CuCrAl和CuCrZr低温液相合成甲醇催化剂的研究

 用络合共沉淀法制备了CuCrAl和CuCrZr复合氧化物液相合成甲醇催化剂，其比表面分别达到119和116m2／g．在5．0～5．5MPa和383K条件下，分别用间歇式和流动式反应釜考察了催化剂的活性和稳定性．结果表明：CuCrAl和CuCrZr的活性均明显高于CuCr；CuCrAl的活性略高于CuCrZr，但甲酸甲酯（MF）的选择性明显低于CuCrZr；两者在12h内未见活性明显下降．甲醇钠在反应过程中部分转化为甲酸钠和NaOH．CuCrAl和CuCrZr有较高的氢解活性可抑制甲醇钠与MF生成甲酸钠，从而有较低的甲酸钠浓度．但是，Al2O3和ZrO2的酸性有利于甲醇脱水，引起甲醇钠水解生成NaOH．溶剂对CuCr基催化剂的活性和选择性有明显影响．对反应机理进行了讨论．     

导电复合材料葡萄糖氧化酶传感器的研究

报导了用乙基纤维素和乙炔黑获得的导电复合材料构成的葡萄糖氧化酶生物传感器的制备方法.讨论了多种因素对该生物传感器响应电流的影响.测得此电极酶催化反应的活化能为40.3 kJ•mol－1. AFM实验表明，用环己烷洗去石蜡的导电复合材料 葡萄糖氧化酶生物传感器具有粒状结构，这有利于酶催化反应的进行.     

Products of lithium interaction with nanostructured oxides SnO2-TiO2 and mechanism of charge-discharge of electrodes in a lithium-ion battery

Products of lithium interaction with thin-film nanostructured SnO₂-TiO₂ (ST) oxides are studied with the aid of x-ray diffraction analysis and Moessbauer spectroscopy on the ¹¹⁹Sn nuclei. Electrochemical properties of a series of the ST electrodes with different concentrations of TiO₂ varied from 0 to 20 mol % are also examined. It is concluded that the specific feature of the charge-discharge mechanism of the ST electrodes is a significant participation of oxygen in reversible reactions during insertion and extraction of lithium as compared with an alloying mechanism of operation of tin-containing anodes. The leading role in this is played by titanium oxide. Remaining stable towards reduction by lithium, it facilitates the holding of the neighboring layers of SnO₂ in a nanodisperse state and in an oxidized state. The effect of a decrease in the capacity degradation in modified TiO₂ electrodes, which is discovered in this work, is attributed to the hampering of the growth of nanocrystallites of β-Sn by interlayers of tin and titanium oxides mentioned above.     

Simple route to secondary amides of phosphorylacetic acids and their use for extraction and sorption of actinides from nitric acid solutions

An efficient method for the synthesis of secondary alkylamides of phosphorylacetic acids (APA) was proposed. The method involves amidation of ethyl phosphorylacetates with primary aliphatic amines. The scope of reaction was determined. Reactions with ethylenediamine and 1,4-diaminobutane yield the corresponding bisamides; in the case of 1,3-diaminopropane, N-(3-aminopropyl)diphenylphosphorylacetamide or N,N-propylenebis(diphenylphosphorylacetamide) was obtained, depending on the reaction conditions. The extraction of americium(III) complexes and the sorption of uranium(VI) by sorbents with physically sorbed APA from nitric acid solutions were studied. There is no correlation between the partition coefficient of americium(III) and the structure of APA; in the sorption of uranium(VI), the degree of extraction depends on the complexone structure.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2394–2402, November, 2004.     

SOLID STATE CHEMISTRY OF La_(1-x)Li_(x)MnO_3 AND RELATED COMPOUND

A series of perovskite type oxides La_(1-x)A_(x)MnO_3(x=0.1 for A=Li,Na,K;x=0.1～0.5 for A=Li)have been prepared by impregnation.Experimental results showed that the substitution of La~(3 ) by Li~ inLaMnO_(3 ?) greatly increased the selectivity to ethane and ethylene for theoxidative coupling of methane.Temperature-programmed desorption of oxygenproved the presence of oxygen vacancies in the oxide lattice.The higher Mn~(4 )/Mn_t ratio in oxide made the formation of oxygen vacancies easier on the oxidesurface.The general formula of the oxides is La_(1-x)Li_(x)Mn＇V＇_(y)O_(3-y),V=vacancy.     

Polyalkoxybenzenes from plant sources 2. Synthesis of isoxazoline analogs of combretastatin from natural allyl(methylenedioxy)methoxybenzenes

A series of analogs of the natural mitostatic agent combretastatin were synthesized by the reaction of nitrile oxides with natural allylbenzenes, such as myristicin, apiol, and dillapiol. The 1,3-dipolar cycloaddition reactions in allylic systems proceed regiospecifically. The reactions with trans isomers of propenylbenzenes, viz., isomyristicin, isoapiol, and isodillapiol, as dipolarophiles produce regioisomers. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2375–2380, December, 2007.     

Preparation of Co3O4 Nanofibers via an Electrospinning Technique

Thin PVA/cobalt acetate composite fibers were prepared by using sol-gel processing and electrospinning technique.After calcination of the above precursor fibers,Co3O4 nanofibers with a diameter of 50-150 nm could be successfully obtained.The fibers were characterized by SEM,FT-IR,WAXD,respectively.     

计算单向复合材料弹性模量的新公式

根据复合材料单层的实际构造，提出了串并联组合模型，采用微观力学与宏观力学相结合的方法，推导出一组计算单向复合材料弹性模量的新公式。其优点是：Ｅ１和ｖ（１２）、Ｅ２和Ｇ（１２）的计算式形式对称，结构简单，计算容易，物理意义明确。我们把由世界上许多著名学者提出的多组预测公式和本文导出式计算所得的结果与国内外已发表的硼／环氧、碳／环氧、玻璃／环氧复合材料的实验数据相比较，结果表明：导出式比其他公式精确、更有价值，可供二程设计使用。     

聚苯胺复合材料研究进展

综述了聚苯胺/无机物复合材料和聚苯胺/有机高聚物复合材料的合成方法，性能特征，并展望了聚苯胺复合材料的研究，应用前景。     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.