Regioselective synthesis of 1,4-disubstituted 1,2,3-triazoles via three-component coupling of secondary alcohols, TMSN3 and alkynes

1,4-Disubstituted 1,2,3-triazoles are obtained in excellent yields via a three-component coupling of secondary alcohols, alkynes and trimethylsilyl azide (TMSN₃). This one-pot reaction occurs through in situ generation of an azide from the alcohol and TMSN₃, followed by 1,3-dipolar cycloaddition of the terminal alkyne to afford the corresponding disubstituted triazoles.     

Photoelectron core levels for enargite,Cu3AsS4

The mineral chemistry of enargite surfaces and near‐surfaces prepared by fracture within an ultrahigh vacuum are investigated using XPS and synchrotron radiation XPS (SRXPS). The purpose of the study is to identify surface core‐level line positions in high‐resolution photoelectron spectra. The XPS spectra obtained using monochromatic Al Kα radiation show that there are near‐identical monosulphide line positions in S 2p spectra for the As–S and Cu–S bonds in enargite. The SRXPS spectra for sulphur are remarkably similar to the XPS spectra for sulphur, showing that there is minimal difference in the chemical environment between sulphur atoms at the surface and in the mineral matrix. The Cu 2p XPS data have only cuprous contributions and a minor surface contribution. The surface Cu contribution is observed as a high‐binding‐energy tail in the Cu 2p_3/2 spectrum. The As 3d data for both XPS and SRXPS show contributions from arsenic atoms at the surface and in the bulk mineral matrix. The surface contribution is distinct and is found 1 eV below the bulk contribution. The results of the study suggest that, following fracture, the enargite surface is reorganized in such a manner that the surface is characterized by protrusions of individual arsenic atoms. Copyright © 2004 John Wiley & Sons, Ltd.     

卡尔曼滤波析相光度法同时测定锰铁铜锌镉的研究——5-Br-PADAP—Triton X-100体系

运用卡尔曼滤波递推法,以2-(5-溴-2-吡啶偶氮)—5-二乙氨基苯酚(5-Br-PADAP)为显色剂,建立了同时测定锰、铁、铜、锌、镉析相光度法.在pH9.0硼酸-氢氧化钠介质中,胶束溶液在95℃加热1h,配合物被Triton X-100相完全富集,最大吸收峰分别为锰566nm、铁556nm、铜560nm、锌562nm、镉557nm,工作曲线范围除镉为0～8μg/5ml外,其余均为0～10μg/5ml.应用于大米中锰铁铜锌镉的同时测定,结果满意.     

Verfeinerung der Kristallstruktur von Kupfer(II)-hydroxichlorid,Cu(OH)Cl

The crystal structure of Cu(OH)Cl [a=5.555 (2) Å,b=6.671 (4) Å,c=6.127 (2) Å, =114.88 (3)°, space group P2_I/a,Z=4] was refined for 810 observed reflections with sin /0.80 Å^–1 toR=0.035. Crystals were synthesized under hydrothermal conditions. The copper atom is planar four coordinated by three oxygen atoms and one chlorine atom; two further chlorine atoms complete its coordination. The copper polyhedra share edges to build up sheets, which are connected by hydrogen bonds to the chlorine atoms of adjacent sheets.

     

Copper(I) and silver(I) complexes of bridging bis(quinaldinyl)phenylphosphine oxide ligand

Abstract

A novel tertiary phosphine oxide containing two quinaldinyl substituents has been synthesized according to adapted literature procedures. Its coordination properties toward Cu(I) and Ag(I) were investigated and the resulting complexes were analyzed by single crystal X-ray diffraction. Multinuclear complexes are formed, wherein the ligand is bridging across two metal centers. Though for the silver complex, no argentophilic interactions are present. The copper complex was characterized further by multinuclear NMR spectroscopy at variable temperatures.     

FT合成沉淀Fe／Cu／K催化剂有效因子的计算Ⅰ．工业颗粒催化剂有效因子的计算

用包括水抑制作用的动力学方程，根据建立的反应扩散模型和ＦＴ合成化学计量关系，计算了工业原颗粒ＦＴ合成沉淀Ｆｅ／Ｃｕ／Ｋ催化剂在工业操作条件下的有效因子。根据不同的产物组成，建立了三种化学计量关系式，比较了气相反应和气液反应的有效因子，确立了ＦＴ合成沉淀Ｆｅ／Ｃｕ／Ｋ催化剂有效因子的计算方法。在ＦＴ合成反应条件下，产物蜡充满了催化剂的微孔，各组分在蜡中的扩散系数要比纯气相中的扩散系数小得多。在工况操作条件下（５２３Ｋ，２．５ＭＰａ，５００ｈ￣（－１），尾气循环比３．０），工业原颗粒（ｄ＿ｐ＝２．５ｍｍ，ｌ＿ｐ＝５～１０ｍｍ）催化剂的实际有效因子是纯气相反应的一半左右，计算的平均有效因子分别为０．４０和０．４２。     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.     

金属铜升温熔化过程的分子动力学模拟

采用分子动力学方法模拟了金属铜的升温熔化过程.原子间作用势采用FS (Finnis-Sinclair)势，结构分析采用双体分布函数(PCF)、均方位移(MSD)等方法.计算结果表明,在连续升温过程中，金属铜在1444 K熔化，在该熔化点的扩散系数为4.31×10－9 m2•s－1.上述结论与实验值相当接近，并且比之采用EAM镶嵌原子势所作模拟得到的结果更佳，说明FS势可以用来处理象液铜这样较复杂的无序体系.本文指出了升温速率在金属熔化过程中所起的作用.     

Crystal Structure of Cu(hfac)2 Complexes with Organomercury Binitroxide

The organomercury biradical HgL₂ (L is deprotonated 4,4,5,5-tetramethyl-2-imidazoline-3-oxide-1-oxyl) is capable of performing the bridging function for design of multinuclear heterospin systems. This paper describes synthesis and crystal structure of HgL₂ and the first multinuclear complexes of Cu(hfac)₂ with HgL₂.     

INTRAPARTICLE DIFFUSION EFFECTS IN FISCHER-TROPSCH SYNTHESIS Ⅰ. MODELING OF DIFFUSION AND REACTION

IntroductionCatal}ticrcactionsaffcctcdb}'diffosionaIlimitationincatal}'stporcshavcbccnextensive1}dcaltx`ithinlit.rat.rcll~5I.Scvcraltcchniqucsonthcspccialcase0fFischcr-Tropschs}'nthcsis(FTS)t\crcapplicdtocxplorcthebchaviorofthiscatal}ticrcactionundercxpcrimcntalandopcrationaIconditionsI3~5l.It`"ouldbeofvaluctoindicatchcrcthatthcseinvcstigationsx"ercmainl}'bascdonthesimplcstkineticsofthcfirstordcrinH2proposedbyAndersonl6]attheearIystages.However-thesetboents,striCtlyspeaking,areinvalidfor…