Creep of composites with a porous fibre/matrix interface under variable loading

A micromechanical model of island-type fibre/matrix interface is described and experimental data are represented and analysed. Changes in the interface strength during a cycle loadings and, correspondingly, changes in the creep resistance of a composite due the island-like scheme of the fibre/matrix interface are described.     

甲基百里(香)酚蓝新负载树脂的特 性及应用

本文以金属指示剂甲基百里(香)酚蓝作为鳌合剂制得具有相应鳌合基团的负载树脂.研究了该树脂的某些分析特性及其在富集天然水中微量铜、钻、镍、锌中的应用.     

铜、锌在5-Br-PADAP和表面活性剂体系中的分光光度法同时测定

5一Br—PADAP在阳离子表面活性剂溴代十六烷基三甲胺存在下同时测定Cu^2 和Zn^2 ，找出最佳实验条件，对水和血清测定结果令人满意．     

承受拉-扭组合载荷的薄壁圆筒屈服时产生塑性流动的条件

提出了在无外力作功的情况下，具有Bauschinger效应的弹塑性材料处于屈服状态产生自发的塑性流动时应满足的条件．这个条件不仅与材料的力学性能有关，而且还处决于材料的具体的载荷边界条件和变形．举例说明了承受拉一扭组合的薄壁圆筒中，采用组合强化模型时，产生塑性流动的具体条件．     

Determination of optical nonlinearities in Cu(mpo)2 by Z-scan technique

The optical nonlinearities of Cu(mpo)₂ [formula = C₁₀H₈N₂CuO₂S₂] complex have firstly been investigated by using the Z-scan technique with a nanosecond-pulsed Nd:YAG laser at its second harmonic (532 nm) radiation. The nonlinear optical absorption and refraction coefficients of Cu(mpo)₂ have been measured with the different on-axial peak irradiances I ₀ at the waist ranging from 0.48 to 5.66 GW/cm². The nonlinear transmittance characteristics exhibit the near resonant two-photon absorption (TPA) at 532 nm and are explained by a population redistribution model. The nonlinear absorption originates from the near resonant TPA while the mechanism of the nonlinear refraction is the near resonant TPA transition enhancement. The linear increasing dependences of the optical nonlinearities on the incident irradiance arise from the population redistribution due to the near resonant TPA.     

冲击载荷下剪切断裂研究

利用Hopkinson压杆技术对单边平行双裂纹试样倒向加载，在较大的加载率范围，对Ti6Al4V钛合金和40CrNiMoA两种材料的动态剪切断裂行为进行了研究．实验结果表明：存在两类韧性剪切断裂模式，即常规的韧性剪切型断裂和绝热剪切断裂．常规剪切型断裂模式的断裂韧性KⅡd随加载率的提高而增大，而绝热剪切型的断裂韧性KⅡd则随加载率的提高而减小，并且，当加载率增大至某一临界值时，常规的韧性剪切断裂模式将转变为绝热剪切断裂破坏模式．     

Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.     

A 3D-BPP approach for optimising stowage plans and terminal productivity

This paper addresses the problem of determining stowage plans for containers in a ship, that is the so-called master bay plan problem (MBPP).     

直线加速器驻波腔中的瞬态束流负载效应

在高能加速器中, 随着单个束团和束团串中电荷量的提高, 当粒子束穿过加速腔的时候, 感应出的瞬态束流负载电压也越来越高. 但是, 在通常分析束流负载的时候, 往往对稳态束流负载研究的比较多, 而对瞬态束流负载的研究要相对少一些. 本文首先对束流负载的瞬态特性和束团穿过加速腔时高频源所看到谐振腔谐振频率的变化方式进行了分析, 然后又对两种情况下谐振腔的最优失谐条件进行了讨论, 并给出了相应的解析公式. 在第1种情况下, 当粒子束穿过加速腔的时候, 谐振腔的自然谐振频率能够及时地得到调节, 从而使高频源的电流与谐振腔的腔压同相, 以提高高频源的效率; 在第2种情况下, 当粒子束穿过加速腔的时候, 谐振腔的自然谐振频率保持不变, 不能被调节. 最后, 还对BEPCⅡ现有预注入器的预聚束腔、BEPCⅡ未来预注入器的两个次谐波聚束腔中的瞬态束流负载效应进行了分析.     

CuO—ZnO／Al2O3—TiO2催化剂中TiO2的结构和电子效应

采用XPS,XRD,TPR,TPD和指标反应等方法研究了TiO_2在负载型CuO-ZnO/Al_2O_3-TiO_2催化剂中所起的作用.发现TiO_2起双重作用,即结构效应和电子效应,TiO_2的结构效应主要表现为它改善了CuO在载体上的分布.TiO_2的电子效应表现为它对Cu~0具有吸电子的作用,从而削弱了Cu和S之间的吸附力,使S容易脱除.另外,部分还原形成的Ti~(3+)具有促进CuS中的Cu~(2+)还原为Cu~0的能力,TiO_2的上述效应的综合结果使催化剂的抗硫中毒性能大大增强.