Enhancement of photosensitivity in bismuth doped Cu2ZnSnS4 thin films

In this paper, the effect of bismuth doping on the structural, morphological, optical and electrical properties of Cu₂ZnSnS₄ (CZTS) films has been investigated. The undoped and bismuth doped CZTS films (0, 0.5, 1, 1.5 and 2 mol%) were deposited on glass substrates by solution based method. The XRD result shows a significant improvement in the crystallinity of the films with increase in bismuth concentration. The Raman spectra of the films show the dominant peak at 334 cm^–1 corresponding to A₁ vibrational mode of CZTS kesterite phase. The FESEM micrographs of the films show an enhancement in the grain size and densification with the addition of bismuth ion concentration. The optical bandgap of the films was found to vary (1.59–1.40 eV) with the doping of bismuth ions. The I –V characteristics indicate twofold increment in the photoconductivity for the bismuth doped CZTS films under 100 mW/cm² illumination suggesting their potential application in photovoltaic devices. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Tribological Behavior of Multiply-Alkylated Cyclopentanes (MACs)-Cu Nanoparticles Composite Thin Film

Multiply-alkylated cyclopentanes (MACs) composite thin films containing Cu nanoparticles are fabricated on the octadecyltrichlorosilane (OTS)-modified substrate by a spin-coating technique. The thickness, wetting behavior, and nanoscale morphologies of the films are characterized by means of ellipsometry, contact angle measurement, and atomic force microscope (AFM). The friction and wear behaviors of the thin films sliding against Si₃N₄ ball are examined on a UMT-2MT tribometer in a ball-on-disk contact mode. The worn surfaces of the OTS-MAC-Cu composite film and the counterpart Si₃N₄ balls are investigated with a scanning electron microscope. Water contact angle on OTS-MAC-Cu composite film is higher than that of OTS-MAC film. OTS-MAC-Cu composite film exhibits higher load-carrying capacity and better friction reduction and antiwear behavior as compared with OTS-MAC film. This may be attributed to the load-carrying and self-repairing property of the Cu nanoparticles in the composite film and the formation of a transfer layer composed of OTS, MAC, and Cu on the rubbing surface of the counterpart ball.     

A validated HPLC‐PDA method for identification and quantification of two bioactive alkaloids,ephedrine and cryptolepine,in different Sida species

A simple, rapid, accurate and reproducible reverse‐phase HPLC method has been developed for the identification and quantification of two alkaloids ephedrine and cryptolepine in different extracts of Sida species using photodiode array detection. Baseline separation of the two alkaloids was achieved on a Waters RP‐18 X‐terra column (250 × 4.6 mm, 5 µm) using a solvent system consisting of a mixture of water containing 0.1% Trifluoroacetic acid (TFA) and acetonitrile in a gradient elution mode with detection at 210 and 280 nm for ephedrine and cryptolepine, respectively. The calibration curves were linear in a concentration range of 10–250 µg/mL for both the alkaloids with correlation coefficient values >0.99. The limits of detection and quantification for ephedrine and cryptolepine were 5 and 10 µg/mL and 2.5 and 5 µg/mL, respectively. Relative standard deviation values for intra‐day and inter‐day precision were 1.22 and 1.04% for ephedrine and 1.71 and 2.06% for cryptolepine, respectively. Analytical recovery ranged from 92.46 to 103.95%. The developed HPLC method was applied to identify and quantify ephedrine and cryptolepine in different extracts of Sida species. Copyright © 2013 John Wiley & Sons, Ltd.     

The Determination of Trace Elements by Flame Atomic Absorption Spectrometry: Effect of the Composition of Standard Solution Matrices

Abstract

The effect of using solution matrices in calibration standards different from those employed for the extraction steps in the determination of Cd, Cr, Cu, Ni and Zn were tested. Cu and Zn are little affected by matrix effects but, if the extractant is ammonium acetate, the use of other matrices may result in too high Cd, Cr and Ni values.     

