Fractionation and Bioaccessibility of Manganese,Copper, Zinc,Cadmium, and Lead in Commercial Vegetable and Rice Baby Foods Using Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) with Central Composite Design (CCD)

Abstract

Herein the bioaccessibility of Mn, Cu, Zn, Cd, and Pb, selected from essential and toxic elements, was determined in commercially sold vegetable purees intended for infant and toddler consumption. Chemical fractionation studies using water, acetone, diethyl ether, chloroform:methanol, and n-hexane were employed to predict the importance of the protein and lipid parts of a matrix to assess the bioaccessibility data. In addition, in-vitro gastrointestinal digestion was performed to determine the bioaccessibility of the elements using a five level, three factor central composite design (CCD) to maximize the elemental solubility. The total elemental concentrations in all of the fractions were determined by inductively coupled plasma – mass spectrometry (ICP-MS). Based on the consumption of one jar of vegetable/rice-based baby food, Zn was 1.3% of the recommended dietary allowance and Mn was 4.2% of the adequate intake level, while Cu was almost 100% of the adequate intake level. Additionally, Pb was always below the detection limit and Cd was sometimes under the detection limit for the percent bioaccessibility. However, in some samples, Cd was as high as 80% of the tolerable weekly intake level depending on the body weight.     

Rapid Synthesis of Nanocrystalline TiO2/SnO2 Binary Oxides and Their Photoinduced Decomposition of Methyl Orange

A rapid and simple method, the so-called stearic acid method (SAM) was developed to prepare nanostructured TiO₂/SnO₂ binary oxides by combustion of stearic acid precursors. The preparative process was studied by Fourier transform infrared spectroscopy (FT-IR). During the preparative process, metal precursors were dispersed in stearic acid at molecular level. Microstructure of the samples was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), BET specific surface area measurement and the results were compared with those obtained by conventional sol-gel method. The photocatalytic decomposition of methyl orange was used as a model system to determine the relative influences of the preparation method and the concentration of SnO₂ on the photocatalytic activities. It was found that preparative methods affected the crystalline structure of TiO₂/SnO₂ powders and the anatase phase of TiO₂ was stabilized by the addition of SnO₂ in SAM. The samples prepared by SAM showed better dispersity, larger specific surface area and the TiO₂/SnO₂ (r=0.15, SAM) catalyst showed higher photocatalytic activity than Degussa P25.     

Acid-catalyzed attack of the dinitrogen ligand in thecis-(Me2PhP)4Mo(N2)2 andtrans-(Ph2PCH2CH2PPh2W(N2)2 complexes by nitronium and nitrosonium cations with the formation of nitrogen oxides

The interaction of labeled dinitrogen complexescis-(Me₂PhP)₄Mo(¹⁵N₂)₂ andtrans-(dppe)₂W(¹⁵N₂)₂ with non-labeled nitronium and nitrosonium fluoroborates,¹⁴NO₂BF₄ and¹⁴NOBF₄, in sulfolane at room temperature in the presence of H₂SO₄ results in rapid formation of labeled nitrous and nitric oxides (¹⁵N¹⁴NO,¹⁵NO), as well as¹⁵N¹⁴N. The yield of the products depends on the reagent ratio and reaches 10–20 mol. % per mole of a complex under optimum conditions. The mechanism of the reactions found is proposed. It involves the step of protonation of the dinitrogen ligand to form the corresponding hydrazido(2–) derivatives, which are then attacked by nitronium or nitrosonium cations. In accordance with the mechanism proposed, it was established that the hydrazido(2–) complexes, (Me₂PhP)₃Mo(¹⁵N₂H₂)Cl₂ and (dppe)₂W(¹⁵N₂H₂)Cl₂, are capable of forming¹⁵N¹⁴NO,¹⁵NO, and¹⁵N¹⁴N under the action of¹⁴NO₂BF₄ and¹⁴NOBF₄ in the absence of an acid.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 13–13, July, 1995.     

