Peritectic phase growth in directionally solidified Cu-70% Sn alloy

The growth mechanism of the peritectic η phase involving the peritectic reaction and peritectic transformation in Cu-70%Sn alloy was investigated under directional solidification. The results show that a major growth mechanism in thickening of the peritectic η-layer is not the peritectic reaction but the peritectic transformation. The transformation temperature and isothermal time play crucial roles in determining the volume fraction and the thickness of the peritectic η phase. With the increase of the temperature and isothermal time, the volume fraction of the peritectic η phase increases. The regressed data show that the relationship between the thickness of η phase (Δx) and the transformation temperature (T) meets the following equation In Δx=6.5−1673 1 / T. Additionally, there exists a relationship between the thickness of the η phase (Δx) and the isothermal time (t) at the 9 mm solidification distance below the peritectic reaction interface, Δx=0.72t ^1/2, which is consistent with the theoretical model. Supported by the National Science Foundation of China (Grant No. 50395102)     

Single＆Two—photon Excited Fluorescence of Two New Compounds with 2—Benzothiazoly as Electron Acceptor

Two new D-x-A type compounds,where electron-donor D is tertiary amino group,electron-acceptor A is 2-benzothiazolyl and x is two conjugated styryl units,have been synthesized.They are named as trans,trans-2-{4-[4-(N,N-diethylamino)styryl]styryl}-1,3-benzothiazole and trans,trans-2-{4-[4-(N,N-diphenylamino)styryl]styryl}-1,3-benzothiazole.Both compounds show strong two-photon excited fluorescence in yellow-orange region when excited by a femtosecond laser at 800nm.     

SrO－La_2O_3／CaO催化剂表面的碱性和催化行为Ⅰ．CO_2－TPD及进料中CO_2对催化行为的影响

添加ＳｒＯ使Ｌａ２Ｏ３／ＣａＯ催化剂的碱性增强及甲烷氧化偶联反应的Ｃ２产率提高，但反应温度随ＳｒＯ含量增加而升高．反应活性高的ＳｒＯ－Ｌａ２Ｏ３／ＣａＯ催化剂，容易被ＣＯ２中毒．催化剂失活的主要原因是表面活性位被碳酸盐覆盖．催化剂失活之前，反应气中添加ＣＯ２可抑制产物中ＣＯ２的生成，提高Ｃ２产率     

金属羰基化合物（CpFe（CO）2）2与金属氧化物表面作用的傅里叶变…

用漫反射红外光谱和光声红外光谱研究了金属羰基化合物（ＣｐＦｅ（ＣＯ）２）２Ｃｐ＝η＾５－Ｃ５Ｈ５与酸性，中性和碱性Ａｌ２Ｏ３及ＴｉＯ２的相互作用，结果表明，在Ａｌ２Ｏ３表面生成的洗生物种类及浓度与Ａｌ２Ｏ３的酸碱度明显相关，在酸性Ａｌ２Ｏ３表面，主要存在衍生物（ＣｐＦｅ（ＣＯ）２Ｆｅ－Ｈ－Ｆｅ（ＣＯ２Ｃｐ）＾＋及少量的ＣｐＦｅ（ＣＯ）２（－Ｏ－）；在中性Ａｌ２Ｏ３表面存在的ＣｐＦｅ（ＣＯ）２（－Ｏ     

EXAFS研究负载型Ni／SiO2的区域结构

实验结果表明改进的实验室ＥＸＡＦＳ谱仪测试Ｎｉ箔的Ｋ吸收得到的ＥＸＡＦＳ谱与同步辐射上测量Ｎｉ箔得到的ＥＸＡＦＳ谱相近，利用实验室ＥＸＡＦＳ方法也可开展较好的结果测量研究，在ＳｉＯ２粉末载体上Ｎｉ负载量变化的ＥＸＡＦＳ结果表明，随着Ｎｉ负载量的降低，Ｎｉ的径向结构函数主配位峰的位置Ｒ＝０．２２０ｎｍ保持不变，但振幅强度逐渐降低。负载量从Ｎｉ箔到２．５％Ｎｉ／ＳｉＯ２，无序度因子σ由０．００６８ｎｍ     

正丁基苝四羧酸二酰亚胺的晶型和性能研究

文章合成了N,N'-二正丁基苝四羧酸二酰亚胺,并纯化、调晶,进行了IR、元素分析、X射线等测定.分析该化合物在DMF中的紫外光谱(最大吸收波长524.80 nm)、荧光光谱(最大发射波长539.0 nm)、Stokes位移(数值15 nm)等光谱性质.在400～700 nm范围内,α晶型薄膜紫外-可见吸收出现很强的吸收峰,且由β型变为α型,最大吸收波长有明显的红移(545 nm变为580 nm).X射线粉末衍射也反映出α晶型的2θ在26.0°处衍射峰CPS为2 508,β型在25.2°为1 891.α,β晶型作为电荷产生材料制得的功能分离型有机光导体,在光源滤波波长λ=532 nm曝光下,测得含α,β感光体达到饱和电位的时间分别为46,93.98 s,光衰电位(5.3千伏电压负充电电晕,1～2 s后的表面电位)分别为727和525 V,半衰曝光量分别为4.32,4.34μJ·cm-2,残余电位分别为30和45 V等光导性能数值.