Reactivity studies of carbon,phosphorus and sulfur‐based acyl sites with tertiary oximes in gemini surfactants

Kinetic studies of the reactions of tertiary oximes (monoisonitroso acetone; MINA and butane 2,3 dione monooxime; BDMO) with some carboxylate (p‐nitrophenyl acetate and p‐nitrophenyl benzoate), phosphate (p‐nitrophenyl diphenyl phosphate and bis (2,4‐dinitrophenyl) phosphate) and sulfonate (p‐nitrophenyl p‐toluene sulphonate) esters in gemini surfactants have been conducted. The observed first‐order rate constant versus surfactant profiles show micelle‐assisted bimolecular reactions involving interfacial ion exchange between bulk aqueous media and micellar pseudophase. Experimental results showed that MINA exhibited better nucleophilic activity towards ester cleavage than BDMO. Pseudophase model has been applied in order to determine micellar second‐order rate constants and binding constants. Copyright © 2013 John Wiley & Sons, Ltd.     

Indications of bulk property changes from surface ion implantation

In the majority of cases, the effects of ion implantation are confined close to the implant zone but, potentially, the resultant distortions and chemical modifications could catalyse relaxations extending into the bulk substrate. Such possibilities are rarely considered but the present data suggest that high dose ion implantation of ZnO has induced bulk changes. Surface implants with Cu and Tb strongly modified the low temperature bulk thermoluminescence properties generated by X-ray irradiation. Suggestions are proposed for the possible mechanisms for bulk relaxations and structural characteristics, which may indicate where such instability may occur in other lattice structures.     

An optical study of the D-D neutron irradiation-induced defects in Co-and Cu-doped ZnO wafers

Room-temperature photoluminescence and optical transmittance spectroscopy of Co-doped(1×1014,5×1016,and 1×1017cm-2) and Cu-doped(5×1016cm-2) ZnO wafers irradiated by D-D neutrons(fluence of 2.9×1010 cm-2) have been investigated.After irradiation,the Co or Cu metal and oxide clusters in doped ZnO wafers are dissolved,and the wu¨rtzite structure of ZnO substrate for each sample remains unchanged and keeps in high c-axis preferential orientation.The degree of irradiation-induced crystal disorder reflected from the absorption band tail parameter(E0) is far greater for doped ZnO than the undoped one.Under the same doping concentration,the Cu-doped ZnO wafer has much higher irradiation-induced disorder than the Co-doped one.Photoluminescence measurements indicate that the introduction rate of both the zinc vacancy and the zinc interstitial is much higher for the doped ZnO wafer with a high doping level than the undoped one.In addition,both crystal lattice distortion and defect complexes are suggested to be formed in doped ZnO wafers.Consequently,the Co-or Cu-doped ZnO wafer(especially with a high doping level) exhibits very low radiation hardness compared with the undoped one,and the Cu-doped ZnO wafer is much less radiation-hard than the Co-doped one.     

激光能量对激光诱导Cu等离子体特征辐射强度、电子温度的影响

利用Nd:YAG激光(波长1 064 nm,脉宽10 ns)烧蚀金属Cu靶获得等离子体 .改变激光脉冲能量,观测到Cu的原子谱线和离子谱线随激光脉冲能量有不同的变化关系, 但都在330 mJ/pulse时,谱线强度达到最大,随后在330 mJ～370 mJ/pulse间出现一小平台 ,能量继续增加,各谱线强度减小.同时,使用烧蚀Cu靶产生的五条原子谱线(465.11 nm,5 10.55 nm,515.32 nm,521.82 nm,529.25 nm)的相对强度,在局部热力学平衡近似下,利用B oltzmann图的最小二乘法拟合,测定了不同激光能量下Cu等离子体的电子温度.随激光能量的增加,电子温度近似单调地从1.02×104 K上升到1.46×104 K后,反而有所下降.     

Binuclear ruthenium(II) pyridazine complex catalyzed transfer hydrogenation of ketones

A convenient and general method of synthesis of binuclear ruthenium(II) pyridazine complex was reported. The synthesized complex was characterized by analytical and spectral methods. The structure of the complex was confirmed by X-ray diffraction technique and was found to be an efficient catalyst for the transfer hydrogenation of ketones with excellent conversions in the presence of isopropanol/KOH at 82 °C. The effect of solvents, bases, and different catalyst/substrate ratio for the reaction was also investigated.