微量元素锌在治疗Bell麻痹中的作用

为探讨急性早期应用补锌和综合疗法治疗Bell麻痹 ,将 1 5 8例Bell麻痹患者 ,随机分成两组 :(1 )补锌组 (补锌 +综合疗法 ) ;(2 )对照组 (单纯综合疗法 )。对其进行了观察对比治疗 ,同时检测了所有患者治疗前后自身对照发锌值 ,还对所有患者进行了定位诊断、面神经电反应测试、并对面肌功能进行评分。结果表明 ,对定位诊断其病变在D段、面肌功能评分在 1 1分以下、面神经无电反应患者 ,即使给予早期综合治疗 ,效果仍较差 ,而早期给予补锌加综合治疗效果优于对照组 ,其它段内患者治疗次数和治愈天数也均优于对照组。可见微量元素锌在发挥免疫应答、免疫调控中的重要作用     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

Effective electromagnetic and chiral parameters of chiral composite material

The effective parameters of chiral composite are studied using a simple model, that is, randomly oriented non-interacting wire helices embedded in a nonchiral host medium. It is found that both the effective permittivity and permeability are independent on the handedness of the chiral objects while the effective chirality admittance is dependent. It is also found that when the ratio of the radius of the chiral helix to its pitch is about 0.23, maximum chirality admittance is achieved. The effective parameters of equichiral sample are also discussed.     

Efficiency of composite vs. conically shaped chromatographic columns

The theory of composite chromatographic columns has been re-examined and general equations relating their efficiency to those of individual columns were derived. The derivations were based on elementary principles without reference to the principle of variance additivity. Derived also, were general equations for the efficiency of columns with continuously varying diameters, HETP and other properties from which formulae for special cases of practical interest were deduced. An example comparing the efficiencies of two columns, one conical and the other composite was given. The calculations show clearly that the conical column is superior in efficiency for the same total length and total retention volume.     

Optimisation of the chlorthalidone chiral separation by capillary electrochromatography using an achiral stationary phase and cyclodextrin in the mobile phase

The separation of chlorthalidone enantiomers in capillary electrochromatography on an achiral stationary phase when adding a chiral selector, hydroxypropyl-β-cyclodextrin, to the mobile phase, was optimised. The goal was to investigate the feasibility of modelling retention times and resolution when during the optimisation procedure regular replacement of columns is required due to their fragility. Therefore, it is essential that the packing procedure delivers reproducible columns. The optimisation of an existing chlorthalidone separation was chosen as case study. The influence of two factors, chiral selector concentration and organic modifier content, on the responses was modelled. The experiments performed prior to modelling were defined by a central composite design. Results on different columns, obtained under identical experimental conditions, were found comparable and thus modelling was possible in situations where several columns were required to complete a design. A second-order polynomial model was built for both responses. Optimal separations were also predicted using Derringer’s desirability functions. The optimum was found at 33 mM cyclodextrin and 16% (v/v) acetonitrile on two types of columns (with different packing times) leading to a strong reduction in analysis time for an equally good separation compared to the initial conditions. Measured and predicted responses were found comparable, indicating that acceptable models were obtained.     

The synthesis of chiral functionalised morpholine N-oxides using a tandem Cope elimination/reverse-Cope elimination protocol

Hydroxylamine derivatives of (S)-prolinol have been generated using a Cope elimination. These undergo reverse-Cope elimination onto a pendant double bond to give morpholine N-oxides containing three contiguous chiral centres.     

Rigid-rod polymers with polysiloxane side chains. 2. Synthesis and characterization of aromatic polybenzobisoxazoles with polysiloxane side chains and composite formation with polysiloxane matrices