基于氮化碳复合材料磁性固相萃取结合高效液相色谱法测定尿液中3种羟基多环芳烃

建立了测定尿液中3种羟基多环芳烃的氮化碳复合材料磁性固相萃取结合高效液相色谱-荧光检测法。所构筑的磁性氮化碳材料，经扫描电子显微镜、X射线衍射仪、振动样品磁强计和比表面积分析仪表征后，用于尿液中3种羟基多环芳烃的富集净化。考察了吸附剂用量、吸附时间、洗脱溶液和洗脱体积（单次洗脱体积×洗脱次数）对萃取效率的影响。结合高效液相色谱-荧光分析，在0.25~250 μg/L范围内线性关系良好（相关系数r=0.999），3种羟基多环芳烃的检出限和定量限分别为0.08和0.25 μg/L，回收率为90.1%~102%，日内和日间精密度分别为1.5%~7.7%和2.2%~8.7%。该本方法简单、快速、高效，可用于尿液中羟基多环芳烃的分析。     

导电高分子材料的应用和进展

论述了复合型及结构型导电高分子材料的导电机理、应用和研究进展。     

热处理对聚乙烯／炭黑导电复合体系形态结构及PTC特性的影响

借助ＷＡＸＤ、ＳＡＸＤ和ＤＳＣ等手段研究了炭黑与聚乙烯复合体系在不同热处理条件下的结晶行为及聚集态结构的大尺寸效应对ＰＴＣ特性的影响。由此提出，不仅结晶度大小，而且聚集大尺寸效应性能对ＰＴＣ行性有重要影响的新观点。     

Deposition of complex multielemental thin films

Modern condensed-matter physics is increasingly concerned with the design, synthesis, analysis, and exploitation of chemically complex materials and structures. Complex metal oxides and strongly correlated electron systems such as YBa₂Cu₃O_7−x and La_1−xSr_xMnO₃ are paradigmatic examples. Their production in the form of high-quality thin films is of both technological and fundamental importance and has stimulated a concerted effort in the last two decades to find and optimize efficient techniques to this end. This review discusses the physics behind and the requirements for synthesizing high-quality films of such materials and examines fundamental aspects of the growth processes associated with magnetron sputtering and pulsed laser deposition, the two techniques which presently offer the best solutions in this burgeoning field.     

Synthesis of pyranosyl amidoximes by addition of amines to pyranosyl nitrile oxides

Addition of amines to pyranosyl nitrile oxides, generated by base-induced dehydrochlorination of the corresponding hydroximoyl chloride, affords pyranosyl N-alkyl/aryl-formamide oximes (41-90%). Reaction with amino acid esters yields the corresponding amidoximes and/or 3-pyranosyl-1,2,4-oxadiazin-6-ones. The structure of N-phenyl-C-(2,3,4-tri-O-acetyl-β-D-xylopyranosyl)formamide oxime was established by X-ray crystallography.     

Comparison between self-reinforced composites based on ultra-high molecular weight polyethylene fibers and isotropic UHMWPE

1. Download : Download high-res image (140KB)
2. Download : Download full-size image

     

纳米多孔双金属氧化物在镍钛合金纤维上的原位生长及其对多环芳烃的选择性固相微萃取

采用阳极氧化法在镍钛合金(NiTi)纤维上原位生长了双金属氧化物纳米孔(NiTiONPs)涂层,通过扫描电镜(SEM)和能谱(EDS)考察了电解质组成和电压对形貌的影响。将NiTiONPs涂层的NiTi纤维与高效液相色谱-紫外检测器联用,研究了4种典型芳香分析物的萃取性能。结果表明,富含TiO2的NiTiONPs涂层对多环芳烃(PAHs)具有良好的萃取效率,尤其对苯并[a]芘的萃取选择性优于市售聚二甲基硅氧烷纤维和聚丙烯酸酯纤维。在优化条件下,PAHs的线性范围为0.05~200μg/L,相关系数均大于0.999,检出限为0.012~0.134μg/L。对单支纤维日内和日间分析的相对标准偏差(RSDs)分别为4.0%~5.5%和6.0%~6.8%,使用分批组装的5支纤维分析的RSDs为6.4%~7.6%。实际水样分析的加标回收率为84.5%~111.5%。所制备NiTi纤维至少可重复使用250次以上,重现性好。