD FOR 2D HYPERBOLIC EQUATIONS

In this paper, we investigate the coupling of natural boundary element and finite element methods of exterior initial boundary value problems for hyperbolic equations. The governing equation is first discretized in time, leading to a time-step scheme, where an exterior elliptic problem has to be solved in each time step. Second, a circular artificial boundary FR consisting of a circle of radius R is introduced, the original problem in an unbounded domain is transformed into the nonlocal boundary value problem in abounded subdomain. And the natural integral equation and the Poisson integral formula are obtained in the infinite domainΩ2 outside circle of radius R. The coupled variational formulation is given. Only the function itself, not its normal derivative at artificial boundary ΓR, appears in the variational equation, so that the unknown numbers are reducedand the boundary element stiffness matrix has a few different elements. Such a coupled method is superior to the one based on direct boundary element method. This paper discusses finite element discretization for variational problem and its corresponding numerical technique, and the convergence for the numerical solutions. Finally, the numerical example is presented to illustrate feasibility and efficiency of this method.     

侵彻环境下两种钨合金的细观响应特性

本文实验发现具有较大密度和较高速度的93W钨合金长杆模拟弹的穿靶深度反而比密度较小，速度较低的90W钨合金长杆弹的穿靶深度小．针对这一现象，本文从两种材料在侵彻环境下的细观响应特性的差异上给出了有实验根据的合理分析，结论是90W在侵彻环境下较易于形成绝热剪切带，从而在弹头部发生“自锐化”效应所致．     

Fe-V-N稀合金中空位复合体特性的研究(Ⅱ)

本文利用离散变分法,集团模型和三维数值弛豫技术,研究了Fe-V-N稀合金中V-N-空位复合体的几何构型,正电子湮没特性和电子结构。根据正电子湮没寿命实验的结果和总能量极小原理,确定了V和N在V-N-空位复合体中的最佳占据位置。分析了V-N-空位复合体的成键特性和电荷转移情况。 关键词：     

三包层WⅠ和WⅡ型单模光纤波导色散特性的研究

研究了三包层WⅠ和WⅡ型单模光纤的波导色散特性。结果发现在相同条件下，三包层WⅠ和WⅡ型单模光纤零色散点的调节范围比传统的双包层W型单模光纤明显增大。详细分析了几何参量P、Q和光学参量R1、R2对单模传输时的波导色散特性和低次模截止频率的影响。所得的研究结果为获得更为理想的色散补偿、色散平坦光纤及设计新型无源光器件提供了重要的依据。计算波导色散的方法可推广到多包层光纤。     

烷烃类分子对NC0（A^2∑^＋）自由基的猝灭

采用激光光解—激光诱导荧光(LP—LIF)的方法，用266nm激光光解CHBr3分子产生CH自由基，再与N2O继续反应作为NCO自由基的产生源，用438．6nm激光将电子基态X^2∏i(00^10)的NCO激励到激发态A^2∑^+(00^00)上，通过检测激发态NCO时间分辨荧光信号，测得室温(298K)下NCO(A^2∑^+)被烷烃类分子猝灭的实验结果，获得了A^2∑^+(00^00)态猝灭速率常数．实验发现，随着烷烃分子中C—H键数增加，其猝灭截面也近线性增加，但随着分子体积增大，这种增加趋缓．