Determination of trace elements in biological materials using tetramethylammonium hydroxide for sample preparation

A method to prepare milk powder, bovine liver and bovine muscle samples for analysis by electrothermal atomic absorption spectrometry (ETAAS) is proposed. Samples are mixed with a small amount of tetramethylammonium hydroxide (TMAH) and a stable and homogeneous slurry is produced in ca. 2 h with heating at 60–70 °C. After such sample preparation and dilution with water, trace elements are determined in certified reference materials. Pyrolysis and atomisation temperatures are optimised for each element, and several modifiers are investigated. External calibration is used for every analyte. Limits of detection (LODs), precision and accuracy are reported for Cd, Pb, Ni, Cr, Cu and Ag and compared with those obtained after conventional acid digestion. The main advantages of the proposed method are the simplicity of sample preparation and the longer lifetime of the graphite tube.     

Synthesis, structure and physical properties of Ru ferrites: BaMRu5O11 (M=Li and Cu) and BaM′2Ru4O11 (M′=Mn, Fe and Co)

The synthesis, structure, and physical properties of five R-type Ru ferrites with chemical formula BaMRu₅O₁₁ (M=Li and Cu) and BaM′₂Ru₄O₁₁ (M′=Mn, Fe and Co) are reported. All the ferrites crystallize in space group P6₃/mmc and consist of layers of edge sharing octahedra interconnected by pairs of face sharing octahedra and isolated trigonal bipyramids. For M=Li and Cu, the ferrites are paramagnetic metals with the M atoms found on the trigonal bipyramid sites exclusively. For M′=Mn, Fe and Co, the ferrites are soft ferromagnetic metals. For M′=Mn, the Mn atoms are mixed randomly with Ru atoms on different sites. The magnetic structure for BaMn₂Ru₄O₁₁ is reported.     

Simultaneous determination of cobalt,copper, iron and vanadium in crude petroleum oils by HPLC

Summary A method has been developed for the simultaneous formation and solvent extraction of cobalt (II), copper (II), iron (II) and vanadium (IV) complexes of bis (acetylpivalylmethane)ethylenediamine (H₂APM₂en) in methyl isobutyl ketone. The complexes are eluted from a reversed phase HPLC column with a mixture of methanol:water:acetonitrile and detection was at 260 nm. The method has been applied to the simultaneous determination of cobalt, copper, iron and vanadium in crude petroleum oils at the ng level.     

Based on MFe2O4 (M=Co,Cu, and Ni): Magnetically recoverable nanocatalysts in synthesis of heterocyclic structural scaffolds

Abstract

Catalysis research under magnetically recoverable nanocatalysts is a well-known topic in organic synthesis. In recent times, catalysis research has clearly experienced a renaissance in the area of utility of ferrite nanoparticles based on their ability to recovery and reusability. In this review, the focus is on the fabrication, characterization and of application the MFe₂O₄ (M=Co, Cu, and Ni) nanocatalysts in synthesis of heterocyclic structural scaffolds.     

Decomposition of vegetables for determination of Zn,Cd, Pb and Cu by stripping voltammetry

A simple and accurate digestion method using nitric acid, perchloric acid and hydrogen peroxide has been developed for use in trace analysis for heavy metals in vegetables by differential pulse anodic stripping voltammetry. The recovery of the metals from the samples is lower if the hydrogen peroxide is omitted from the digestion mixture. Standard reference materials have been analysed satisfactorily by this method.     

Reaction and mass transfer effects in a catalytic monolith reactor

Zeolite-based monoliths (Cu/ZSM-5 on cordierite) are prepared and used to catalyze direct decomposition of nitrogen monoxide. Two-dimensional heterogeneous model is applied to describe the behavior of the monolith reactor, with the emphasis on the features introduced due to coupling of flow, mass transfer and chemical reaction. The proposed model has been verified by comparing computer simulation data with laboratory experimental data. It is shown that both inter- and intraphase diffusion limitations have to be considered when modeling complex reactor configuration, such as monolith reactors, especially when monolith with thicker catalytic layer are used at higher temperatures.     

Improvement of direct determination of Cu and Mn in seawater by GFAAS and total elimination of the saline matrix with the use of hydrofluoric acid

Hydrofluoric acid, added to seawater, can assist in the removal of chloride in the drying step by precipitating fluoride salts, thus suppressing the chloride interference effects induced on the atomization signals of Cu and Mn. By adding HF to seawater before the analysis, MgF₂ and CaF₂ are precipitated at the bottom of the sampling flask, without precipitating Cu and Mn, and are consequently not introduced into the graphite furnace. Because sodium salts are eliminated at the pretreatment step, the whole seawater matrix is eliminated before the atomization of Cu or Mn. Therefore, the analyzed volume of seawater can be increased by using the multi-injection procedure without degradation of the limit of detection and risks of spectral interferences. The limit of detection obtained for Cu and Mn are 0.05 and 0.01 μg L⁻¹, respectively, for a 50 μL analyzed seawater volume.     

SMAI法制备的Cu催化剂的CO加氢催化

用溶剂化金属原子浸渍（SMAI）法制备了SiO2、Cr2O3负载Cu催化剂.XPS测定表明三种载体上的Cu几乎全部以零价态存在．X射线增宽法测定表明随着Cu含量增加Cu颗粒增大．Cu催化剂在CO加氢中的催化活性与载体、Cu颗粒大小和Cu价态有关．Cr2O3对Cu催化活性有促进效应．Cr2O3负载Cu催化剂活性随Cu颗粒减小而增大，而SiO2作载体时，颗粒大小对活性无影响，零价Cu0为催化活性中心     

金负载量对低温水煤气变换Au/α-Fe2O3催化剂结构和性能的影响

采用共沉淀法制备了低温水煤气变换Au/α-Fe2O3催化剂。通过正交实验优化催化剂的还原活化条件，考察了金负载量对催化剂性能的影响。采用BET、XRD、UV-VIS、XRF、H2-TPR和O2-TPO等表征手段对催化剂的结构进行分析，并与其催化性能进行关联。结果表明，（1）采用10%-H2/N2还原气将催化剂在150 ℃原位还原9 h，其催化活性最高；（2）金的最佳负载量为8.00%，此时在催化剂制备过程中金的流失量较少，金粒子较小，也有利于抑制催化剂在反应过程中烧结；（3）TPR-TPO结果表明，金的负载量为8.00%时，Au/α-Fe2O3催化剂具有较易被还原、不易被氧化的性质，从而显示出最高催化活性。（4）Au/α-Fe2O3催化剂中的金以单质金（Au0）形式存在；其高活性与Au0-Fe3O4间的协同作用有关。     

Chemical environment of copper at the surface of a CuAl2 model alloy: XPS,MEIS and TEM analyses

Air‐formed oxide on a CuAl₂ model alloy is shown to be free of copper species, with copper enriching in the alloy. With thickening of the oxide by anodizing, copper enriches further to a critical concentration at which its oxidation proceeds with incorporation of Cu(II) species into the film. Such species migrate more rapidly through the film than aluminium species. Incorporation of copper species is associated with generation of oxygen gas within the film and subsequent film rupture is due to release of the gas. Reduction of Cu(II) to Cu(I) species during XPS analysis is characterized and the accelerating role of charge neutralizing is highlighted. Copyright © 2004 John Wiley & Sons, Ltd.