Aromatic polybenzobisoxazoles, having polydimethylsiloxane side chains (SCPBOs), were prepared using terephthaloyl chloride-terminated polydimethylsiloxane macromonomers and 3,3′-bis(trimethylsiloxy)-4,4′-bis(trimethylsilylamino)biphenyl for the purpose of dispersing rigid-rod molecules in silicone matrices for molecular reinforcement. The degree of polymerization of the side chain was varied from 7.8 to 45.4, and a small amount of (3-butenyloxy)terephthaloyl chloride was copolymerized to give the polymers a functionality that can be linked to the matrices. For all the SCPBOs, the WAXD pattern showed only diffuse reflections, suggesting limited structural regularity, although the polymers were optically anisotropic. No melting transition was observed below the side chain decomposition temperature, 350°C. A polydimethylsiloxane/polybenzobisoxazole composite elastomer was obtained first curing the polysiloxane matrix containing the prepolymer of the SCPBO, followed by in situ thermal ring closure of the prepolymer. Some reinforcement was observed, but the presence of plasticizing effect by the unbound SCPBO was suggested at the same time. © 1995 John Wiley & Sons, Inc.     

Ester Elimination: A General Solvent Dependent Non-Hydrolytic Route to Metal and Mixed-Metal Oxides

Molecular routes to metal oxides has become an area of intensescientific interest due to the technological relevance of thesematerials. Molecular routes are proving important as a result ofthe possibility to control the physical and chemical propertiesof the final materials.We have chosen to study non-hydrolytic methods, namely esterelimination reactions between two prototypical molecularprecursors metal alkoxides, M(OR)_n, and metal carboxylates, M(O₂CR)_n, to synthesize metal oxides: This method allows for the synthesis of pure metal oxides bycomplete elimination of the organic supporting ligands withconcomitant formation of M-O-M bridges.Furthermore, incomplete esterelimination can lead to isolation of molecular clusters asintermediates which can also be used as building blocks for theformation of metal oxides with controlled microstructure.Here we report a series of reactions between Sn and Si alkoxidesand carboxylates designed to gain further insight into thefactors governing ester elimination reactions. By choosingcompounds with varying coordination environments and stericaccessibility we have devised a set of criteria which shouldallow for successful ester elimination between metal alkoxide andcarboxylate compounds. Furthermore we have also shown theability of ester elimination derived molecular clusters withspecific microstructure to be used in the synthesis of bulkmaterials retaining the structural attributes of the precursor cluster.     

Metallocene-mediated synthesis of chain-end functionalized polypropylene and application in PP/clay nanocomposites

This paper summarizes our research in the preparation of chain end functionalized isotactic polypropylene (PP) having a terminal functional group, such as Cl, OH, and NH₂. The chemistry involves metallocene-mediated propylene polymerization using rac-Me₂Si[2-Me-4-Ph(Ind)]₂ZrCl₂/MAO complex in the presence of styrene derivatives (St-f) and hydrogen, which serve as the chain transfer agents. The molecular weight of the resulting PP polymers with a terminal Cl, OH and NH₂ group (i.e., PP-t-Cl, PP-t-OH and PP-t-NH₂) are inversely proportional to the molar ratio of [St-f]/[propylene]. Despite the extremely low concentration of functional group, the high molecular weight chain end functionalized PP-t-OH and exhibit a distinctive advantage over other functional PP polymers containing side chain functional groups or long functional blocks. The terminal hydrophilic OH and cations, with good mobility and reactivity, effectively hydrogen bond and ion-exchange the cations (Li⁺, Na⁺, etc.) located between the clay interlayers, respectively. Such interactions anchor the PP chain to the clay surfaces. On the other hand, the remaining rest of the unperturbed end-tethered high molecular weight PP tail exfoliates the clay layers. This exfoliated structure is maintained even after further mixing of the PP-bearing platelets with pure neat PP polymers.     

掺铬铝酸钇红色颜料的合成、结构和性能表征

研究了高温固相合成制备掺铬铝酸钇红色颜料的方法，着重考察了灼烧温度（1000-1400℃）、灼烧时间（1-2h）、主要原料配比（Al／Y：1：0．5—1：1．5，Cr2O3％：0．3％-5％）等实验条件对产物结构和色泽的影响。XRD等方法对样品进行的相态分析表明，主相为铝酸钇石榴石相；运用反射光谱对红色颜料的色泽进行了反射峰位和相关强度的表征。当Y2O3：Al2O3摩尔比为1：1，掺杂3％的Cr2O3作显色剂，在少量矿化剂存在时，在1300℃下灼烧1 h，得到了色坐标为x=0．577，Y=0．401的红色陶瓷颜料。